旋流器内流场的研究

叙述了分别采用五孔探针、热线和激光三种流场测量方法测量旋流器模型内的流场分布情况,并得出基本一致的实验结果,从而为旋流发生器的设计提供理论依据。     

电子束表面造型对液冷冷板散热性能影响研究

为了获得电子束表面造型对液冷冷板散热性能的影响规律,对带有柱状表面造型的液冷冷板进行数值模拟。结果表明,当冷却液通道中存在柱状表面造型时,可有效提高冷板的散热性能,其中造型高度对冷板的散热性能影响最大,造型流向间距的影响其次,造型直径的影响最小;当柱状造型直径1mm、高度6mm且相邻造型的流向间距为4mm时,冷却液与模拟发热芯片的温差为46.08℃,该冷板的散热性能与空白试样对比可提升23.23%。之后根据模拟结果,制备了具有不同表面造型特征的液冷冷板试样,散热性能测试结果表明,通道内制备柱状造型可提高冷板散热性能达13%以上;但当柱状造型高度4mm,且造型数量较少时,改变柱状造型特征对提升冷板散热性能的影响较小。     

一种整体式天然气压缩机气阀故障诊断技术研究CSCD

整体式天然气压缩机在石油化工领域广泛应用,压缩机的正常工作对安全生产具有重要意义。为了有效诊断整体式压缩机气阀部件的故障,采用了Daubechies小波基函数对ZTY470型整体式天然气压缩机气阀振动信号的分解重构原理,详细介绍了以振动信号的能量为故障特征的故障诊断过程。对气阀阀片断裂和弹簧断裂的故障振动信号进行了小波包分析,并与正常工作时的信号进行了对比。实验表明该方法能准确的进行故障诊断和故障定位,证明了对整体式天然气压缩机气阀故障诊断的有效性。     

Mo M-PO/SBR Algorithm Based on Collaborative Platform and Mixed Model

For electromagnetic scattering of 3-D complex electrically large conducting targets,a new hybrid algorithm,Mo M-PO/SBR algorithm,is presented to realize the interaction of information between method of moment(Mo M)and physical optics(PO)/shooting and bouncing ray(SBR). In the algorithm,the COC file that based on the Huygens equivalent principle is introduced,and the conversion interface between the equivalent surface and the target is established. And then,the multi-task flow model presented in this paper is adopted to conduct CPU/graphics processing unit(GPU)tests of the algorithm under three modes,i.e.,MPI/Open MP,MPI/compute unified device architecture(CUDA) and multi-task programming model(MTPM). Numerical results are presented and compared with reference solutions in order to illustrate the accuracy and the efficiency of the proposed algorithm.     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

HTPB官能度数学模型建立

为了研究自由基型液体端羟基聚丁二烯预聚物(HTPB)体系官能度分布情况,对其化学合成中自由电子转移情况进行了分析,并通过数学统计的方法对其官能度分布进行理论数值模拟,建立了适用于自由基型HTPB官能度分布的函数关系式,并与GPC所测结果进行对比。结果显示,计算所得函数关系式与测试数据吻合结果较好,数值模拟结果准确性较高;自由基聚合生产的不同批次的HTPB官能度分布存在较大差异,单官能度分子含量可从5%~24%,二官能度分子的含量可从50%~81%;利用数学统计得到的函数关系,可将复杂的HTPB官能度测试转变为简单的分子量分布测试。     

涡轮流量计前导流件有限元计算分析

对涡轮流量计关键部件之一前导流件运用NX THERMAL/FLOW进行有限元计算分析,得出流量分离导致的大涡旋尾迹区易出现在前导流件尾部区域、前导流件叶片形状对此处流体速度变化具有较大影响的结论,为涡轮流量计和前导流件的设计提供了理论依据。     

助推-滑行式燃料最优真空飞行轨迹的设计方法

建立了飞行器助推-滑行式燃料最优真空飞行轨迹的最优控制模型,给出了一种更为简单、直观的内点约束条件和横截条件的推导方法,讨论了高效且更为稳定的数值计算方法,提出了两种应用模式,通过与连续推力式和脉冲式飞行方案的比较,说明这种设计方法在节省燃料方面具有优势.