Synthetic Environments for Simulated Missions

Synthetic environments offer Space Flight projects an opportunity to perform rapid, comprehensive, and rigorous modeling of the critical elements of a mission in order to compute quantitative measures of design performance, associated risk, and actual mission utility value. Significantly, these studies can be performed early in the mission cycle. These synthetic terrains are generated on parallel, high-performance computers and served to remote simulations at near-interactive speeds. The terrain creation uses a realistic sequence of physical phenomena such as cratering and dusting with parametric control of features such as surface roughness and rock density. Terrain resolution may be arbitrary but typically ranges from 0.01 to 10 meters. The terrain server has been used for two rover simulations, one using the actual Sojourner autonomy flight code, and the other a more general algorithm. Monte Carlo studies of rover designs interacting with synthetic environments were executed in parallel to quickly compute performance statistics and risk estimates.     

An investigation of small GOES flares with intense hard X-ray bursts

Most solar flare observations show that intense hard X-ray bursts come from large flares that have a large GOES classification (large peak 1 – 8 Å flux). This correlation, known as the “Big Flare Syndrome”, suggests that more intense flares tend to have harder spectra. We have observed 7 flares that are exceptions to this. These flares have small GOES classifications ranging from B1.4 to C5.5 and peak hard X-ray count rates similar to those often observed from M class flares. This paper examines the cause of this anomoly using the Yohkoh Soft X-Ray Telescope, Hard X-Ray Telescope, and Bragg Crystal Spectrometer. Two hypotheses are proposed for the exceptions: (1) flares with multiple magnetic loops and common footpoints, producing multiple hard X-ray emission regions and low density thermal plasma distributed over a large volume, and (2) high densities in the magnetic loops restricting the propagation of the non-thermal electrons in the loop after magnetic reconnection has occurred and suppressing chromospheric evaporation. Two of the flares support the first hypothesis. The other flares either have data missing or are too small to be properly analysed by the Yohkoh instruments.     

A low cost steerable radio-telescope

We present the technical characteristics of a low-cost radio telescope for solar/non solar observations at decimetric (1200–1700 MHz) and centimetric (2700 and 5000 MHz) wavelengths known as Brazilian Decimetric Array (BDA). The technical specifications of the antenna, tracking system, log-periodic feed, preamplifier and the frequency-synthesised receiver with a Single Side Band (SSB) video output of 2.5 MHz are given.     

Propagation of non-linear ion-sound pulses in dusty plasma waveguides

There are a lot of objects in space associated with dusty plasma inclusions. Such inclusions may bear a prolonged shape and behave as waveguides for ion-sound waves. In the case of space plasmas, the dust particles can possess both negative charge, due to electron attachment, and positive one, due to photoionization. In this paper the propagation of linear and non-linear ion-sound wave pulses in the dusty plasma waveguides, possessing positive charge, is studied. It has been demonstrated that non-linear dynamics of baseband pulse propagation in plasma waveguide possesses essentially non-solitonic behavior. Namely, propagation of a long ion-sound pulse leads to an excitation of a shock-like wave but not a stable localized nonlinear pulse. Also, when a Korteveg–de Vries (KdV) soliton is incident onto the dusty plasma waveguide, some part of the soliton energy is captured by the waveguide and transformed into a multi-pulse structure. Additionally, an interaction of dusty plasma inclusions with KdV soliton can lead to the occurrence of transverse instabilities of the soliton and its eventual destruction.     

Antenna pattern control of planar arrays for long distance communications

As an alternative to standard antennas and due to the advent of low-cost digital processors and materials, adaptive antenna arrays are increasingly considered for applications in long distance communications. The pattern beam control potentialities provide the performance improvement of the communication systems. In this context, this work presents a technique that permits to synthesize the antenna pattern of a planar array. Considering that the relationship between the array factor and the array excitations for the far field region is a Fourier transform in the appropriate variables, the non-uniform sampling procedure is extended for planar arrays. These arrays permit a further control of the antenna pattern since two dimensions of space are used. The technique considers a number of array factor points equal to the array size, which is used to impose appropriated values in the antenna pattern. The produced array factor passes through those points with the desired values, which allows the synthesis of antenna patterns with appropriated characteristics. The theory is presented in order to develop the necessary direct expressions to calculate the array excitation. The array factor can be obtained using the inverse Fourier transform. As application examples, with this technique it is possible to define the level of each sidelobe of the antenna pattern, to control the main beam and to impose nulls in prescribed directions of the pattern.     

Characterization of the cataloged Fengyun-1C fragments and their long-term effect on the LEO environment

The intentional breakup of Fengyun-1C on 11 January 2007 created the most severe orbital debris cloud in history. The altitude where the event occurred was probably the worst location for a major breakup in the low Earth orbit (LEO) region, since it was already highly populated with operational satellites and debris generated from previous breakups. The addition of so many fragments not only poses a realistic threat to operational satellites in the region, but also increases the instability (i.e., collision cascade effect) of the debris population there.     

An analytical model for the prediction of a micro-dosimeter response function

A rapid analytical procedure for the prediction of a micro-dosimeter response function in low Earth orbit (LEO), correlated with the Space Transportation System (STS, shuttle) Tissue Equivalent Proportional Counter (TEPC) measurements is presented. The analytical model takes into consideration the energy loss straggling and chord length distribution of the detector, and is capable of predicting energy deposition fluctuations in a cylindrical micro-volume of arbitrary aspect ratio (height/diameter) by incoming ions through both direct and indirect (δ ray) events. At any designated (ray traced) target point within the vehicle, the model accepts the differential flux spectrum of Galactic Cosmic Rays (GCRs) and/or trapped protons at LEO as input. On a desktop PC, the response function of TEPC for each ion in the GCR/trapped field is computed at the average rate of 30 s/ion. The ionizing radiation environment at LEO is represented by O’Neill’s GCR model (2004), covering charged particles in the 1 ? Z ? 28 range. O’Neill’s free space GCR model is coupled with the Langley Research Center (LaRC) angular dependent geomagnetic cutoff model to compute the transmission coefficient in LEO. The trapped proton environment is represented by a LaRC developed time dependent procedure which couples the AP8MIN/AP8MAX, Deep River Neutron Monitor (DRNM) and F10.7 solar radio frequency measurements. The albedo neutron environment is represented by the extrapolation of the Atmospheric Ionizing Radiation (AIR) measurements. The charged particle transport calculations correlated with STS 51 and 114 flights are accomplished by using the most recent version (2005) of the LaRC deterministic High charge (Z) and Energy TRaNsport (HZETRN) code. We present the correlations between the TEPC model predictions (response function) and TEPC measured differential/integral spectra in the lineal energy (y) domain for both GCR and trapped protons, with the conclusion that the model correctly accounts for the increase in flux at low y values where energetic ions are the primary contributor. We further discuss that, even with the incorporation of angular dependency in the cutoffs, comparison of the GCR differential/integral flux between STS 51 and 114 TEPC measured data and current calculations indicates that there still exists an underestimation by the simulations at low to mid range y values. This underestimation is partly related the exclusion of the secondary pion particle production from the current version of HZETRN.     

DPOD2005: An extension of ITRF2005 for Precise Orbit Determination

For Precise Orbit Determination of altimetry missions, we have computed a data set of DORIS station coordinates defined for specific time intervals called DPOD2005. This terrestrial reference set is an extension of ITRF2005. However, it includes all new DORIS stations and is more reliable, as we disregard stations with large velocity formal errors as they could contaminate POD computations in the near future. About 1/4 of the station coordinates need to be defined as they do not appear in the original ITRF2005 realization. These results were verified with available DORIS and GPS results, as the integrity of DPOD2005 is almost as critical as its accuracy. Besides station coordinates and velocities, we also provide additional information such as periods for which DORIS data should be disregarded for specific DORIS stations, and epochs of coordinate and velocity discontinuities (related to either geophysical events, equipment problem or human intervention). The DPOD model was tested for orbit determination for TOPEX/Poseidon (T/P), Jason-1 and Jason-2. Test results show DPOD2005 offers improvement over the original ITRF2005, improvement that rapidly and significantly increases after 2005. Improvement is also significant for the early T/P cycles indicating improved station velocities in the DPOD2005 model and a more complete station set. Following 2005 the radial accuracy and centering of the ITRF2005-original orbits rapidly degrades due to station loss.     

Increased BLSS closure using mineralized human waste in plant cultivation on a neutral substrate

The purpose of this work was to study the full-scale potential use of human mineralized waste (feces and urine) as a source of mineral elements for plant cultivation in a biological life support system (BLSS). Plants that are potential candidates for a photosynthesizing link were grown on a neutral solution containing human mineralized waste. Spring wheat Triticum aestivum L., peas Pisum sativum L. Ambrosia cultivar and leaf lettuce Lactuca sativa L., Vitaminny variety, were used. The plants were grown hydroponically on expanded clay aggregates in a vegetation chamber in constant environmental conditions. During plant growth, a determined amount of human mineralized waste was added daily to the nutrient solution. The nutrient solution remained unchanged throughout the vegetation period. Estimated plant requirements for macro-elements were based on a total biological productivity of 0.04 kg day⁻¹ m⁻². As the plant requirements for potassium exceeded the potassium content of human waste, a water extract of wheat straw containing the required amount of potassium was added to the nutrient solution. The Knop’s solution was used in the control experiments.