Element and Isotopic Fractionation in Closed Magnetic Structures

Recent papers have suggested that the slow solar wind is a super-position of material which is released by reconnection from large coronal loops. This reconnection process is driven by large-scale motions of solar magnetic flux driven by the non-radial expansion of the solar wind from the differentially rotating photosphere into more rigidly rotating coronal holes. The elemental composition of the slow solar wind material is observed to be fractionated and more variable than the fast solar wind from coronal holes. Recently, it has also been reported that fractionation also occurs in 3He/4He. This may be interpreted in the frame-work of an existing model for fractionation on large coronal loops in which wave-particle interactions preferentially heat ions thereby modifying their scale-heights. This revised version was published online in June 2006 with corrections to the Cover Date.     

Influence of Simplifying a Geometrical Model of the Gas Turbine Engine Combustion Chamber on the Results of Numerical Modeling

We studied the geometric models of combustion chambers depending on their simplification. It is shown that the error in calculating the parameters does not exceed 8 % under the constraint of the geometrical model of the gas turbine engine (GTE) combustion chamber by an angular sector with a burner device.     

分布式数字相控阵通道一致性校准方法

基于分布式数字相控阵通道一致性校准需求,提出了一种新的有效解决方法。首先基于时域相干的时延估计算法纠正通道间时延差,而后利用基于最小二乘拟合的频域均衡算法实现通道间幅相一致性校准。利用MATLAB平台进行仿真分析,结果表明,利用此方法校正后,失配通道与参考通道在通带内的幅度差值在0.015d B内,相位差值在0.1°内,有效地实现了通道间一致性校准作用。该方法已成功应用于实际工程项目中。     

The Juno Radiation Monitoring (RM) Investigation

The Radiation Monitoring Investigation of the Juno Mission will actively retrieve and analyze the noise signatures from penetrating radiation in the images of Juno’s star cameras and science instruments at Jupiter. The investigation’s objective is to profile Jupiter’s \(>10\mbox{-MeV}\) electron environment in regions of the Jovian magnetosphere which today are still largely unexplored. This paper discusses the primary instruments on Juno which contribute to the investigation’s data suite, the measurements of camera noise from penetrating particles, spectral sensitivities and measurement ranges of the instruments, calibrations performed prior to Juno’s first science orbit, and how the measurements may be used to infer the external relativistic electron environment.     

电磁辅助激光熔化沉积的残余应力

针对激光熔化沉积内部残余应力较大的问题,对其产生的机理作了分析。基于电磁场的应用原理,提出电磁辅助激光熔化沉积以降低其残余应力的方法。利用ANSYS参数化编程语言APDL模拟了电磁辅助激光熔化沉积的过程,分析了成形件残余应力的变化规律,结果表明同步加载轴向电磁力能较好地消减成形件内部残余应力。采用X射线衍射结合电解腐蚀的方法进行深度方向的残余应力测量试验,试验结果验证了电磁辅助的有效性。     

Studying the change in characteristics of optical surfaces of a spacecraft

The change in the working characteristics of the optical element sample depending on the thickness of the contamination film applied to the sample has been estimated experimentally. As sources of contamination, the coatings of lens hoods were chosen, which are located in close proximity to the contamination- sensitive optical system of a spacecraft. A series of experiments for applying contamination films of different thickness to the sample of the optical element has been carried out. Based on preliminary estimations, the thickness of the contamination during the entire period of the active existence of the spacecraft will not exceed 3500 Å.     

具有气体动力和物理化学非均匀性的超声速物体绕流(英文)

本文研究的问题是超声速气流流过物体时产生的气体动力和物理化学非均匀性及其对物体空气动力特性的影响。就有关流动非均匀性对温度剖面和密度的效应作了详细探讨,还仔细描述了激波与热层相互干扰时以及在激光辐射脉冲的作用下先行激波生成的情况。值得指出的是超声速气流中加入激光辐射能可能改变流动结构,在局部能量释放区域后面呈现的较高和较低压力,有助于控制飞行中物体的运动。可采取某些措施以改进飞行品质。     

Verification of shielding effect by the water-filled materials for space radiation in the International Space Station using passive dosimeters

The dose reduction effects for space radiation by installation of water shielding material (“protective curtain”) of a stack board consisting of the hygienic wipes and towels have been experimentally evaluated in the International Space Station by using passive dosimeters. The averaged water thickness of the protective curtain was 6.3 g/cm². The passive dosimeters consisted of a combination of thermoluminescent detectors (TLDs) and plastic nuclear track detectors (PNTDs). Totally 12 passive dosimeter packages were installed in the Russian Service Module during late 2010. Half of the packages were located at the protective curtain surface and the other half were at the crew cabin wall behind or aside the protective curtain. The mean absorbed dose and dose equivalent rates are measured to be 327 μGy/day and 821 μSv/day for the unprotected packages and 224 μGy/day and 575 μSv/day for the protected packages, respectively. The observed dose reduction rate with protective curtain was found to be 37 ± 7% in dose equivalent, which was consistent with the calculation in the spherical water phantom by PHITS. The contributions due to low and high LET particles were found to be comparable in observed dose reduction rate. The protective curtain would be effective shielding material for not only trapped particles (several 10 MeV) but also for low energy galactic cosmic rays (several 100 MeV/n). The properly utilized protective curtain will effectively reduce the radiation dose for crew living in space station and prolong long-term mission in the future.     

A challenge to the highest balloon altitude

Development of a balloon to fly at higher altitudes is one of the most attractive challenges for scientific balloon technologies. After reaching the highest balloon altitude of 53.0 km using the 3.4 μm film in 2002, a thinner balloon film with a thickness of 2.8 μm was developed. A 5000 m³ balloon made with this film was launched successfully in 2004. However, three 60,000 m³ balloons with the same film launched in 2005, 2006, and 2007, failed during ascent. The mechanical properties of the 2.8 μm film were investigated intensively to look for degradation of the ultimate strength and its elongation as compared to the other thicker balloon films. The requirement of the balloon film was also studied using an empirical and a physical model assuming an axis-symmetrical balloon shape and the static pressure. It was found that the film was strong enough. A stress due to the dynamic pressure by the wind shear is considered as the possible reason for the unsuccessful flights. A 80,000 m³ balloon with cap films covering 9 m from the balloon top will be launch in 2011 to test the appropriateness of this reinforcement.