Performance analysis of an attitude control system for solar sails using sliding masses

This paper deals with the attitude control performance analysis of a square solar sail. Two sliding masses are moved inside and along mast lanyards for the control around the pitch and yaw axes. An optimal linear controller with a feedback and a feedforward part is used to control the attitude of the sail. Numerical simulations have been carried out to investigate the system’s ability of performing precise and near-time-optimal reorientation maneuvers as well as the controller’s sensitivity with respect to the sail parameters, as the center of pressure to the center of mass offset or the sail’s size. Our simulation results are finally shown and discussed.     

Surface elements and landing strategies for small bodies missions – Philae and beyond

The investigation of small bodies, comets and asteroids, can contribute substantially to our understanding of the formation and history of the Solar System. In-situ observations by Landers play a prominent role in this field.The Rosetta Lander – Philae – is currently on its way to comet 67P/Churyumov–Gerasimenko. It will land in November 2014 and perform numerous experiments with a suite of 10 scientific instruments.Philae has been designed to cope with a wide range of possible comet properties. The considerations taken during its development are relevant for future Lander missions to small bodies in the Solar System.In addition the paper provides a review of alternative concepts, studied or developed for various missions like Phobos, Hayabusa/Minerva or Géocroiseur/Leonard.Various missions to small bodies in the Solar System, including Landers, are currently studied (e.g., Marco Polo). The paper will address the mission options and compare applicable technologies with the solutions chosen for Philae.     

A small mission for in situ exploration of a primitive binary near-Earth asteroid

We present a concept for a challenging in situ science mission to a primitive, binary near-Earth asteroid. A sub-400-kg spacecraft would use solar electric propulsion to rendezvous with the C-class binary asteroid (175706) 1996 FG3. A campaign of remote observations of both worlds would be followed by landing on the ∼1 km diameter primary to perform in situ measurements. The total available payload mass would be around 34 kg, allowing a wide range of measurement objectives to be addressed. This mission arose during 2004 from the activities of the ad-hoc Small Bodies Group of the DLR-led Planetary Lander Initiative. Although the particular mission scenario proposed here was not studied further per se, the experience was carried over to subsequent European asteroid mission studies, including first LEONARD and now the Marco Polo near-Earth asteroid sample return proposal for ESA’s Cosmic Vision programme. This paper may thus be of interest as much for insight into the life cycle of mission proposals as for the concept itself.     

Strategies for in-orbit calibration of drag-free control systems

Drag-Free Satellites (DFS) are a class of scientific satellite missions designed for research on fundamental physics as well as geodesy. They consist, basically, of a small inner satellite (test mass) located in a cavity inside a larger satellite, the normal one. The Drag-Free Attitude Control System (DFACS) is the most complex technology on-board these satellites. This key technology allows the residual accelerations on experiments on board the satellites to be significantly reduced. In order to achieve this very low disturbance environment (for some missions <10⁻¹⁴ g) the drag-free control system has to be optimized. This optimization process is required because of uncertainties in system parameters that demand a robustness of the control system. This paper will present approaches for in-orbit calibration of drag-free control systems. The discussion includes modeling, with scale factors and cross couplings, possible excitation signals, comparison of different parameter identification/estimation methods as well as simulation results.     

Design and Performance of the ICON EUV Spectrograph

We present the design, implementation, and on-ground performance measurements of the Ionospheric Connection Explorer EUV spectrometer, ICON EUV, a wide field (\(17^{\circ}\times 12^{\circ}\)) extreme ultraviolet (EUV) imaging spectrograph designed to observe the lower ionosphere at tangent altitudes between 100 and 500 km. The primary targets of the spectrometer, which has a spectral range of 54–88 nm, are the Oii emission lines at 61.6 nm and 83.4 nm. Its design, using a single optical element, permits a $0\stackrel{{}^{°}}{.}26$ imaging resolution perpendicular to the spectral dispersion direction with a large (\(12^{\circ} \)) acceptance parallel to the dispersion direction while providing a slit-width dominated spectral resolution of \(R\sim25\) at 58.4 nm. Pre-flight calibration shows that the instrument has met all of the science performance requirements.     

Modelling the Attitude Noise of the Gaia Spacecraft. A Simplified Approach

A high-precision attitude determination and control of the forthcoming European Gaia satellite is an essential task for the success of the whole mission. The requirements for the spacecraft’s attitude require exceptional efforts in the simulation of the rotations of the satellite under the influence of continuous and randomly arising effects. This paper describes the structure of a physically-motivated noise model for simulating the attitude in a closed loop configuration. It deals with the analysis of the most important disturbing forces and torques acting on the Gaia spacecraft.     

Validation of numerical prediction of dynamic derivatives: The DLR-F12 and the Transcruiser test cases

The dynamic derivatives are widely used in linear aerodynamic models in order to determine the flying qualities of an aircraft: the ability to predict them reliably, quickly and sufficiently early in the design process is vital in order to avoid late and costly component redesigns. This paper describes experimental and computational research dealing with the determination of dynamic derivatives carried out within the FP6 European project SimSAC. Numerical and experimental results are compared for two aircraft configurations: a generic civil transport aircraft, wing-fuselage-tail configuration called the DLR-F12 and a generic Transonic CRuiser, which is a canard configuration. Static and dynamic wind tunnel tests have been carried out for both configurations and are briefly described within this paper. The data generated for both the DLR-F12 and TCR configurations include force and pressure coefficients obtained during small amplitude pitch, roll and yaw oscillations while the data for the TCR configuration also include large amplitude oscillations, in order to investigate the dynamic effects on nonlinear aerodynamic characteristics. In addition, dynamic derivatives have been determined for both configurations with a large panel of tools, from linear aerodynamic (Vortex Lattice Methods) to CFD. This work confirms that an increase in fidelity level enables the dynamic derivatives to be calculated more accurately. Linear aerodynamics tools are shown to give satisfactory results but are very sensitive to the geometry/mesh input data. Although all the quasi-steady CFD approaches give comparable results (robustness) for steady dynamic derivatives, they do not allow the prediction of unsteady components for the dynamic derivatives (angular derivatives with respect to time): this can be done with either a fully unsteady approach i.e. with a time-marching scheme or with frequency domain solvers, both of which provide comparable results for the DLR-F12 test case. As far as the canard configuration is concerned, strong limitations for the linear aerodynamic tools are observed. A key aspect of this work are the acceleration techniques developed for CFD methods, which allow the computational time to be dramatically reduced while providing comparable results.     

Prospects for a European space administration

This paper addresses legal issues relating to the relationship between ESA and the EU. At present, several policy options are being discussed on how the two international organisations might enhance their cooperation in order to allow Europe's space activities to become more efficient and more competitive. The political options can be classified into four models, each having its specific implications concerning institutional and substantive legal questions. It becomes equally apparent that any cooperation of the two organisations will have certain effects on the funding of space programmes. The paper outlines the various models against the background of the latest policy developments and gives an overview of the possible implications of the models.     

Laboratory Tests of the Equivalence Principle at the University of Washington

Equivalence principle tests are probes for new fundamental physics. We have conducted several laboratory experiments to test the equivalence principle with unprecedented precision and generality using a torsion balance placed on a continuously rotating turntable. We present preliminary results comparing the differential accelerations of Ti, Be, and Al towards local masses, the earth and the center of our galaxy.