纤维增强热塑性塑料中纤维含量的精确调控

研究了双螺杆挤出机生产纤维增强热塑性塑料时,纤维股数、双螺杆转速、塑料喂料量与纤维含量的关系,通过调节此三个参数,纤维含量可精确控制在±0.1wt％的范围内.当主机螺杆转速和塑料喂料量,或纤维股数和塑料喂料量同时增加,挤出造粒产量将提高相同倍数,而纤维含量保持不变.本方法高效可行、精确可控,容易为操作者所掌握,特别适用于指导生产实践.     

基于智能化制造思想的测控-加工一体化技术的发展应用

智能化制造是集成了信息获取、处理、反馈和相应多项技术的系统工程.智能化制造通过对制造流程中的信息进行自动感应和自主反应,形成了制造过程中的神经网络.     

Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling

Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the complicated mechanical properties of a planetary regolith, suitable drilling parameters should be matched with different drilling formations properly. Otherwise, drilling faults caused by overloads could easily happen. Hence, it is necessary to estab-lish a drilling load model, which is able to reveal the relationships among drilling loads, an auger's structural parameters, soil's mechanical properties, and relevant drilling parameters. A concept for the filling rate of auger flute (FRAF) is proposed to describe drilling conditions. If the FRAF index under one group of drilling parameters is less than 1, this means that the auger flute currently removes cuttings smoothly. Otherwise, the auger will be choked with compressed cuttings. In dril-ling operations, the drilling loads on the auger mainly come from the conveyance action, while the drilling loads on the drill bit primarily come from the cutting action. Experiments in one typical lunar regolith simulant indicate that the estimated drilling loads based on the FRAF coincide with the test results quite well. Based on this drilling load model, drilling parameters have been opti-mized.     

Glacier mapping based on rough set theory in the Manas River watershed

Precise glacier information is important for assessing climate change in remote mountain areas. To obtain more accurate glacier mapping, rough set theory, which can deal with vague and uncertainty information, was introduced to obtain optimal knowledge rules for glacier mapping. Optical images, thermal infrared band data, texture information and morphometric parameters were combined to build a decision table used in our proposed rough set theory method. After discretizing the real value attributes, decision rules were calculated through the decision rule generation algorithm for glacier mapping. A decision classifier based on the generated rules classified the multispectral image into glacier and non-glacier areas. The result of maximum likelihood classification (MLC) was used to compare with the result of the classification based on the rough set theory. Confusion matrix and visual interpretation were used to evaluate the overall accuracy of the results of the two methods. The accuracies of the rough set method and maximum likelihood classification were compared, yielding overall accuracies of 94.15% and 93.88%, respectively. It showed the area difference based on rough set was smaller by comparing the glacier areas of the rough set method and MLC with visual interpreter, respectively. The high accuracy for glacier mapping and the small area difference for glacier based on rough set theory demonstrated that this method was effective and promising for glacier mapping.     

唐长红飞机设计专家

():您两次被任命为总设计师,是否感受到了压力?您是如何面对这些压力的?唐长红:当年接新"飞豹"的时候,有种"初生牛犊"的感觉,而且,当时做过"飞豹"飞机的老同志还有很大一批在岗,所以感觉能减轻一些压力;接国家重点项目的时候,我感觉压力很大.毕竟,这个项目台阶更高、国人寄托的期望更大,而且是亟需的装备.特别是我们的工业基础还有待提高,所以压力还是很大的.     

低速全模颤振试验悬挂支撑系统

为适应日益增多的低速风洞全模颤振试验的需要,发展颤振试验技术,在气动中心低速所3．2m 风洞建立了一套通用的悬挂支撑系统。该悬挂系统分为垂直和水平两部分,水平悬挂系统由水平钢索装置和张紧机构组成。系统可提供模型沉浮、俯仰、横侧向、偏航和滚转5个方向的自由度;可单独改变模型某一方向的自由度而不影响其它方向的自由度;可确保模型上下、左右、前后位置都处于试验段正中心;可方便地调整模型的迎角和滚转角。对采用该悬挂系统的颤振模型,文中提供了技术要求和参数选择方法。采用同一颤振模型在3．2m 风洞与TsAGI的T-103风洞进行了对比试验,得到的颤振临界速度、频率基本一致,证明该套悬挂系统设计合理,可以应用于低速全模颤振试验。     

识别民机产业发展特点 提高民用航空产品研发水平

就基本的管理规律和参数而言,所有航空产品的研制基本一致,但因为市场和客户的不同,民用航空产品研制在体系建设和技术覆盖面方面有自己的特点,尤其是适航规章要求和客户使用环境不同,使得民用航空产品的研制必须要更多地把产品全寿命周期的技术成功和运行支持纳入早期的研制活动,这必然带来在研制体系和技术能力建设方面的差异化,而早日识别和把握这些差别是民用航空产品产业健康发展的必须。     

紧固件柔度系数研究

在飞行器结构中普遍采用紧固件进行结构连接,紧固件的柔度系数是分析紧固件连接细节部位疲劳强度的重要参数.通常,确定紧固件柔度系数的方法多基于试验,但是这需要做大量的试验,耗费巨大.因此希望通过理论方法对紧固件柔度系数进行研究,获得新的计算紧固件柔度系数的方法,以达到减少试验和节省时间的目的.运用材料力学和弹性理论知识,推...     

焊接方法对5A06铝合金厚板焊缝接头性能的影响

分别采用搅拌摩擦焊(FSW)和熔化极氩弧焊(MIG)对20mm厚的5A06铝合金进行了焊接试验,对两种焊接方式的焊缝接头进行了机械性能测试、显微组织的观察以及表面残余应力的检测。结果表明,搅拌摩擦焊缝接头的抗拉强度比熔化极氩弧焊缝接头的高,搅拌摩擦焊缝接头往往断裂于前进侧的熔合过渡区,熔化极氩弧焊缝接头断裂于热影响区;相比熔化极氩弧焊,搅拌摩擦焊接头晶粒明显细化,焊缝中Mg、Mn等合金元素烧损明显减少,焊缝表面的残余应力水平也较低。     

一种用于反辐射导弹的被动红外导引头方案设想

文章介绍了一种用于复合制导反辐射导弹的被动红外导引头的方案设想。以关制某型防空量弹系警的探测雷达作为设想打击目标，结合目标特性对红外导引头相关技术指标进行了分析，介绍了导引头的总体方案。