航天器自主交会对接的高精度目标定位方法

根据航天器自主式交会对接的实际应用背景和技术需求,针对交会对接过程中所要求的高精度、实时性和强抗扰的技术指标,在合作目标特性分析的基础上,将高斯曲面拟合与双线性插值相结合,提出了一种高精度的合作目标定位方法。首先根据目标图像的灰度分布进行双线性插值和高斯曲面拟合,在此过程中可同时利用目标原有像素和插值点的亚像素信息,使拟合曲面各幅值点的坐标精度达到亚像素级,以确定目标的中心位置。仿真图像和实拍图像的试验结果表明,此定位方法具有亚像素级的定位精度,其总体定位误差可达到1/20个像素左右,并能满足实时性要求,可以在航天器交会对接与空间遥操作等方面的应用中发挥重要作用。     

星敏感器光谱探测能力用地面模拟测试系统设计

为实现对星敏感器光谱探测能力的测试和标定, 研制了一套可模拟恒星光谱的地面标定系统, 要求其光谱模拟精度优于10%. 采用光谱分布可控、光强可调的模拟照明系统作为地面标定系统的核心器件来模拟恒星光谱变化, 设计高成像质量准直光学系统使模拟星图成平行光出射, 在光学系统出瞳处产生星图, 完成具有恒星光谱信息的高精度星图模拟. 进而利用Lighttools建立标定系统的光谱仿真模型, 仿真结果表明恒星光谱模拟精度优于10%.      

Satellite-observed biological variability in the equatorial Pacific during the 2009–2011 ENSO cycle

The event of 2009–2011 El Niño Southern Oscillation (ENSO) provides an opportunity to gain insight into the biological variability of the equatorial Pacific Ocean for an entire ENSO cycle with satellite and in situ observations. Even though El Niño and La Niña in general led to respectively weakened and enhanced chlorophyll-a concentration and net primary production (NPP) along the equatorial Pacific Ocean during the 2009–2011 ENSO cycle, biological responses were highly disparate along the equator and attributed to different driving mechanisms. In the eastern equatorial Pacific east of 150°E, the El Niño-La Niña biological change was in general small except for the transition period even though sea surface temperature (SST) showed over ∼5 °C drop from El Niño to La Niña. In the central-eastern (170°W–140°W) equatorial Pacific, moderate change of biological activity is attributed to the changes of thermocline driven by the eastward propagating equatorial Kelvin waves and changes of zonal currents and undercurrents. Highest biological response in this ENSO cycle was located in the central (170°E–170°W) and central-western (150°E–170°E) equatorial Pacific with quadruple chlorophyll-a concentration and over ∼400 mg C m⁻² d⁻¹ increase of NPP from El Niño in 2009 to La Niña in 2010. However, spatial pattern of ENSO biological variability as represented with NPP is not exactly the same as chlorophyll-a variability. Wind-driving mixing of nutrients and eastward advection of the oligotrophic warm pool waters are attributed to this significant biological variability in this region.     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

Chaboche随动硬化模型参数确定及棘轮效应

采用遗传算法确定不同Chaboche随动硬化模型的参数,得到的3种模型中,四分量模型对棘轮的预测与试验结果符合最好.增大应力幅值或应力平均值,都会使应变峰值增大,应变累积速度加快;利用确定的四分量模型研究加载顺序对棘轮的影响.结果表明,平均应力加载顺序对棘轮预测有较大影响,加载顺序高-低的累积应变低于加载顺序低-高的累积应变,而且先加载的平均应力越大,后加载的载荷产生的累积应变越小;而应力幅值加载顺序对应变累积几乎没有影响.     

基于模型的系统工程方法在载人航天任务中的应用探讨

针对基于文档的航天任务设计中设计数据分散、一致性差、跟踪难度大等问题,引入了基于模型的系统工程(MBSE)方法。首先,介绍了MBSE方法理念,即通过构建图形化的模型来支持系统的需求捕获、设计、分析、验证和确认等全生命周期活动。然后,给出了MBSE方法的一般工作流程,即先构建系统的需求模型,用于指导功能模型、物理架构模型等的构建,按照事先制定好的逻辑规则建立模型间的关系,依靠模型间的关系实现设计过程中的关联性分析、参数查询等工作。最后,应用MBSE方法于载人飞船交会对接任务中。结果表明,此方法改善了人员沟通,提高了设计效率,降低了设计风险,可为MBSE方法在航天任务设计中的进一步应用提供参考。     

被动型星载氢钟H型气体电离模型及参数优化

针对被动型星载氢钟气体电离装置低功耗、低电磁干扰的设计要求,设计了一种基于平面盘绕馈能天线的H型电离系统,并建立该电离方法的数学模型。首先,由Maxwell方程出发,推导出了电离泡中的电场和磁场的分布模型,得到气体电离机制;再由电磁场的分布方程推导出氢气击穿判据表达式,建立了气体电离条件的数学模型;最后,利用电离击穿条件判据方程优化了电离装置的设计参数。数值仿真与测试表明该模型是有效的,采用优化的设计参数可以使电离功耗和电磁干扰特性得到改善,且电离直流电源总功率可小于2W。     

富氢/富氧燃气同轴双剪切气-气喷嘴性能仿真分析

为研究富氢/富氧燃气同轴双剪切气-气喷嘴设计参数对燃烧性能和燃烧室热载的影响,采用正交试验设计方法对这些参数进行组合,数值模拟单喷嘴燃烧室流场,并以燃烧长度、燃烧室壁面和喷注面板处平均燃气温度为指标评价燃烧性能和热载.结果表明:燃氧速度比对燃烧性能和燃烧室热载影响最显著,中心氢流量比例对燃烧室热载影响非常显著,氧压降比对喷注面板处燃气平均温度的影响也很显著,而喷嘴出口壁厚对喷嘴性能影响不明显.燃氧速度比和氧压降比的交互作用对喷嘴性能有一定影响,而其他设计参数之间的交互作用对喷嘴性能影响非常小.最短燃烧室长度为117.9mm,最低壁面燃气温度及面板燃气温度分别为1637.7K和806.6K.      

一种新型火星定点着陆轨迹快速优化方法

针对火星定点着陆任务大气进入段的轨迹规划问题,给出了一种基于hp Radau伪谱法的快速优化算法。综合考虑大气进入段的动力学约束、边值约束、以及着陆器的机动能力约束和安全性约束,结合hp Radau伪谱法的配点特性,将轨迹优化问题转换成一个大规模多约束参数优化问题,给出了大气进入段轨迹优化问题的求解框架;为了提高算法的计算效率,给出了参数优化过程中雅克比矩阵的解析表达式;并通过数学仿真对本文算法进行了数值验证,结果表明：     

小步长低阶Collocation方法轨道积分性能研究

介绍了Collocation方法的原理及误差构成,以Collocation方法在逐历元滤波轨道解算中的应用为切入点对小步长低阶Collocation方法轨道积分的性能进行了研究。分别就二体问题及真实GPS星座卫星轨道为对象进行了一系列验算,得到了一些有益结论：就积分方法本身性能而言,Collocation积分方法较传统数值积分法精度要高且稳定性要好;在一定长度的积分步长范围内,将小步长低阶Collocation方法用于滤波轨道解算是可行且有效的。 但在积分步长很小的情形下,从计算效率方面考虑,不推荐使用Collocation方法;利用小步长低阶Collocation方法取代大步长高阶方法能提高效率且可抑制蚀现象引起的积分结果发散。经试验表明：选用积分步长为900s的4阶方法是合适的。