对称恒定电流激励动态应变测量技术的分析与应用研究

对称恒定电流激励技术是使用一对匹配的恒定电流源激励只有一个工作应变片的应变测量方法。这项技术提供了非常强的抑制静电噪声拾波干扰的能力,应用于只要求使用2线连接的动态应变测量或应变型传感器这种无抗干扰连接的方式。文章介绍了这种新型动态应变测量技术的特点,并与传统的使用惠斯顿电桥和单端恒定电流源激励的技术进行了比较。此技术还可以提供检测传感器健康状态和连接电缆状态的方法。     

高温不锈钢与钛合金微动疲劳特性的实验研究

用桥式试样研究了接触压力、微动幅度、温度、循环次数、高低周载荷幅值比等参数对微动疲劳寿命影响。结果表明拉应力和法向压力均影响微动疲劳寿命。当拉应力较大时,微动疲劳寿命（FFL）与普通疲劳寿命（PFL）相差不大,法向压力的影响不明显;拉应力较小时,FFL显着低于PFL,且法向影响显着。FFL随法向压力增加而降低,但当超过200MPa后,反而提高。高低周幅值比的增加,FFL大幅度降低。当幅值比为0.125,从室温到450℃,PFL持续降低。而FFL从室温到200℃降低幅度较大,在300℃左右恢复,随后又降低。研究表明FFL的恢复是微动表面形成了防护性釉质层的结果。     

平面波压力扰动下压气机逐级动态响应分析

应用轴流压缩系统的逐级动态响应模型对平面波型压力扰动下的多级压气机瞬态响应及气动稳定性进行了较详细的数值分析。对－ ８级跨声压气机的数值模拟结果表明, 基于流动阻塞机理建立的压缩系统稳定性判别准则是合理和可靠的。结果还进一步建立进口扰动频率与压气机瞬态响应间的关联关系     

超精密机床减振分析

良好的减振措施是提高机床,特别是超精密机床加工精度的重要技术之一.本文以亚微米超精密车床为研究对象,论述了该机床从结构到材料选取上的减振特点,并重点进行了空气弹簧和空气静压轴承主轴减振分析,由理论分析和实验表明:减振措施合理,减振效果良好.     

Research on High-Precision Measurement Systems of Modern Aircraft

High-precision measurement systems of modern aircraft are studied in this paper. A measurement system with correction in the structure of inertial navigation system is introduced for highprecision aircraft. In the correction algorithms, a linear error model of the navigation system is usually used. With the aim of increasing the accuracy of the navigation system, we propose a nonlinear correction algorithm based on the state dependent coefficient representation of the nonlinear model.     

毛里求斯之旅

不是我说苏州杭州不好,只不过发自肺腑的觉得说上有天堂下有苏杭的这位一定没去过毛里求斯,总的来说还是非常值得一去的,主要为的是她的海。在岛上请不要太纠结路途,不要太纠结语言,不要太纠结日晒,享受每一寸颠簸和灿     

Can an impulsive variation of the solar wind plasma pressure trigger a plasma bubble? A case study based on CSES,Swarm and THEMIS data

During the August 25, 2018 geomagnetic storm, the new borne CSES-01 satellite and the Swarm A satellite detected a really large equatorial plasma bubble (EPB) in the post-midnight sector over western Africa. We investigated the features of this deep ionospheric plasma depletion using data from the Langmuir probes on-board CSES-01 and Swarm A satellites, and data from the high-precision magnetometer and the electric field detector instruments on-board CSES-01. Using also plasma and magnetic field data from THEMIS-E satellite we found that, during the passage of the magnetic cloud that drove the geomagnetic storm, an impulsive variation lasting about ten minutes characterized the solar wind (SW) pressure. The analysis of the delay time, between the occurrence of such impulsive variation and the detection of the plasma bubble, suggests a possible link between the SW pressure impulsive variation as identified by THEMIS-E and the generation of the EPB as detected by CSES-01 and Swarm A. We put forward the hypothesis that the SW pressure impulsive variation might have triggered an eastward prompt penetrating electric field that propagated from high to equatorial latitudes, overlapping in the nightside region to the zonal westward electric field, causing either a reduction or an inversion, at the base of the EPB triggering.     

一种天线主面分瓣连接件的设计

设计了一种天线主面分瓣连接件,介绍了该装置的工作原理及工作过程,通过分析、比较,表明该装置动作明确、定位简单准确且夹紧可靠,是一种较好的设计.     

外加载荷对镀Pt 探针与ZnO纳米棒接触电学特性的影响

利用原子力显微镜研究了镀Pt探针与生长在银基底上的单根ZnO纳米棒接触的电学特性.实验测得的Ⅰ-Ⅴ特性曲线呈基本对称的非线性形状,表明镀Pt针尖与ZnO纳米棒顶端形成了良好的肖特基接触.同时,研究发现随着外加载荷的增加,针尖与样品间接触面积增大,使得反向截止电压和正向导通电压均有所升高,而理想因子降低.