大功率无电极高密度等离子体电磁推进概述

无电极高密度等离子体电磁推进技术已成为未来深空探测、载人航天和货运、太阳能电站以及航天器在轨服务与维护等空间任务中极具竞争力的核心推进技术之一。在梳理不同无电极等离子体电磁加速机制基础上,开展大功率无电极高密度等离子体电磁推进技术性能对比,给出新概念无电极场反构型电磁推进技术向未来超大功率拓展的优势和发展潜力,同步分析了该技术亟需解决的关键基础问题,旨在为中国新概念场反构型电磁推进技术的研发提供理论基础。     

基于全局稀疏地图的AGV视觉定位技术

为了实现自动导引车（AGV）在复杂工业环境下的高精度定位,克服环境变化给定位带来的影响,提出了基于全局稀疏地图的视觉定位方法。首先,设计了大容量二维编码点,作为人工路标铺设在工业环境的地面;然后,基于一种四边形识别算法,在复杂工业环境中准确分割和识别二维编码点;最后,利用二维编码点提供的编码信息,鲁棒匹配图像中的特征点,并以此为基础,使用一种分参数块优化的三维重建策略,实现了工业环境的大规模地图构建,为AGV视觉定位提供了一种稀疏电子地图。AGV视觉的定位通过匹配车载视觉传感器图像中的特征点和稀疏电子地图实现。停车重复定位精度小于0.5 mm,角度偏差小于0.5°,轨迹平均位移误差小于0.1%。实际应用结果表明,该方法能在复杂工业环境中实现AGV视觉的定位,定位的速度和精度方面都满足工业应用的要求,为AGV的视觉定位提供了新的思路。      

基于压电纤维复合材料的航天器动力学建模与振动抑制

压电纤维复合材料(MFC)在柔性航天器的振动主动抑制中具有很好的应用前景。利用哈密顿原理和压电驱动的载荷比拟方法,建立了带MFC压电驱动的离散形式的刚柔耦合动力学方程,采用线性二次型最优控制(LQR)算法进行主动控制。结果表明：在航天器的柔性体受到脉冲载荷激励条件下,使用MFC驱动器可以实现航天器挠性振动的快速抑制,并且同时保持中心刚体姿态的稳定性,即能够实现挠性振动与姿态运动的协同控制。基于MFC的主动控制方法对于高频响应也具有较好的控制效果。对于柔性占优的航天器,采用MFC的主动控制优于被动控制。本文方法在处理具有复杂柔性体的航天器时更具优势,更适合于工程应用。     

地球同步轨道星地量子信道特性研究

为了研究地球同步轨道量子密钥分发过程中星地量子信道特性，项目团队研制了搭载于实践二十卫星的极弱光偏振态分发设备，开展了地球同步轨道卫星与地面间光子偏振态的传输实验。实验时，星载偏振光分发设备根据遥控指令以50MHz频率驱动四个激光器出光，分发|0〉、|π/2〉、|π/4〉和|3π/4〉四种偏振态光子，经过长距离的空间传输后由地面站望远镜接收，最后由超导探测器探测。研究结果表明，地球同步轨道卫星到地面站的光学链路衰减约为100~110 dB，通道误码率约为2%~8%，满足量子密钥分发误码率的安全性要求。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

5G通导遥一体化在林业资源管理中的应用

在5G快速发展的时代背景下，为解决林业资源管理中网络覆盖有限、即时通信困难和遥感数据利用不充分等问题，本文探讨了融合通信、导航、遥感卫星系统与地面移动通信网络，实现即时通信、精准定位、遥感数据按需服务的可行性，提出了“云+端”的5G通导遥融合应用模式，推动新一代航天技术赋能智慧林业建设。     

液液同轴离心式喷嘴喷雾过程研究进展

内部流动主要研究了流量系数、液膜厚度和气核半径,分析了内部流场,少量研究涉及内外喷嘴液膜互击、液膜表面波振幅和频率等方面。液液喷嘴外部液膜流动及喷雾特性的研究开展较多,观测了不同工况、结构参数下内外液膜流动形态,少数学者使用理论方法分析了液膜破碎机理。对喷雾特性的研究主要是获得了喷雾锥角、破碎长度、液膜振荡频率等的变化规律,并进一步研究了SMD、液滴速度、混合特性等的变化规律。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.