卫星图像采集任务调度系统的设计与实现

随着卫星遥感技术的高速发展 ,卫星图像在众多领域有了广泛的应用。文章给出了一个卫星图像采集任务调度系统的总体结构及其功能 ,讨论了该系统实现过程中的卫星资源描述、卫星图像采集任务描述、调度引擎、卫星时间窗口的仿真计算、调度结果的可视化展现等关键技术 ,归纳了系统的特点 ,并总结了今后系统的研究方向     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

CBERS-1卫星CCD相机零级图像处理研究

CCD相机是CBERS - 1卫星上的主要有效载荷之一。利用其接收的可见光和近红外谱段的图像 ,可以在国民经济的各个生产部门 ,诸如国土资源调查、农业、林业、地矿、水利、环境、生态等方面得到广泛应用。但是由于探元和光学系统成像的物理机制和各种干扰等因素影响 ,地面接收到的数据必须经过处理才能应用。文章介绍的内容就是将这种图像数据经图像预处理 ,得到零级图像 ;经过相应的辐射校正 ,得到一级图像 ;经过几何校正 ,得到二级图像产品 ,提供给其它部门加以应用     

低频靶标法测量CCD相机调制传递函数的仿真

基于用高频靶标法测试调制传递函数(MTF)时不能准确地体现出CCD器件的平均采样的情况。该文探讨用低频靶标法测试MTF,介绍它的原理;通过数字仿真CCD的光学镜头的模糊和采样平均过程,分析不同频率靶标的MTF测试结果,并分析相位造成的影响。     

基于粒子滤波的被动多基站跟踪算法

针对被动多基站跟踪的实际应用，提出了基于粒子滤波的被动多基站跟踪方法。该方法首先利用两个基站的观测数据融合目标位置，并用第三个基站的观测数据对目标位置进行检验，消除了错误融合位置；然后，推导了被动多基站粒子滤波模型，并根据被动多基站跟踪的特点，提出了顺序重抽样方法，有效地解决了被动多基站跟踪中的高度非线性、非高斯的影响；最后，给出了算法的性能仿真比较。仿真结果表明提出的方法性能明显优于其他跟踪方法（如PMHT、IMM-PDA）。     

基层工作难点问题研究之三——浅谈职工的责任意识和纪律观念

职业道德和职业技能是从业人员需要具备的两个基本素质。由于行业性质不同,职业道德的侧重点又有所区别,但不论怎样演变,“职业责任”和“职业纪律”始终是贯穿在职业道德中的精髓。以保障飞行安全为己任的民航空管行业,特别应该注重对人员责任意识和纪律观念的培养。简单地讲,