变几何径向透平损失模型及其分析

基于99 mm叶轮实验, 分析了变几何径向透平静叶的各种损失以及不同的损失模型.给出了变几何透平静叶冲角损失的定量分析.通过计算对比不同静叶喉部宽度下叶道边界层摩擦损失, 验证了Glass-man模型在计算叶片流道损失时, 与试验结果是相符的.基于NASA损失模型分析了径向透平静叶的尾缘损失, 损失随着出口边厚度呈线性增加, 减小出口边厚度是减小尾缘损失的有效方法.      

航空发动机涡轮前温度场数据分析方法

在航空发动机整机测试条件下,温度场测试具有局限性。介绍了1种发动机涡轮前温度场测试数据的统计分析方法,该统计方法较为有效;引入模糊原理,对统计量进行了概率分析,使得统计量评估更加完善。     

机内测试虚警分析和控制

现代飞行器广泛采用机内测试(Built-intest,BIT)技术,以便对其内部故障进行自动检测、诊断和隔离,但是常规BIT面临诊断能力不足和诊断模糊性等问题,导致BIT虚警率高,难以有效发挥其应有的作用.本文论述了BIT虚警的基本理论、虚警的危害及现状,并从BIT虚警产生的原因分析入手,提出了解决虚警问题的一些方法和措施.     

Two-Way-Coupling Method for Rapid Aerothermoelastic Analyses of Hypersonic Wings

Several types of coupling methods for resolving aerothermoelastic problems associated with hypersonic wings are summarized,and the appropriate coupling methods for engineering calculations are selected.Then,the calculation and analysis methods for the subdisciplines in this field are introduced,and the time step issue is discussed.A two-way-coupling rapid static aerothermoelastic method for analyzing hypersonic wings is proposed.This method considers thermal effects and is used to conduct an aerothermoelastic response analysis for a hypersonic wing.In addition,the aerodynamic force,heat flux,structural deformation and temperature field are obtained.The following three conclusions are drawn.First,the heating effect has a significant impact on the static aeroelastic response of hypersonic wings;therefore,thermal protection shields are essential.Second,the application of thermal protection shields reduces the differences in the calculation results between the one-and two-way-coupling methods.Third,hypersonic wings exhibit large thermal deformation under high-temperature environments,and in certain cases,the thermal deformation is even larger than the deformation caused by aerodynamic force.     

Modeling and Optimal Design of Planar Linkage Mechanism of Coupled Joint Clearances for Manufacturing

The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.     

航天器视场遮挡分析方法研究

敏感器视场遮挡分析是航天器构型布局设计的重要组成部分,针对大型在轨变构型航天器敏感器视场遮挡分析工作量大、出错率高、遮挡率无法量化等特点,本文提出一种基于敏感器第一视角的视场遮挡快速分析方法。该方法通过设置第一视角图像蒙版及图像映射,模拟方锥形、圆锥形、球形等各类敏感器视场,通过逐个像素比对,计算视场遮挡率和遮挡方位。使用此方法建立了空间站敏感器视场遮挡分析系统,结果表明新方法能够显著提高视场遮挡分析效率和准确率,并且为机构类部件运动过程对敏感器视场遮挡的分析提供了有效工具。     

针对旋翼流场模拟的自适应网格算法

针对基于格心格式求解器的旋翼流场模拟,提出了相应的自适应笛卡尔网格的数据存储结构及自适应算法。给出了相应的单元处理策略,简化了对自适应笛卡尔网格的处理;对于频繁的自适应加密过程中产生的大量重复点,采用了高效的交替数字树算法(Alternating digital tree,ADT)予以删除;对于自适应疏化过程中产生的大量无用点,提出了标记-删除-移动(Mark,delete,move,MDM)算法予以快速地删除,减少了不必要的计算资源消耗。对CaradonnaTung旋翼在不同悬停状态下进行了模拟验证,对比了压力分布系数与桨尖涡位置。之后对HELISHAPE 7A旋翼在前飞情况下进行了模拟验证,计算值与实验值吻合。此外,求解器对桨尖涡的捕捉效果得到了明显的提高,表明本文方法具有良好的有效性与鲁棒性。     

四旋翼倾转飞行器操纵冗余设计

建立了四旋翼倾转飞行器旋翼、机翼、机身的非线性气动模型和飞行动力学模型,并在Matlab/Simulink环境下搭建了仿真模型,根据仿真模型计算各个操纵面的操纵效率,确定了不同状态下各个通道需要用到的操纵方式,结合飞行动力学模型和操纵方式,在纵向通道上进行了全包线的配平计算,表明了操纵策略的可行性。     

光荣与梦想--写在神舟六号载人航天飞行圆满成功之际

又是金秋,又是十月。两年前,杨利伟一飞冲天,实现了中华民族的千年飞天梦想;两年后,费俊龙、聂海胜畅游太空100多个小时,为中国航天续写了新的辉煌。激动、振奋、喜悦,赞美、掌声、鲜花……种种美好的字眼,比以往任何时候都更多地属于航天人。此时,中国航天是举国、举世瞩目的焦点。但是,在几乎众口一词的赞美声中,我们也会听到另一种意见:中国为什么要搞载人航天?那么多的钱,拿来资助贫困学生不好吗?用来改变农村落后的卫生条件不好吗?这种声音,无论国内国外都有。对于认识上的差异,我们不妨心平气和地探讨一下,来回答这个“为什么”。     

基于特征模型的全系数自适应控制系统稳定性研究

讨论了基于特征模型的黄金分割加逻辑微分自适应控制律组成闭环系统的稳定性问题。针对参数未知、线性定常或慢时变的二阶不稳定对象,本文给出了在采样周期满足一定条件下,上述闭环系统渐近稳定的充分条件,其中包含对于时变参数变化范围和非线性阻尼系数的约束条件。