弹性飞行器动态耦合和控制综合研究

研究弹性飞行器的动态耦合问题，首先导出了非定常气动力作用下的弹性飞行器的纵向运动方程。就简化的非定常气动力数学模型提出了分析气动弹性飞行器稳定性的影响方法，而后对弹性飞行器的动态耦合特性提出了定性的分析方法。并从有效抑制飞行器的弹性振动角度，研究了主动反馈控制、操纵面及陀螺位置的合适选择的协同设计问题。     

三元二次样条函数及其计算（Ⅱ）——计算机表示

关于高维数据拟合提出两种计算方法，用各种实例在计算机上计算，给出了等值面图形绘制方法，直观地表示高维空间曲面。应用实例表明，有杉本方法进行四维数据插春效果令人满意，铁于微机实现，等值面绘制快速精确。     

Reliability design optimization of composite structures based on PSO together with FEA

The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization (PSO) and finite element analysis (FEA) has been proposed. Numerical examples for the reliability design optimization (RDO) of a laminate and a composite cylindrical shell are worked out to demonstrate the effectiveness of the method. Then a design for composite pressure vessels is studied. The advantages and necessity of RDO over the conventional equi-strength design are addressed. Examples show that the proposed method has good stability and is efficient in dealing with the probabilistic optimal design of composite structures. It may serve as an effective tool to optimize other complicated structures with uncertainties.     

An approach for parameter estimation of combined CPPM and LFM radar signal

In this paper, the problem of parameter estimation of the combined radar signal adopting chaotic pulse position modulation (CPPM) and linear frequency modulation (LFM), which can be widely used in electronic countermeasures, is addressed. An approach is proposed to estimate the initial frequency and chirp rate of the combined signal by exploiting the second-order cyclostationarity of the intra-pulse signal. In addition, under the condition of the equal pulse width, the pulse repetition interval (PRI) of the combined signal is predicted using the low-order Volterra adaptive filter. Simulations demonstrate that the proposed cyclic autocorrelation Hough transform (CHT) algorithm is theoretically tolerant to additive white Gaussian noise. When the value of signal noise to ratio (SNR) is less than 4 dB, it can still estimate the intra-pulse parameters well. When SNR = 3 dB, a good prediction of the PRI sequence can be achieved by the Volterra adaptive filter algorithm, even only 100 training samples.     

Research on uncertainty in measurement assisted alignment in aircraft assembly

Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations（P＆O）of aligned components are critical characters which assure geometrical positions and relationships of those components.Therefore,evaluating the P＆O of a component is considered necessary and critical for ensuring accuracy in aircraft assembly.Uncertainty of position and orientation（U-P＆O）,as a part of the evaluating result of P＆O,needs to be given for ensuring the integrity and credibility of the result;furthermore,U-P＆O is necessary for error tracing and quality evaluating of measurement assisted aircraft assembly.However,current research mainly focuses on the process integration of measurement with assembly,and usually ignores the uncertainty of measured result and its influence on quality evaluation.This paper focuses on the expression,analysis,and application of U-P＆O in measurement assisted alignment.The geometrical and algebraical connotations of U-P＆O are presented.Then,an analytical algorithm for evaluating the multi-dimensional U-P＆O is given,and the effect factors and characteristics of U-P＆O are discussed.Finally,U-P＆O is used to evaluate alignment in aircraft assembly for quality evaluating and improving.Cases are introduced with the methodology.     

Evaluation of COMPASS ionospheric model in GNSS positioning

As important products of GNSS navigation message, ionospheric delay model parameters are broadcasted for single-frequency users to improve their positioning accuracy. GPS provides daily Klobuchar ionospheric model parameters based on geomagnetic reference frame, while the regional satellite navigation system of China’s COMPASS broadcasts an eight-parameter ionospheric model, COMPASS Ionospheric Model(CIM), which was generated by processing data from continuous monitoring stations, with updating the parameters every 2 h. To evaluate its performance, CIM predictions are compared to ionospheric delay measurements, along with GPS positioning accuracy comparisons. Real observed data analysis indicates that CIM provides higher correction precision in middle-latitude regions, but relatively lower correction precision for low-latitude regions where the ionosphere has much higher variability. CIM errors for some users show a common bias for in-coming COMPASS signals from different satellites, and hence ionospheric model errors are somehow translated into the receivers’ clock error estimation. In addition, the CIM from the China regional monitoring network are further evaluated for global ionospheric corrections. Results show that in the Northern Hemisphere areas including Asia, Europe and North America, the three-dimensional positioning accuracy using the CIM for ionospheric delay corrections is improved by 7.8%–35.3% when compared to GPS single-frequency positioning ionospheric delay corrections using the Klobuchar model. However, the positioning accuracy in the Southern Hemisphere is degraded due apparently to the lack of monitoring stations there.     

Explicit expression of collision probability in terms of RSW and NTW components of relative position

The existing analytical and numerical computing methods for collision probability (P_c) provide sufficiently accurate results, but do not reveal the direct connection between P_c and conjunction geometry or error covariance. This paper derived an explicit expression of P_c under the circular orbit assumption, based on analysis of closest approach distance and Chan’s analytical formulae for P_c. The P_c was expressed as an explicit function of the radial, in-track, cross-track components of relative position and error covariance. The explicit expression is simple and compact, relates P_c with components of relative position, which are two kinds of important conjunction risk criteria. By introducing non-zero flight-path angle and ratio of velocity’s magnitude, a modified expression of P_c was presented for objects in eccentric orbits. For objects with eccentricity less than 0.01 (which account for 62% of all LEO objects), the relative error of the explicit expression is less than 0.107, or 0.252 for typical conjunction cases. What really matters in conjunction risk assessment is the order of magnitude rather than the specific value of P_c, the precision of the explicit expression is sufficient for conjunction risk assessment and decision-making for most LEO objects.     

AZ31镁合金搅拌摩擦焊工艺研究

采用带螺纹的搅拌头对10mm厚的镁合金在不同的工艺参数下进行搅拌摩擦焊,并观察了焊缝的表面形貌和显微组织,结果表明:当n/v比在一定的合适范围内时,才能获得焊缝成形优良的接头;焊核区的金属在搅拌头摩擦热和旋转搅拌的作用下发生塑性变形,并产生细小等轴状的动态再结晶晶粒,晶粒大小约为4.5μm,β-Mg17All2经过搅摩擦焊后弥散分布;前进侧和返回侧的金属均沿着焊核边缘向上迁移,前进侧焊缝过渡区域金属流变剧烈,而返回侧过渡区域的金属流变较缓和,存在一个渐变的过渡区域。     

基于模板识别的高精度自动定位系统

为满足机器人辅助 医疗手术中高精度自动识别物体的需要,利用Bumblebee 2 摄像头拍摄图像,把黑白交互的椭圆和圆作为一个模板,用改进的角点提取方法提取出图像中的角点;在对图像进行增强之后,利用模板黑白格的几何对称性特征提取模板中的角点,然后区分出椭圆中的角点和圆中的角点,最后利用向量垂直关系提取出椭圆中的目标角点,识别出模板.通过Bumblebee 2自带的深度函数,提取模板的深度,得到模板在摄像头空间中的坐标,达到高精度自动定位物体的目的,克服传统摄像机需要标定内外参数的步骤.实验表明,定位误差在0.42 mm之内,基本上可以满足手术的要求.     

基于吊具吊点调节的航天器水平调节方法

水平调节是航天器吊装过程中质量控制和安全保障的重要环节。文章针对航天器吊装时不同状态的特点,提出了一种以传感器倾角为输入、吊点位置为输出的水平调节航天器的方法,并通过理论分析给出调节算法,最后通过软件仿真验证了新方法的有效性。