微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.     

数字化检验在航电系统集成生产中的应用

针对航电系统集成生产模式下数字化检验工作的深入研究,系统地总结了航电系统集成检验的内容、方法和工作流程。结合某型飞机航电系统集成数字化检验,构建了航电系统集成生产过程中数字化检验标准的框架结构,为实现航电系统集成生产中数字化检验标准和手段的发展提供了宝贵经验。     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.     

Training effectiveness evaluation of helicopter emergency relief based on virtual simulation

Helicopters are playing an increasingly important part in emergency relief, such as earthquake rescue, firefighting and medical transport. With the development of virtual simulation technology, virtual simulation-based training is widely used in the training of the helicopter crew especially for the dangerous and costly missions mentioned above. A complete training effectiveness evaluation method is proposed to evaluate the trainees’ training effect based on virtual simulation in this paper. A key to this method is regarding the complicated process as a discrete event-activity flow system and establishing the evaluation indicator system. Then expert group and Analytical Network Process (ANP) are applied to determine the weight of indicators. When the training data are processed, there is a novel attempt to apply Fuzzy Comprehensive Evaluation (FCE) model to calculate the two categories of indicators. Eventually, an experiment and the analysis were carried out to validate the evaluation method.     

民航卫星通信网可视通信图像压缩编码方法研究

对民航卫星通信网进行可视通信图像压缩编码方法进行了研究。通过在多媒体计算机上进行模拟实验表明，将视频信息及语音信息压缩为64kbps通过TES卫星网传输方案是可行的。     

基于离心加速度信息的单站无源测距定位方法

针对只测向（B0）方法具有收敛速度慢、定位误差大等缺点，提出了一种利用角度及其变化率、离心加速度等信息进行单站无源测距定位的新方法。对该方法的单次测距误差进行了分析，经多次测量定位计算机仿真结果表明，该方法比只测角定位方法、角度及其变化率定位方法具有更高的定位精度和更快的收敛速度，并且具有更广的应用范围。     

基于通用数字信号处理器的雷达坐标测量系统

介绍了由PC机主CPU与TMS320C32(以下简称C32)DSP构成的多目标雷达坐标测量系统，并将任务合理分配给PC机主CPU及C32负担，从而使PC机主CPU和C32在低价位下提供最佳性能。     

模柄的设计探讨

系统地介绍模柄的主要参数、技术要求、设计技巧、结构形式以及选用原则，以便于设计应用。     

CAI课件的创作策略与使用体会

本文结合自己开发和使用《微机应用基础》多媒体教学课件实践过程，简单阐述了几点CAI课件创作的一般策略和使用体会。