Form-finding methods for deployable mesh reflector antennas

Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.     

大型客机后缘襟翼滑轨整流罩气动外形设计方法

大型客机后缘襟翼机构伸出机翼下表面会带来气动损失,必须设计相应整流罩。整流罩的外形尺寸对气动力影响较大,会直接影响飞机的气动特性。设计整流罩时应该遵循整流罩外形设计要求,使其引起的高速巡航阻力尽可能小。在查阅相关文献、对比研究大量整流罩图片、分析研究计算机辅助设计(CAD)中NURBS曲面曲线描述方法的基础上,建立了一套详细的大型客机后缘襟翼滑轨整流罩外形设计方法,该方法在满足整流罩包裹住机构、减小气动损失等基本要求的同时,缩短了整流罩设计周期。     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

带VSCMGs的航天器姿态稳定及功率补偿控制

基于变速控制力矩陀螺群动力学模型建立其复合控制方程和分系统解耦约束方程,用矩阵投影方法同步设计得到航天器姿态与能量一体控制复合操纵律,利用Lyapunov方法分析了转子轴向惯量误差对姿态控制分系统的影响.根据飞轮转子轴向惯量与功率输出之间的误差关系设计出功率控制补偿器.复合操纵律中的力矩和功率两解形式相同,约束方程使得姿态与能量控制两分系统解耦,便于进行考虑执行机构特性的闭环控制系统性能分析.考虑飞轮转子轴向惯量误差时,姿态控制分系统的输出耗散特性使其能够保持稳定,而功率控制分系统输出误差与转子轴向惯量误差成比例关系,经过补偿后功率输出能满足控制要求.     

基于小波变换的光纤周界定位系统

为提高基于双Mach-Zehnder干涉仪结构的光纤周界定位系统的定位精度,对信号频率范围及信噪比对系统定位精度的影响进行了理论分析和仿真研究.在此基础上,提出在选用光缆时需要兼顾对外界振动的敏感性和对外场复杂环境的适应性,以确保在长期可靠运行的前提下,扩展采集信号的频率范围;使用小波阈值降噪算法,提取振动信号的有效频率成分,滤除噪声,提高信噪比.最后进行了监测距离31 km的外场实验,验证了所选用光缆的优良性能和小波降噪算法的有效性.     

翼柱形药柱燃面退移过程的变量化设计方法

固体火箭发动机翼柱形药柱燃面拓扑结构复杂,现有燃面退移仿真算法存在耗费时间长、燃面面积计算不准确及算法通用性差等问题.针对以上问题,采用变量化约束草图驱动的设计方法,通过执行图形比例变换,缩小药柱尺寸规模,还研究了一种新的颜色标识燃面算法,避免燃面统计疏漏与重复,并提出了适合单组翼、大小翼、前后翼等多种翼柱形药柱燃面退...     

Lunar lander's three-dimensional translation and yaw rotation motion estimation during a descent phase using optical navigation

Optical navigation for a lunar lander consists of estimating a lander's 3-dimensional (3-D) relative dynamic motion with respect to a preselected landing site using a passive 2-dimensional (2-D) video image sequence. Lunar landing missions require a lander to perform an autonomous accurate landing with simple mechanical structure, easy operation and low cost. These requirements have motivated the need to develop an advanced navigation system. Existing navigation systems trade-off simplicity, accuracy and cost. High accuracy navigation systems typically imply complexity and high cost. In this paper, we consider a scenario where the descending phase starts from an initial altitude of 10 km with a time-of-descent of 100 s. The navigation camera is an off-the-shelf optical instrument used to take the video image sequence of the landing site during the landing phase. It is fed into the motion estimation algorithm to be processed. The continuous wavelet transform (CWT) is used to analyse each image frame of the input digital video image sequence. The output is a 2-D video image motion trajectory map, which represents the projection motion of the landing site. The 2-D video image motion is projected back to the 3-D lander's relative motion based on a geometric analysis. The outputs of this estimation algorithm are the 3-D attitude motion parameters of the lander at a time corresponding to an image being taken. The attitude determination and control system (ADCS) of the lander uses these data to perform the lander's attitude control task. In this article, we provide the motion modelling for a lunar lander during the descending phase. The projection of a 3-D planar to 2-D image plane is analysed which build the correspondence between the 3-D lander's motion and the 2-D image motion. This link provides the evidence for the geometry analysis. CWT is reviewed and CWT for video image sequence analysis is also introduced. Numerical simulation of the estimated 2-D video image sequence under the lander performing a 3-D translation and yaw rotation during the terminal descent are shown to verify the proposed concepts. The analysis of the results show that the proposed method achieves highly accurate 2-D video image motion estimation of less then 1% error with significant savings of cost, mass and volume. It leads to the accurate estimation of the lander's 3-D relative motion with respect to the landing site.     

滕霖精密和超精密加工技术专家

随着航空机载系统市场竞争的愈发激烈,航空机载技术的先进性愈发受到重视,您认为航空机载技术的发展趋势是怎样的?滕霖:随着新一代飞行器的发展,航空机载系统正朝着综合化、精密微型化、结构轻量化     

基于GJB 5000A二级的航天系统软件配置管理解决方案

军用软件研制能力成熟度模型(GJB 5000A-2008)作为一种标准只是提出了软件过程要达到一定成熟度能力的要求,给出了软件过程改进的阶梯式进化框架,但是并没有具体地告知该如何去做、怎么去做,这成为航天军工企业软件过程改进的一个难点。为解决航天系统软件配置管理工作中存在的问题,提出一种基于GJB 5000A标准的适于航天系统软件实施配置管理的解决方案。项目实践效果表明,与没有实施软件配置管理时相比,在规范管理、团队工作效率、知识库建立、软件安全性和可靠性等方面都有很大的提高。     

新形势下航修企业分层分类的成本控制和价格管理模式构建

通过对当前航空装备修理企业成本控制和价格管理中存在问题的深入分析,结合航空装备价格工作后续发展趋势,提出构建航修企业分层分类的成本控制和价格管理模式,并介绍了某航空修理工厂在成本控制和价格管理方面所做的尝试和探索。