曲面和任意取向表面表面摩阻油膜测量法的进展

本文叙述曲面和任意取向表面表面摩阻测量方法的进一步的发展。介绍用漫射照明获取薄油膜等厚度干涉条纹谱的理论根据和实验结果。讨论了通过油流显示图像的分析,自动探测表面流线方位的可能性。所得结论表明油膜法也能应用于复杂的三维流动。     

弹道靶中超高速发射弹的流场及空气动力特性研究(英)

本文描述的是研究爆炸成型发射弹（ＥＦＰ）模型的流场及超高速空气动力特性所用的弹道试验设备;简要报导了记录全尺寸干涉图形的技术;对径向密度分布再现的方法进行了讨论;在零攻角实验时不同模型的空气动力阻力是采用简化方法来计算的;对各种不同ＥＦＰ型式的气动稳定性提出了定性估计的方法;并阐述了用于组合体超高速飞行特性研究的数值计算技术的基本原理     

收敛形进气道数值研究的验证

介绍一种新型的、具有最小喉道面积的三维高超声速进气道 (称之为收敛形进气道 )的数值和实验研究结果。表明使用这种形式的进气道 ,在整个飞行速度范围内可以降低阻力和高超声速发动机表面的热防护要求 ,通过降低外压缩表面的倾斜度和减少进气道及燃烧室壁的面积就可以做到这一点。在采用低维次流动的气体动力设计方法的基础上设计成这种形式的进气道。计算是在无粘气体模型构架内用有限体积法进行的。同时用边界层方程计算出计及粘性的气流特性和进气道特性。数值算法是通过收敛形进气道的有限宽楔形外压缩表面的计算和实验数据来验证的。进行实验研究的马赫数M=2～ 1 0 7,基于模型进气道高度的雷诺数Re=( 1～ 5) × 1 0 6。数值计算与实验结果一致性很好。这些结果也和通常的二维进气道的数据作了比较。     

褶皱结构成形时的形状偏差计算

解决了褶皱结构成形时相邻的平行四边形平面元素之间连接区棱的修圆半径值预测问题。把毛坯模拟成薄板，定义了平行四边形平面元素的边界条件，采用能量法导出挠度和力函数的非线性微分方程组，利用积分－差分法实现其数值解，并提供计算结果和分析应力－应变场。采用的计算方法可用于研究毛坯的刚度参数和工艺参数对褶皱结构的形状影响。     

用薄板等积变换方法制造起伏构造的工艺问题研究(英文)

研究了用于夹层壁板的新型轻质芯材的制造问题。该种芯材是一种可改变平面方向的褶皱构造。采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。其主要难点在于 ,必须实现沿复杂的展开图上所有的画线同时弯曲。现借助于成形过程中使原来的构形组件变形解决其造型问题。本文提出的工艺方法可用于不同材料的深度起伏构造制造 ,如金属薄板和纸等。     

Dynamics of Planetary Waves in the Ionosphere as Observed from GPS Satellites

The GPS satellite data are used to study the dynamics of the ionospheric total electron content (TEC) over Central Europe in the summer season from June 23 to September 30, 1996. The TEC variations within the range of periods typical of the planetary waves were found to be nearly synchronous with the neutral wind variations in the mesosphere and with the variations in the occurrence of ionospheric sporadic layers. The observed TEC variations were interpreted as the result of penetration of energy carried by nonstationary Rossby waves to the upper atmospheric altitudes.     

Orbiting solar telescope on “Salyut-4” station

The orbiting solar telescope on Salyut-4 (F = 2,5 m, d = 250 mm) produces images of the Sun on the entrance slit of a stigmatic two-grating spectrograph (R₁ = 1 m, N₁ = 1200 lines/mm; R₂ = 0.5 m, N₂ = 2400 lines/mm, dispersion 16 Å/mm, spectral resolution 0,3 Å). The automatic system keeps the observed solar features on the slit of the spectrograph with an accuracy of 3–4 arc sec. The far UV-spectra (970–1400 Å) of solar flares, brightenings, flocculi and prominences were photographed and fresh coatings of mirrors were made during the flight.     

Advanced Pulsed Plasma Thrusters and Their Application as a Part of Small Spacecraft Propulsion Systems

The paper presents the research results of the effect of a capacitor energy storage device configuration on the specific characteristics of advanced modern propulsion systems based on the ablative pulsed plasma thrusters (APPT). These thrusters are designed to perform specific tasks within the small spacecrafts with the onboard power capacity up to 200 W.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.