Performance analysis of linearly combined order statistic CFARdetectors

Linearly combined order statistic (LCOS) constant false-alarm rate (CFAR) detectors are examined for efficient and robust threshold estimation applied to exponentially distributed background observations for improved detection. Two optimization philosophies have been employed to determine the weighting coefficients of the order statistics. The first method optimizes the coefficients to obtain efficient estimates of clutter referred to the censored maximum likelihood (CML) and best linear unbiased (BLU) CFAR detectors. The second optimization involves maximizing the probability of detection under Swerling II targets and is referred to as the most powerful linear (MPL) CFAR detector. The BLU-CFAR detector assumes no knowledge of the target distribution in contrast to the MPL-CFAR detector which requires partial knowledge of the target distribution. The design of these CFAR detectors and the probability of detection performance are mathematically analyzed for background observations having homogeneous and heterogeneous distributions wherein the trade-offs between robustness and detection performance are illustrated     

Optimised radiative cooling of infrared space telescopes and applications to possible missions

General principles are outlined for the design of space infrared telescopes intended to cool by radiation to the lowest temperatures attainable without the use of on-board cryogens, and assuming on-orbit cooling after a warm launch. Maximum protection from solar and earth heating, maximum radiating area and efficiency and minimum absorbing area and absorptivity are the obvious basic criteria. The optimised design is a short, fat telescope surrounded by a series of radiation shields, each cooled by its own radiator. Maximising the longitudinal conductivity of the radiation shields and of the telescope tube itself is important both to the on-orbit cooling time and the final achieveable temperature. Realistic designs take between 80 and 200 days to cool to within a few degrees of equilibrium temperatures, depending on the materials used. Great advantages accrue from the use of an orbit distant from earth. Both simple models and detailed simulations suggest that temperatures of 30 to 40 K are attainable in high earth orbits. Placing a radiatively cooled telescope in a halo orbit around the Lagrangian point L2 is a particularly attractive option and significantly lower temperatures can be achieved there than in Earth orbit. Optimised radiative cooling is an important element of the small Japanese mission SMIRT. We suggest that a combination of an ESA Medium-sized Mission with a NASA Explorer to send a 2m+ telescope to an L2 halo orbit would provide a cost-effective and powerful long-duration facility for the early 21st century.     

A 10 kW DC-DC converter using IGBTs with active snubbers

This full bridge DC-DC converter employs zero voltage switching (ZVS) on one leg and zero current switching (ZCS) on the other. This technique produces exceptionally low insulated-gate bipolar transistor (IGBT) switching losses through the use of an active snubber that recycles energy back to the source. Experimental results are presented for a 10-kW, 20-kHz converter     

Current distribution control for parallel connected converters. II

For pt.I, see ibid., vol.28, no.3, p.829-840 (1992). In the central-limit control (CLC), the multiloop controls are employed to regulate the output voltage and track the central weighted current, thus equalizing the output current of each converter module (CM). The current distribution error (CDE) between the output current of each CM is used as a criterion in judging system performance. The prediction and simulation results of this control scheme are illustrated. When incorporated with the maximum current limit, the proposed control method can determine the number of required converters in the active state for each load condition. As a result, the efficiency of a system can be increased significantly. A comparison between the performances of the system under master-slave control (MSC) and CLC is given     

The plasma Environment of Mars

Space Science Reviews -     

Radar: The Cassini Titan Radar Mapper

The Cassini RADAR instrument is a multimode 13.8 GHz multiple-beam sensor that can operate as a synthetic-aperture radar (SAR) imager, altimeter, scatterometer, and radiometer. The principal objective of the RADAR is to map the surface of Titan. This will be done in the imaging, scatterometer, and radiometer modes. The RADAR altimeter data will provide information on relative elevations in selected areas. Surfaces of the Saturn’s icy satellites will be explored utilizing the RADAR radiometer and scatterometer modes. Saturn’s atmosphere and rings will be probed in the radiometer mode only. The instrument is a joint development by JPL/NASA and ASI. The RADAR design features significant autonomy and data compression capabilities. It is expected that the instrument will detect surfaces with backscatter coefficient as low as −40 dB.RADAR Team LeaderThis revised version was published online in July 2005 with a corrected cover date.     

Visual analysis in a deployable antenna experiment [satellite antenna]

To establish a large deployable antenna, monitoring and collimation are essential for reliable and precise deployment. We have developed an analysis method to detect shifts in several images, in which the combination of cross-correlations between images and approximations at subpixel precision enables us to detect shifts in images with a precision of up to 0.01 pixels. The LDREX mission; which was a preliminary experiment for a large deployable antenna, ETS-VIII, was performed in December 2000. During this experiment, anomalies occurred in the antenna, and deployment was aborted. To understand the cause of the anomalies, we used our visual analysis method. Using this analysis, we detected vibrating features in the antenna, which were useful for explaining the anomalies. We outline our visual analysis method and discuss its application in monitoring the deployable antenna.     

Switched Ethernet testing for avionics applications

Switched Ethernet is being implemented as an avionics communication architecture. A commercial standard (ARINC-664) and an aircraft vendor-specific implementation known as avionics full duplex switched Ethernet (AFDX) have been developed that defines the topology and use of switched Ethernet in an avionics application. In avionics applications, the movement of data between devices must take place in a deterministic fashion and must be delivered reliably. All aircraft flight hardware must be tested to be sure that it will communicate information properly in the switched Ethernet network. The airframe manufacture must test the integrated network to verify that all flight hardware is communicating properly. Testing and maintenance testing is required to perform data communication level testing of switched Ethernet architectures for avionics applications to insure that all communication is deterministic and reliable. This paper provides an overview of a switched Ethernet avionics network and identifies the testing challenges associated with a switched Ethernet avionics application. A practical implementation performing the required tests is discussed.     

In-orbit demonstration of rendezvous laser radar for unmanned autonomous rendezvous docking

The National Space Development Agency of Japan (NASDA) performed unmanned autonomous rendezvous docking (RVD) experiments using the Engineering Test Satellite VII (ETS-VII) in 1998 and 1999. In these experiments, a rendezvous laser radar (RVR) was used as the primary navigation sensor during the final approach phase (relative distances from 500 m to 2 m). The RVR functioned properly, and its characteristics, which are measurement accuracy, optical propagation, and acquisition/tracking, satisfied the requirements. The experimental results show that RVR is effective for autonomous rendezvous docking.     

Acceleration of solar cosmic rays and the fine spectral structure of type II radio bursts

On the basis of data, obtained by means of the ground-based solar service RSTN (Radio Solar Telescope Network) and the geostationary satellite system GOES, the relationship between the solar cosmic rays (SCR) intensity I _p with the proton energy E _p > 1 MeV and parameters of meter-decameter type II radio bursts in the frequency range of 25–180 MHz is studied. The process of proton acceleration by shock waves was characterized by the frequency drift velocity of radio bursts V _mII and the relative difference between radio emission frequencies at the first two harmonics b. It is shown that the coefficient of correlation between I _p and b increases with E _p growing from 0.40 to 0.70, while a similar coefficient between I _p and V _mII does not exceed 0.30. Indications in favor of the two-stage SCR acceleration model are obtained.