Experiments on aeronautical satellite communications using ETS-Vsatellite

The world's first aeronautical satellite communication experiments, conducted at L-band frequencies using a commercial aircraft, are described. An airborne antenna with electronically steerable beam and communication equipment was installed in a B-747F freighter flying over transoceanic flight routes. The satellite used in these experiments is the Engineering Test Satellite-Five (ETS-V). During the test period, various experiments, such as antenna pattern measurements, transmission performances, and voice quality evaluation were conducted. As the airborne antenna is the key component for the aeronautical satellite communication system, emphasis has been placed on antenna characteristics. Its performance is found to be closely related to the fading characteristics in low-elevation areas and to transmission error performance     

Gravitational unloading effects on muscle fiber size, phenotype and myonuclear number.

The effects of gravitational unloading with or without intact neural activity and/or tension development on myosin heavy chain (MHC) composition, cross-sectional area (CSA), number of myonuclei, and myonuclear domain (cytoplasmic volume per myonucleus ratio) in single fibers of both slow and fast muscles of rat hindlimbs are reviewed briefly. The atrophic response to unloading is generally graded as follows: slow extensors > fast extensors > fast flexors. Reduction of CSA is usually greater in the most predominant fiber type of that muscle. The percentage of fibers expressing fast MHC isoforms increases in unloaded slow but not fast muscles. Myonuclear number per mm of fiber length and myonuclear domain is decreased in the fibers of the unloaded predominantly slow soleus muscle, but not in the predominantly fast plantaris. Decreases in myonuclear number and domain, however, are observed in plantaris fibers when tenotomy, denervation, or both are combined with hindlimb unloading. All of these results are consistent with the view that a major factor for fiber atrophy is an inhibition or reduction of loading of the hindlimbs. These data also indicate that predominantly slow muscles are more responsive to unloading than predominantly fast muscles.     

Enzyme activities and membrane lipids in Artemia cysts after a long duration space flight

In the Free Flyer Biostack Experiment (L.D.E.F. mission) investigations have shown that biological objects in a resting state can survive more than 5.5 years of exposure to the space factors in particular microgravity and cosmic rays. We have measured enzyme activities involved in metabolic pathways of sugar and lipid degradation and determined phospholipid composition. Pyruvate kinase and glucose-6-phosphate dehydrogenase activities in space-exposed cysts were higher than in earth controls after 1 hour incubation. In controls, total phospholipids remained unchanged, on the contrary they increased significantly in space-exposed cysts. The rate of metabolism of various phospholipid components was unchanged in controls allowing the development while the level of most of them decreased in space-exposed cysts except for phosphatidylcholine. Enzyme activities (acetylhydrolase, phospholipase A₂ and lyso phospholipase) involved in phospholipid degradation increased; however, activities were much higher in space-exposed cysts. In conclusion, the long duration space flight resulted in an increase of the metabolic activity correlated with a faster development within the first 20 hours of post flight incubation.     

Nitrogen reduction under hydrothermal vent conditions: implications for the prebiotic synthesis of C-H-O-N compounds

Dinitrogen is reduced in dilute hydrogen sulfide (H2S) solutions to ammonium at 120 degrees C. Experiments with dissolved dinitrogen (partial pressure 50 bar) in a 12 x 10(-3) mol/L H2S(aq) solution yield approximately 10(-5) mol/L NH4+ within 2-7 days. These yields are consistent with the equilibrium NH4+ concentration for the N-S-H system under these conditions. The formation of ammonium is catalyzed by the presence of freshly precipitated iron monosulfide. These results indicate that dinitrogen can be reduced at moderate temperatures in hydrothermal vent systems. Abiotic nitrogen reduction could have taken place within primordial hydrothermal vents, supplying some ammonia for the synthesis of C-H-O-N compounds via abiotic processes. The yield of ammonia via dinitrogen reduction by hydrogen sulfide, however, is so low that it is doubtful this process could have produced enough ammonia to sustain prebiotic hydrothermal synthesis of C-H-O-N compounds in or around vent systems.     

A Canadian high-energy neutron spectrometry system for measurements in space

Bubble Technology Industries Inc. (BTI), with the support of the Canadian Space Agency, has finished the construction of the Canadian High-Energy Neutron Spectrometry System (CHENSS). This spectrometer is intended to measure the high energy neutron spectrum (approximately 1-100 MeV) encountered in spacecraft in low earth orbit. CHENSS is designed to fly aboard a US space shuttle and its scientific results should facilitate the prediction of neutron dose to astronauts in space from readings of different types of radiation dosimeters that are being used in various missions.     

Unloading law for a LEO spacecraft with two-gimbals solar array

The purpose of this paper is to present a modified cross-product unloading law that can be used to provide an open-loop compensation control design to counteract the predominant effects of the gravity gradient torque. The modified cross-product unloading law, is successfully applied to a three-axis stabilized, nadir-pointed LEO spacecraft with two-gimbals solar array. The variation of the two solar array orientations can significantly change the spacecraft's moment of inertia during the nominal operation mode, which can produce significant momentum accumulation in the roll–yaw body plane and cause large yaw pointing error. A rigorous study of momentum management performance capability has been conducted by using a high-fidelity performance simulation software that contains models of four environmental disturbance torque (gravity gradient, aerodynamic, solar, and magnetic). The simulation results show that the proposed momentum unloading control law has enabled a substantial reduction in the maximum accumulated roll momentum, which results in improving the pointing accuracy of the LEO spacecraft enormously.     

A new type of magnetic gimballed momentum wheel and its application to attitude control in space

A new type of magnetically suspended gimbal momentum wheel utilizing permanent magnets is described. The bearing was composed of four independent thrust actuators which control the rotor thrust position and gimbal angles cooperatively, so that the bearing comes to have a simple mechanism with high reliability and light weight. The high speed instability problem due to the internal damping was easily overcome by introducing anisotropic radial stiffness. A momentum flywheel with the 3-axis controlled magnetic bearing displays good performance for attitude control of satellite with biased momentum.     

Maximum likelihood track-before-detect with fluctuating targetamplitude

An important problem in target tracking is the detection and tracking of targets in very low signal-to-noise ratio (SNR) environments. In the past, several approaches have been used, including maximum likelihood. The major novelty of this work is the incorporation of a model for fluctuating target amplitude into the maximum likelihood approach for tracking of constant velocity targets. Coupled with a realistic sensor model, this allows the exploitation of signal correlation between resolution cells in the same frame, and also from one frame to the next. The fluctuating amplitude model is a first order model to reflect the inter-frame correlation. The amplitude estimates are obtained using a Kalman filter, from which the likelihood function is derived. A numerical maximization technique avoids problems previously encountered in “velocity filtering” approaches due to mismatch between assumed and actual target velocity, at the cost of additional computation. The Cramer-Rao lower bound (CRLB) is derived for a constant, known amplitude case. Estimation errors are close to this CRLB even when the amplitude is unknown. Results show track detection performance for unknown signal amplitude is nearly the same as that obtained when the correct signal model is used     

Optical methods for non-contact measurements of membranes

Structures for space applications very often suffer stringent mass constraints. Lightweight structures are developed for this purpose, through the use of deployable and/or inflatable beams, and thin-film membranes. Their inherent properties (low mass and small thickness) preclude the use of conventional measurement methods (accelerometers and displacement transducers for example) during on-ground testing. In this context, innovative non-contact measurement methods need to be investigated for these stretched membranes.The object of the present project is to review existing measurement systems capable of measuring characteristics of membrane space-structures such as: dot-projection videogrammetry (static measurements), stereo-correlation (dynamic and static measurements), fringe projection (wrinkles) and 3D laser scanning vibrometry (dynamic measurements).Therefore, minimum requirements were given for the study in order to have representative test articles covering a wide range of applications. We present test results obtained with the different methods on our test articles.