直流稳压电源瞬态响应的测量

分析了直流稳压电源瞬态响应的技术要求 ,提出了电源瞬态响应的测量方法 ,以及在实际测量中经常遇到的问题     

复合材料转动壳体动力特性分析

根据转动壳体的动力学方程,在利用DMAP对大型有限元软件MSC/NASTRAN二次开发的基础上,采用有限元方法对复合材料层合壳体转动状态下的动力特性进行了研究,分析了科氏力、离心力和横向剪力对固有频率的影响,并与实验结果进行了比较.结果显示由于科氏力的作用,即使在动坐标系下,层合壳体也会出现频率不等的前后行波,横向剪力使壳体的固有频率降低,且随着壳体厚径比的增加其影响显著增加.      

带QoP反馈的实时视频服务质量控制框架

分析了实时视频在现有"尽力而为"IP网络上传输所面临的带宽、延迟和丢失等问题,介绍了需要采用的拥塞控制和差错控制等应用级服务质量控制策略,并提出了一种联合的支持应用级服务质量控制的实时视频传输框架.该框架既考虑了网络资源的动态变化和影响,又兼顾了视频的服务质量调整对视频的表现质量的限制因素,充分利用了服务质量和表现质量之间的映射关系,具有更广泛的实用价值.      

空间等离子体导致高电压太阳阵的电流收集

给出一种能方便计算空间等离子体引起高电压太阳阵（HVSA）电流收集的理论统计模式，通过对物理过程分析认为空间等离子体致HVSA的功率损耗对HVASA的设计是不应忽视的。     

空间微重力条件下碲镉汞晶体的布里支曼生长

在中国返回式卫星上进行了一台双温区空间晶体生长炉的搭载试验，成功地实现了空间微重力条件下碲镉汞晶体的布里支曼生长，取得了一些有意义的结果。文章介绍了这种晶体炉的设计和空间试验的过程；分析了回收样品的主要测试结果；并对空间材料加工装置的设计和一些相关工艺问题进行了讨论     

二维非结构网格的生成及其Euler方程解

 采用推进阵面法生成三角形非结构网格,用多重网格技术求解泊桑方程以取得结构背景网格.提出了一种高效的边界剖分法,并用它来生成初始阵面.另外,还提出了一种新颖的数据结构——数组链接表,用它来存贮网格数据.用有限体积法在非结构网格中求解了二维可压缩Euler方程,给出了单段翼型和多段翼型的算例,并与实验结果进行了比较和分析.     

Response of Hainan GPS ionospheric scintillations to the different strong magnetic storm conditions

Using the GPS ionospheric scintillation data at Hainan station (19.5°N, 109.1°E) in the eastern Asia equatorial regions and relevant ionospheric and geomagnetic data from July 2003 to June 2005, we investigate the response of L-band ionospheric scintillation activity over this region to different strong magnetic storm conditions (Dst < −100 nT) during the descending phase of the solar cycle. These strong storms and corresponding scintillations mainly took place in winter and summer seasons. When the main phase developed rapidly and reached the maximum near 20–21 LT (LT = UT + 8) after sunset, scintillations might occur in the following recovery phase. When the main phase maximum occurred shortly after midnight near 01–02 LT, following the strong scintillations in the pre-midnight main phase, scintillations might also occur in the post-midnight recovery phase. When the main phase maximum took place after 03 LT to the early morning hours no any scintillation could be observed in the latter of the night. Moreover, when the main phase maximum occurred during the daytime hours, scintillations could also hardly be observed in the following nighttime recovery phase, which might last until the end of recovery phase. Occasionally, scintillations also took place in the initial phase of the storm. During those scintillations associated with the nighttime magnetic storms, the height of F layer base (h’F) was evidently increased. However, the increase of F layer base height does not always cause the occurrence of scintillations, which indicates the complex interaction of various disturbance processes in ionosphere and thermosphere systems during the storms.     

基于离散数据点的变壁厚叶身参数化设计

在原始截面离散数据点的基础上,给出了面向工程实际的中弧线几何造型方法和基于离散数据点的内形曲线参数化方法;深入分析了UG(Unigraphic)系统参数化造型的实质;给出了可行的参数化方案;结合面向对象的思想和创成式的建模方式,实现了变壁厚叶身参数化设计.该模块基于UG/OpenAPI接口,采用即时记录数据点和标记回溯点的方式,在交互中可以实时动态修改,达到"所见即所得"的效果,并在实际应用中得到有效验证.      

基于变马赫数的五孔探针三维插值方法

探讨了五孔探针气动数据的插值方法,为提高插值精度,开发了基于传统线性插值法的三维线性插值法。该方法把同一探针在不同马赫数下的校准图形成三维数据库,将实验数据通过三维图进行插值。并使用改进前后的两种插值方法分别对校准风洞测得的数据进行整理,对比结果证明:在实验工况连续变化的情况下,三维线性插值法在插值精度上要优于传统线性插值法。特别是在来流马赫数变化较大时,该方法可以改善单一校准文件处理造成的数据精度问题,可用于自动化流场采集系统,为流场高速高精度采集奠定基础。     

WAKE GEOMETRY CALCULATIONS FOR TILT-ROTOR USING VISCOUS VORTEX METHOD

A tilt-rotor unsteady flow analytical method has been developed based upon viscous vortex-particle meth- od. In this method, the vorticity field is divided into small assembled vortex particles. Vortex motion and diffusion are obtained by solving the velocity-vorticity-formed incompressible Navier-Stokes equations using a grid-free La- grangian simulation method. Generation of the newly vortex particles is calculated by using the Weissinger-L lifting surface model. Furthermore, in order to significantly improve computational efficiency, a fast multiple method （FMM） is introduced into the calculation of induced velocity and its gradient. Finally, the joint vertical experimen- tal （JVX） tilt-rotor is taken as numerical examples to analyze. The wake geometry and downwash are investigated for both hover and airplane modes. The proposed method for tilt-rotor flow analysis is verified by comparing its re- sults with those available measured data. Comparison indicates that the current method can accurately capture the complicated tilt-rotor wake variation and be suitable for aerodynamic interaction simulation in complex environ- ments. Additionally, the aerodynamic interactional characteristics of dual-rotor wake are discussed in different ro- tor distance. Results show that there are significant differences on interactional characteristics between hover mode and airplane mode.