基于尺度不变特征的眼底图像自动配准与拼接

针对眼底图像对比度低、光照不均匀、不同视场的图像间存在几何畸变等特点,提出了一种基于尺度不变特征的眼底图像自动配准与拼接算法.该算法分别提取同态滤波增强后的待配准眼底图像的尺度不变特征点,并用向量进行描述,确定相邻两图像特征点的匹配关系,在MLESAC算法中使用透视变换模型去除误匹配点对,计算匹配点对之间的变换矩阵,进行图像空间变换,完成配准和拼接.对实际眼底照相机获取的多幅图像配准与拼接结果表明,该算法具有很好的鲁棒性和稳健性,配准精度达到像素级,可以实现眼底图像的高精度自动配准与拼接.     

面向空域/时域/功能混合模式的目标分组方法

提出了面向空域/时域/功能混合模式的目标分组方法,其结果为任务规划提供了包含空域、时域、功能的目标群体特征.该方法采用标准化方法对属性数据分类和扩展,按照不同类型属性数据分别建立属性差异度,提高了目标分组特征属性的可扩展性,解决了传统属性差异度难以适用于时域及功能属性的问题;在此基础上,综合考虑协同任务对目标分组各项属性的定性/定量要求、阈值约束及重要程度要求,构造了目标综合差异度,解决了某些属性不能直接加权的问题.仿真结果表明该方法能够快速有效地实现满足任务复杂要求的目标分组.     

高速流非平行边界层稳定性研究

导出了可压缩流的抛物化稳定性方程（PSE）。针对高速流动,特别是超声速和高超声速流动的非平行边界层稳定性问题进行了研究。引入高效的边界层变换、全流场高精度的差分格式及预估校正迭代和推进求解法来求解PSE方程,使得PSE方法中至关重要的正规化条件得到了满足,确保了数值计算的稳定。采用高马赫数下对稳定性起支配作用的第二模式,研究了高速流边界层稳定性的演变和特征,分析了流动的非平行性、压缩性,以及壁面冷却等因素对流动稳定性的影响．所得结果与相关实验数据吻合较好。     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

压力对膜盒式端面密封平衡直径的影响

膜盒式端面密封在低温液体火箭发动机涡轮泵中有着广泛的应用,作为直接影响密封工作稳定性及涡轮泵工作可靠性的重要参数,端面比压、膜盒平衡直径等如何选取一直是密封设计的重要工作.以某型低温液体火箭发动机涡轮泵的膜盒式端面密封为研究对象,研究压缩量、工作压力对膜盒应力分布、平衡直径、载荷系数和端面比压的影响.应用有限元法建立了...     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

激光投影系统在飞行模拟器上的应用

视景系统是飞行模拟器的重要组成部分,对保证模拟训练效果起着至关重要的作用,而对于采用投影显示的视景系统来说,投影器的性能则在很大程度上决定了视景系统的性能.本文以AVIOR激光投影系统为例对激光投影系统进行了详细的介绍,并与传统的CRT、LCD、DLP投影器进行了比较,最后对激光投影系统的发展前景进行了分析.     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

《客舱服务技能》课程教学的改进与思考

《客舱服务技能》是空乘专业的一门专业必修课程。在课程改革中,如何改进《客舱服务技能》的教学效果是我们需要关注的重点。本文从目前该课程发展状况、师资、教材、实训条件、教学方法等方面对该课程的建设情况及存在的问题进行了分析与探讨。     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.