GH4169高温合金惯性摩擦焊接头动态再结晶过程

当温度、应变、应变速率达到一定条件时 ,GH4 16 9镍基高温合金在惯性摩擦焊接过程中易发生动态再结晶。本文研究结果表明 ,由于GH4 16 9合金惯性摩擦焊接时间很短 ,动态再结晶进行得相当充分 ,而动态回复不足 ,在动态再结晶的过程中还可以看到有些结晶过程还处于形核阶段 ,这是惯性摩擦焊接头产生细晶乃至超细晶的根本原因     

一种整体式天然气压缩机气阀故障诊断技术研究CSCD

整体式天然气压缩机在石油化工领域广泛应用,压缩机的正常工作对安全生产具有重要意义。为了有效诊断整体式压缩机气阀部件的故障,采用了Daubechies小波基函数对ZTY470型整体式天然气压缩机气阀振动信号的分解重构原理,详细介绍了以振动信号的能量为故障特征的故障诊断过程。对气阀阀片断裂和弹簧断裂的故障振动信号进行了小波包分析,并与正常工作时的信号进行了对比。实验表明该方法能准确的进行故障诊断和故障定位,证明了对整体式天然气压缩机气阀故障诊断的有效性。     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

电子接插件在线质量检测研究

近年来,电子信息产业的迅猛发展,作为配套支持的接插件的生产规模也不断扩大。由于电子设备厂商对接插件的质量要求越来越高,接插件的检测也得到了越来越多的重视。由于检测速度快、运行稳定可靠的特点,机器视觉检测技术被广泛用于对接插件外观质量的在线检测。本文应用机器视觉检测技术对电子接插件质量进行了在线检测研究,并以其典型的冲压质量缺陷的检测为例对机器视觉在线检测系统的构成、核心处理模块、应用中存在的问题以及解决问题的新方法进行阐述,最后针对系统的可靠性进行了分析。     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

卷簧式浅层月壤取样器设计及动力学分析

面向浅层月壤取样,文章设计了新颖的卷簧式可伸缩小型月壤取样器,它包括柔性取样臂和振动式取样头。对取样器进行了动力学有限元分析,研究了取样臂为不同长度时取样头的振动模态及频率响应,得出取样臂一阶横振频率与取样臂长度呈负幂函数关系;对取样器测控系统进行了振动试验,通过扫频方式测量取样臂为不同长度时的自振频率,给出了取样臂长...     

基于层次评估理论的弹道导弹末段突防制导律研究

针对弹道导弹末段突防问题,应用层次性能评估体系,对弹道导弹末段典型突防制导律进行对比分析.并通过对弹道导弹制导精度、弹道导弹最大过载、弹道飞行时间和反导导弹脱靶量以及它们的均值、均方差的重要性和需求性分析,合理设置评估体系的指标及其权值,应用随机仿真分析方法,对比仿真经典比例导引、修正比例导引和变结构比例导引三种突防制导律的性能.仿真结果证明,层次评估理论可以用于弹道导弹末段突防制导律的评估及优选.     

基于磁共振线宽的Xe核自旋横向弛豫时间测量方法

随着核磁共振陀螺技术的发展,高精度核磁共振陀螺对原子气室性能提出了更高要求.原子气室内Xe核自旋的横向弛豫时间(T2)是衡量原子气室性能的重要参数之一,T2的常用测量方法为自由感应衰减法(Free Induction Decay,FID).当T2较短时,由于自旋进动信号易受外界干扰,FID方法难以对T2进行精确测量.根据磁共振线宽理论以及自旋进动信号检测技术,针对T2较短的原子气室,提出了基于磁共振线宽的Xe核自旋横向弛豫时间测量方法,构建了测试装置,对Xe核自旋进行了测试.测试结果表明,该测量方法能够有效获得Xe核自旋的横向弛豫时间,克服了FID方法对T2较短的原子气室难以测量的局限性,为检验核磁共振陀螺中原子气室的性能提供了有效测试手段.