三角板角反射器在RCS定标测试中的应用

对三角 板角反射器的散射特性进行分析,提出了其在单站及收发分离单站RCS(Radar Cross Section)定标测试中的应用方案.三角板角反射器后向散射方向图的主瓣部分很宽且很平缓,并具有较强的方位稳定性,适用于较大RCS目标的单站定标测试.但在收发分离的单站RCS定标测试系统中,发射馈源与接收馈源间存在一个小双站角,这会使得三角板角反射器散射方向图的主瓣部分急剧下降,并呈现较强的纹波,从而无法利用其进行精确定标.而其散射方向图的某一旁瓣部分,在存在小双站角时的变化不大,且同样具有较强的方位稳定性,故可利用旁瓣峰值作为收发分离单站RCS测试中的定标参考点.     

氧化物涂层对航天器材料原子氧剥蚀的防护

采用磁控溅射方法在航天器常用材料聚酰亚胺(Kapton)表面沉积无机氧化物涂层(TiO₂和SiO₂),来提高材料的抗原子氧剥蚀性能.通过选择试验材料和参数,优化了沉积涂层的工艺,以克服容易产生裂纹的缺点.对材料进行了原子氧效应地面模拟试验,结果表明,在Kapton上沉积涂层后,质量损失下降了2个数量级.另外,有涂层的Kapton表面基本没有变化并且没有出现裂纹.其中,TiO₂由于热膨胀系数更接近Kapton,比SiO₂的防护效果更好.     

金属橡胶刚度阻尼模型理论分析

针对金属橡胶构件加工工艺特点,以金属丝螺旋卷为金属橡胶构件的微元体结构.根据金属丝螺旋卷之间不同的接触状态,以圆柱压缩螺旋弹簧理论为基础,基于材料力学和库仑摩擦模型,考虑摩擦力的影响,建立金属丝螺旋卷微元体结构的力学模型.通过对微元体接触状态和接触对数目的分析,从理论上解释了金属橡胶的非线性刚度及阻尼产生的机理.该模型从细观的金属丝螺旋卷微元体上描述了金属橡胶迟滞特性的物理本质,为预测和分析金属橡胶的刚度、阻尼特性和设计金属橡胶构件提供了有效的理论基础.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

电磁监测试验卫星矢量磁场探测方法

电磁监测试验卫星是中国第一颗近地轨道电磁场科学探测试验卫星, 探测空间背景磁场是其重要任务之一. 空间背景磁场探测需要在卫星平台上对空间矢量磁场进行长期稳定准确探测, 电磁监测试验卫星采用磁通门磁强计和基于CPT效应的绝对磁场校准装置(Coupled Dark State Magnetometer, CDSM)分别探测空间相对矢量磁场以及绝对标量磁场, 通过数据处理, 使最终的矢量磁场探测数据具有准确性. 这种数据处理方法在理想模型下拥有解析解, 实施过程中载荷的噪声、 准确度及稳定性影响模型的准确性, 会产生数据校准误差. 通过对在轨磁场探测的模拟确定了这种数据处理方法的性能, 验证了在载荷设计性能的基础上电磁监测试验卫星的磁场探测可以实现1 nT的准确度.      

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

石墨烯用于提高材料抗原子氧剥蚀性能

提出新型二维纳米材料石墨烯在航天器上的应用.首先采用超声空化法制备得到石墨烯,然后将其添加到环氧树脂中,采用共混法制成纳米复合材料.热失重分析显示材料的热稳定性能有所提高.在地面模拟设备中对环氧树脂和纳米复合材料进行了原子氧效应试验,并对试验前后材料的质量损失、表面形貌和表面成分等进行了分析,结果表明纳米复合材料相对于纯环氧树脂,其抗原子氧剥蚀性能有明显提高.      

基于改进卡尔曼滤波的电池SOC估算

以研究电动汽车动力电池管理系统为背景,以电池荷电状态估算为关键技术,介绍了荷电状态与其主要影响因素的非线性动态关系,建立了二阶RC等效电池模型.在此基础上,考虑了温度对电池内阻的影响,采用卡尔曼滤波算法、改进的安时计量法和开路电压法,结合基于温度的电池模型参数在线辨识,对电池荷电状态进行估算,通过MATLAB仿真,并与基于经验公式的卡尔曼滤波算法进行了对比,平均误差为2.46%,提高了估算精度,验证了算法的可行性和可靠性.      

基于过程质量数据的制造系统可靠性建模分析

针对传统制造系统可靠性评价不考虑加工过程产品质量数据,无法对制造系统可靠性进行及时准确的建模分析,提出了基于过程质量数据的制造系统可靠性建模分析方法.首先,在给出了包含制造产品质量的制造系统可靠性新内涵的基础上,分析了制造过程中关键质量特性检验数据和制造系统组件的退化故障数据等过程质量数据对制造系统可靠性建模的影响,从而明确建模需求.然后,首次提出了基于产品合格概率和制造系统组件退化失效率的制造系统可靠性分析模型.最后,通过某盖板的加工系统的可靠性建模分析验证了模型的有效性.结果表明该模型能够方便地利用制造阶段的质量数据更准确地估计出制造系统可靠性.     

基于驻留时间比的近地空间碎片环境建模

为分析近地空间碎片的分布规律,提出了一种以碎片在空间网格内驻留时间为基础的碎片环境统计建模方法.该方法利用多项式拟合和求根方法统计碎片在空间网格内的停留时间,获取模型基础数据,并据此采用多项式预测、插值和时间序列分析等技术,综合分析空间碎片的分布与演化规律.给出了一个基于双行根数(TLE,Two Line Elements)数据的建模实例,该实例通过了ORDEM2000模型的对比验证,并获得了一些更精细的近地空间碎片环境特征.所得建模方法和分析结论可为长期运行的近地航天器轨道设计、碰撞风险评估及防护等提供技术支撑.