退火温度对Al-Mg 合金拉伸性能和显微组织的影响

通过硬度、拉伸性能测试和金相组织观察,研究了不同退火温度对含和不合Sc的Al-Mg合金组织和性能的影响.结果表明:添加Sc明显提高了Al-Mg合金的强度,抑制了合金形变组织的再结晶,高温退火后1570合金中仍弥散分布的Al3( Sc,Zr)粒子质点造成其较高的再结晶温度及拉伸性能.     

一种地球紫外中心快速提取方法

针对地球紫外中心指向高精度提取问题,提出一种基于梯度统计的快速、低存储需求的紫外地平圆盘中心提取算法。首先,考虑到星载计算机与高内存消耗的滤波算法、实时导航需求的冲突,采用结合Sobel边缘算子与局部二值模式（LBP）算子的改进边缘快速提取方法,有效剔除背景噪声并准确提取地球紫外临边特征。然后对非完整临边边缘采用最小二乘拟合得到中心的精确位置。实验结果表明,该方法抗噪声,可实现亚像素级地球中心提取,并显著降低存储需求和计算时间开销。对于1046×746的图像,该算法需要的存储空间仅为1100kByte,运算时间在20ms内,满足自主导航的需求。     

颞骨蜂房气化程度对血管性耳鸣的影响

为了研究颞骨蜂房气化程度与血管性耳鸣之间的生物力学关系,本文基于典型的血管性耳鸣患者的数据进行了计算分析。首先,基于血管性耳鸣患者CT图像分别建立颞骨蜂房的基础气化和过度气化2种气化程度的三维几何模型。然后,将三维几何模型分别导入Hypermesh软件中并以四面体单元进行网格划分,生成可计算的三维有限元(FE)模型。再将三维有限元模型导入Virtual.Lab Acoustics软件中,加载相同速度边界条件,计算模型的声压幅值响应。最后,以前庭处检测的声压幅值作为计算结果。由2个模型生物力学数值模拟计算的结果,可以发现频率为250 Hz时经气化模型产生的声压幅值比基础模型的值低3.02 dB。经过气化模型产生的声压幅值小于基础模型,且在相同频率下2个模型间的声压幅值差异可被血管性耳鸣患者察觉。这一结论可以尝试为临床创新治疗血管性耳鸣提供新的理论依据。      

基于光谱分析技术的磨损故障监测

采用转盘电极式原子发射光谱分析技术,监测某型燃气轮机传动润滑系统磨损状况的发展变化趋势,及时诊断早期磨损故障.为确保光谱分析技术监测的准确性,着重研究了环境温度波动、标准曲线细化、样品黏度以及磨损颗粒尺寸等主要因素对测量结果的影响,并简要阐述了光谱分析技术的基本原理.经大量研究试验表明:光谱分析技术能够提前预报燃气轮机传动润滑系统可能发生的磨损故障,是油液状态监控的1种有效手段.     

Libration point orbits for lunar global positioning systems

With the development of lunar exploration, a lunar global positioning system (LGPS) is demanded for both on-ground and in-flight lunar exploration missions. The traditional configuration of constellation requires at least eighteen satellites to cover the whole lunar surface continuously. In this paper, the configurations of the libration point orbits (LPOs) constellations are investigated. By using the constellations on the Earth–Moon _L1$L_1$ and _L2$L_2$ LPOs, the basic functions of the LGPS can be realized by using eight to fourteen satellites. First, the LPO and the combinations of LPOs, which can be used in the constellations of the LGPS, are investigated. The criteria and procedures of the configuration design are introduced. Second, the configurations of LPOs constellations are investigated in the Earth–Moon circular-restricted three-body problem (CR3BP). The size of the LPOs and the distribution of the satellites on these LPOs are determined by using an exhaustive algorithm and a global optimization method, respectively. The key performance parameters of these constellations are computed. Third, the constellations with good performance in the CR3BP are redesigned in the more accurate Earth–Moon based Sun-perturbed bicircular four-body problem (B4BP). Moreover, in order to avoid the ground coverage problem caused by the perturbation of the Sun, some modifications are implemented, and the configuration of the no blind area LGPS in the B4BP is obtained.     

考虑应力松弛的涡扇发动机高压涡轮持久寿命可靠性

建立了考虑应力松弛的持久寿命可靠性分析方法及公式。采用3维接触有限元模型,获得涡轮盘叶弹塑性应力应变场,筛选了某高压涡轮的危险部位。对涡轮危险部位进行了考虑应力松弛影响的持久寿命可靠性分析。分析结果表明所建立的分析方法及公式具有足够高的精度。在涡轮部件持久寿命可靠性分析时采用考虑蠕变松弛的概率寿命分析方法是非常重要的。     

GA-BP神经网络在航空发动机状态监测中的应用研究

针对航空发动机状态监测问题,引入人工神经网络为发动机复杂非线性系统建立精确模型;选择以GA-BP贝叶斯算法作为神经网络训练算法,建立优化设计近似模型;以发动机排气温度的预测为例,构建了一个GA-BP神经网络对航空发动机状态进行预测。结果表明,GA-BP神经网络收敛速度快,泛化能力强,优于标准BP神经网络,因而为航空发动机状态监测提供了一种有效的方法。     

同应力多危险部位失效相关轮盘疲劳寿命可靠度分析方法

提出了考虑失效相关性的同应力多危险部位轮盘应变疲劳寿命可靠度分析方法.引入广义强度和广义应力建立轮盘应变疲劳寿命可靠性模型,采用H-L法计算轮盘单失效部位可靠度.针对发动机轮盘常存在同应力多危险部位的特点,当考虑多失效部位相关性时,采用HohenbichlerM积分法对轮盘疲劳寿命可靠度进行计算.最后通过某轮盘应变疲劳寿命分析说明该方法的有效性.探讨了轮盘失效功能函数相关系数和应变寿命模型中材料随机变量相关系数关系,以及轮盘失效功能函数相关系数和轮盘疲劳概率寿命规律.      

Lumped element modelling of synthetic jet actuators

In this paper, a lumped element model of synthetic jet actuator is presented and used to predict the temporal variation of the jet velocity. Unlike the previous model reported in the literature, in this model the mechanical movement of the diaphragm is decoupled from the fluid phenomenon in the actuator cavity to allow the modelling of fluid mechanics aspect of the actuator to be investigated and validated separately. Furthermore, the “minor losses” occurring at the orifice exit is included and linked to the jet exit velocity profile. The results from this model are validated using the existing experimental data and CFD simulations. It is found that this model is capable of predicting the temporal variation of synthetic jets both in phase and magnitude when the actuator is operating away from the Helmholtz resonance frequency. Although the model fails to predict the correct phase information at the Helmholtz resonance frequency, it can still produce the jet peak velocity that is in good agreement with the experimental data. The lumped element model presented in this paper can be used to provide a reliable prediction of the jet peak velocity needed in the initial design of synthetic jet actuators for practical applications.     

非稳态单喷口射流控制扩压器内边界层的分离流动

对扩压器内单喷口射流产生的流向涡控制扩压器内部边界层分离流动行为进行了研究。研究的对象是一个扩张角为10°的二维扩压器,扩压器进出口面积比为1∶4.7,入口高度为15 mm。采用数值计算方法研究了当射流出口速度为非稳态时对分离流动的影响。给出了不同时刻,不同截面上的旋涡涡量分布。结果表明,采用非稳态喷射流向涡方法可以在不改变主流流量特性的情况下,有效地减小分离流动区域。