高温超导X波段带通滤波器研制

本文选用 10× 15× 0 .4 4 m m3双抛 L a Al O3衬底上外延生长的优质双面钇系高温超导 (HTSC)薄膜的Yba2 Cu3O7(YBCO) ,设计并制作了结构紧凑的高温超导发夹线微波窄带滤波器。该滤波器工作温度在 90 K以下 ,77K时指标为 :中心频率 9.4 8GHz,3d B相对带宽 1.1% ,带内最小插损 0 .36 d B,带外抑制大于 4 5 d B。另外 ,本文还介绍了高温超导滤波器的精确设计方法 ,并对高温超导滤波器的功率容载、制作等问题进行了讨论 ,同时还研制了具有实用意义的全密封高温超导滤波器外壳 ,仅需液氮制冷即可进入工作状态 ,输入、输出采用 SMA密封接头。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

双功能陶瓷膜生物反应器处理污水的实验研究

针对目前膜生物反应器运行过程中膜易污染的问题，研制了一种新型的双功能陶瓷膜生物反应器．该生物反应器的主要特点是采用一种具有双重功能的陶瓷膜作为生物反应器的主要元件，陶瓷膜可以交替地进行曝气和过滤，将膜的在线反冲清洗和生物反应器的供氧曝气结合在一起．考察了不同运行条件下该反应器对COD、氨氮的去除效果．对陶瓷膜的充氧能力进行了实验，测得小孔陶瓷膜、大孔陶瓷膜、砂型曝气头的氧传递系数分别为：0．2315min-1，0．1587min-1，0．0991min-1．     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

基于三机冷备份的遥感器计算机系统冗余设计

文章对当前比较流行的计算机冗余模型进行了分析和比较,制定出了三机冷备份的冗余计算机结构,并对关键电路进行了设计。     

一种GPS定位信息可用性的实时判定方法

基于GPS接收机输出数据,采用3级AR模型来预测下一时刻的GPS输出值,并与实际的输出值相比较,以一定的检测门限,判断当前时刻定位信息的可用性。通过仿真证明该方法的有效性,为GPS的可用性判定提供了一种方法。     

分布式光纤测温系统及高速数据采集与处理

分布式光纤测温系统是一种用于实时测量空间温度场分布的光纤传感系统 ,在系统中 ,光纤本身既是传输媒体也是传感媒体。讨论了系统的工作原理、设计思想、系统构成、高速数据采集以及瞬态采样平均技术 ,该系统已应用于石油测井。     

充液挠性多体航天器的变结构控制

本文首先给出了充液中心刚体上铰接有多个挠性附件的开链多体系统的简化动力学方程，并以跟踪与数据中继卫星为例，用变结构控制方法设计了系统的控制器。控制任务是驱动单址天线使之精确地跟踪期望的运动规律，同时保持星体稳定，并且有效地抑制弹性附件的振动。数值算例证明了所设计控制规律的有效性。     

多飞行器测控技术的研究

提出了一种基于DBF和DMF-CDMA技术的多飞行器测控系统。首先描述了系统的工作原理，然后对DBF给出了全面和详细的计算机仿真，包括圆面阵DBF阵因子方向图仿真和DBF对多飞行器的搜索与跟踪仿真。最后对DMF-CDMA给出了实验结果。实验的硬软件巳达到实用水平。这些说明本文提出的多飞行器测控方案是可行的。