大直径整体叶轮分步法电解加工工艺与试验

在对大直径整体叶轮的叶片特征和过去电解加工(ECM)方法比较分析的基础上提出了一种叶片分步加工的电解加工方法.首先确立了分步法的加工顺序,采用专用仿真软件对叶片的被加工区域进行划分,使前道工序加工后留下的区域满足后道工序的电解加工要求;在此基础上计算各工序的加工运动路径,并根据机床运动配置形式给出了叶片加工所需的四轴联动算法,通过软件自动生成数控加工自动编程;借助于CAD/CAE/CAM软件设计了一组加工阴极并进行了工艺试验.试验结果表明,通过合理的区域划分,叶盆、叶背和叶根的加工过程具有较好的稳定性,叶背、叶根的加工精度得到了较好的控制.该工艺方法可望较高精度地解决大直径整体叶轮叶片型面加工难题.     

地面等待策略中的时隙分配模型与算法研究

 机场拥塞是制约民航运输的瓶颈所在,地面等待策略(GHP)是解决机场拥塞的有效方法,其核心就是时隙分配问题。为适应我国空中交通持续发展需要,实现科学时隙分配的要求,对GHP已有的研究进行分析和归纳,重点论述了时隙分配的概念、属性、模型和算法,在此基础上总结了时隙分配的关键问题,即随机容量的影响、均衡模型的建立以及模型求解算法的研究。最后指出了时隙分配问题未来的研究方向。     

浅谈空间光学遥感器稳像技术

文章首先分析了影响像稳定的因素,然后对几种常见的稳像技术的工作原理及其优缺点进行了介绍,在论述当前稳像技术发展现状及未来发展趋势的基础上,讨论开展综合稳像技术研究的必要性。     

新型聚苯并噁嗪改性树脂的制备与性能

通过预聚反应制备了一种新型聚苯并噁嗪改性树脂.利用FTIR、GPC表征了改性树脂.利用旋转黏度计、DSC、DMA和TGA分别考察了树脂的流动性能、固化行为和改性树脂固化物的热性能.结果表明:制备的苯并噁嗪改性树脂在60～ 100℃,黏度小于500 mPa·s,恒温6h黏度不明显增大,具有良好的流动性能,适用于RTM成型工艺.改性树脂聚合温度较低,具有良好的固化工艺性.改性树脂固化物在氮气气氛下Td5在430℃以上,在900℃的残重高达73.71％,Ts为353.4℃,具有良好热性能.     

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.     

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

双模态超燃燃烧室性能准一维计算方法

为了快速准确地得到双模态超燃燃烧室性能,对已有准一维非稳态方法进行了研究,发现当燃烧室工作在亚燃模态时此方法不能正确预测预燃激波串的压力变化趋势。将预燃激波串模型耦合到准一维非稳态方法中,得到一种改进的准一维非稳态计算方法。通过四组不同算例验证表明,此方法能准确地预测双模态超燃燃烧室的压力变化趋势,同时也能准确地捕捉到压力峰值,具有较高的精度和较好的适用性。     

大型客机后缘襟翼滑轨整流罩气动外形设计方法

大型客机后缘襟翼机构伸出机翼下表面会带来气动损失,必须设计相应整流罩。整流罩的外形尺寸对气动力影响较大,会直接影响飞机的气动特性。设计整流罩时应该遵循整流罩外形设计要求,使其引起的高速巡航阻力尽可能小。在查阅相关文献、对比研究大量整流罩图片、分析研究计算机辅助设计(CAD)中NURBS曲面曲线描述方法的基础上,建立了一套详细的大型客机后缘襟翼滑轨整流罩外形设计方法,该方法在满足整流罩包裹住机构、减小气动损失等基本要求的同时,缩短了整流罩设计周期。     

Numerical study of forced convective heat transfer around a spherical aerostat

Forced convective heat transfer is one of the major factors that dominate the thermal behaviors of aerostats. Due to the large physical size, the convection around an aerostat has high Reynolds numbers. The existing forced convective heat transfer correlations are limited to the Reynolds number lower than 10⁵, which are not appropriate for aerostat applications. Therefore, it is necessary to obtain a convective heat transfer correlation applicable to spherical aerostats at high Reynolds numbers. In this paper, steady convective heat transfer from an isothermal spherical aerostat is numerically investigated. The numerical simulation is carried out by commercial computational fluid dynamic software with the Reynolds number from 20 to 10⁸. The average Nusselt numbers are obtained and compared with those of available in literature. Based on regression and optimization with software, a new piecewise correlation of Nusselt number is proposed. The verification shows that the new correlation is reliable.     

带VSCMGs的航天器姿态稳定及功率补偿控制

基于变速控制力矩陀螺群动力学模型建立其复合控制方程和分系统解耦约束方程,用矩阵投影方法同步设计得到航天器姿态与能量一体控制复合操纵律,利用Lyapunov方法分析了转子轴向惯量误差对姿态控制分系统的影响.根据飞轮转子轴向惯量与功率输出之间的误差关系设计出功率控制补偿器.复合操纵律中的力矩和功率两解形式相同,约束方程使得姿态与能量控制两分系统解耦,便于进行考虑执行机构特性的闭环控制系统性能分析.考虑飞轮转子轴向惯量误差时,姿态控制分系统的输出耗散特性使其能够保持稳定,而功率控制分系统输出误差与转子轴向惯量误差成比例关系,经过补偿后功率输出能满足控制要求.