Active aeroelastic control over a four control surface wing model

This paper describes the procedure implemented to design, develop and test an aeroelastic control system installed on a forward swept wing of the aeroelastic demonstrator X-DIA. A control method directly based on Nissim aerodynamic energy concept has been chosen. Two different modeling techniques have been adopted for the calculation of generalized aerodynamic forces, such as doublet lattice method and computational fluid dynamics and the obtained results are finally compared. The latter approach, applied to better estimate the control surfaces effectiveness, requires the capability to correctly model the control surface rotation and the grid deformation, usually addressed as non-trivial problems in CFD based aeroelastic analysis. A genetic algorithm optimization technique has been adopted to state and refine all the control gains.     

Zinc air fuel cell for industrial and specialty vehicles

Metallic Power has demonstrated a regenerative zinc air fuel cell for applications in industrial and specialty vehicles. The fuel cell uses zinc pellets and atmospheric oxygen to generate electric current; the reaction product is zinc oxide, which is collected in a tank. In its present stage of development the 36 V fuel cell will deliver approximately 6 kWh, with a maximum power of 4 kW. The device is refueled at a zinc recycling/refueling station where zinc pellets are pumped into each cell; ZnO is pumped from the tank and replaced with KOH electrolyte. The recycling/refueling unit uses an electrolytic process to convert zinc oxide powder into zinc pellets     

A Class of TVD Type Combined Numerical Scheme for MHD Equations With a Survey About Numerical Methods in Solar Wind Simulations

It has been believed that three-dimensional, numerical, magnetohydrodynamic (MHD) modelling must play a crucial role in a seamless forecasting system. This system refers to space weather originating on the sun; propagation of disturbances through the solar wind and interplanetary magnetic field (IMF), and thence, transmission into the magnetosphere, ionosphere, and thermosphere. This role comes as no surprise to numerical modelers that participate in the numerical modelling of atmospheric environments as well as the meteorological conditions at Earth. Space scientists have paid great attention to operational numerical space weather prediction models. To this purpose practical progress has been made in the past years. Here first is reviewed the progress of the numerical methods in solar wind modelling. Then, based on our discussion, a new numerical scheme of total variation diminishing (TVD) type for magnetohydrodynamic equations in spherical coordinates is proposed by taking into account convergence, stability and resolution. This new MHD model is established by solving the fluid equations of MHD system with a modified Lax-Friedrichs scheme and the magnetic induction equations with MacCormack II scheme for the purpose of developing a combined scheme of quick convergence as well as of TVD property. To verify the validation of the scheme, the propagation of one-dimensional MHD fast and slow shock problem is discussed with the numerical results conforming to the existing results obtained by the piece-wise parabolic method (PPM). Finally, some conclusions are made. This revised version was published online in August 2006 with corrections to the Cover Date.     

Biodosimetry of heavyions by interphase chromosome painting

We report measurements of chromosomal aberrations in peripheral blood lymphocytes from cancer patients undergoingradiotherapy treatment. Patients with cervix or esophageal cancer were treated with 10 MV X-rays produced at a LINAC accelerator, or high-energy carbon ions produced at the HIMAC accelerator at the National Institute for Radiological Sciences (NIRS) in Chiba. Blood samples were obtained before, during, and after the radiation treatment. Chromosomes were prematurely condensed by incubation in calyculin A. Aberrations in chromosomes 2 and 4 were scored after fluorescence in situ hybridization with whole-chromosome probes. Pre-treatment samples were exposed in vitro to X-rays, individual dose-response curves for the induction of chromosomal aberrations were determined, and used as calibration curves to calculate the effective whole-body dose absorbed during the treatment. This calculated dose, based on the calibration curve relative to the induction of reciprocal exchanges, has a sharp increase after the first few fractions of the treatment, then saturates at high doses. Although carbon ions are 2–3 times more effective than X-rays in tumor sterilization, the effective dose was similar to that of X-ray treatment. However, the frequency of complex-type chromosomal exchanges was much higher for patients treated with carbon ions than X-ray.     

A capillary-driven root module for plant growth in microgravity.

A new capillary-driven root module design for growing plants in microgravity was developed which requires minimal external control. Unlike existing systems, the water supply to the capillary-driven system is passive and relies on root uptake and media properties to develop driving gradients which operate a suction-induced flow control valve. A collapsible reservoir supplies water to the porous membrane which functions to maintain hydraulic continuity. Sheet and tubular membranes consisting of nylon, polyester and sintered porous stainless steel were tested. While finer pore sized membranes allow greater range of operation, they also reduce liquid flux thereby constraining system efficiency. Membrane selection should consider both the maximum anticipated liquid uptake rate and maximum operating matric head (suction) of the system. Matching growth media water retention characteristics to the porous membrane characteristics is essential for supplying adequate liquid flux and gas exchange. A minimum of 10% air-filled porosity (AFP) was necessary for adequate aeration. The capillary-driven module maintained hydraulic continuity and proper gas exchange rates for more than 80 days in a plant growth experiment.     

Approaches in the determination of plant nutrient uptake and distribution in space flight conditions.

The effective growth and development of vascular plants rely on the adequate availability of water and nutrients. Inefficiency in either the initial absorption, transportation, or distribution of these elements are factors which impinge on plant structure and metabolic integrity. The potential effect of space flight and microgravity conditions on the efficiency of these processes is unclear. Limitations in the available quantity of space-grown plant material and the sensitivity of routine analytical techniques have made an evaluation of these processes impractical. However, the recent introduction of new plant cultivating methodologies supporting the application of radionuclide elements and subsequent autoradiography techniques provides a highly sensitive investigative approach amenable to space flight studies. Experiments involving the use of gel based 'nutrient packs' and the radionuclides calcium-45 and iron-59 were conducted on the Shuttle mission STS-94. Uptake rates of the radionuclides between ground and flight plant material appeared comparable.     

Study of maximum electron density NmF2 at Karachi and Islamabad during solar minimum (1996) and solar maximum (2000) and its comparison with IRI

The monthly hourly medians of maximum electron density, N_mF₂, at two Pakistani ionospheric stations, Karachi and Islamabad, have been determined for solar minimum (1996) and solar maximum (2000) and compared with IRI predictions using the URSI coefficients. At night and pre-noon period the N_mF₂ values at both stations are almost equal during the 2 years. However, at post-noon the values at Karachi are considerably larger than those at Islamabad due to the equatorial or geomagnetic anomaly. Karachi (geomag. coord. 16.44°N, 139.08°E) lies near the region of the equatorial anomaly (+20 and −20 geomagnetic latitude), so most of the N_mF₂ values at Karachi are larger than those at Islamabad (geomag. coord. 24.46°N, 145.67°E). The maximum monthly values of N_mF₂ show a semi-annual variation at Karachi and Islamabad both during 1996 and 2000 as predicted by IRI.     

A new spectral index to detect Poaceae grass abundance in Mongolian grasslands

The objectives of the present study were to develop a new index based on remotely-sensed data for detecting the abundance of grasses in the family Poaceae, which has a high palatability for livestock in Mongolia, and to map the distribution of these grasses in the semi-arid Mongolian steppes. We measured ground-based spectral reflectance of pure plant leaves – including Poaceae grasses – and soils, as well as in-situ in the Mongolian grasslands. The hyper-spectral data, taken by a spectroradiometer, were converted into four multi-spectral bands (i.e., blue, green, red, and NIR) to simulate satellite-based imagery data. In order to magnify the characteristics of the spectral signal of Poaceae, NGBDI (Normalized Green-Blue Difference Index), NGRDI (Normalized Green-Red Difference Index), NDVI (Normalized Difference Vegetation Index), NNBDI (Normalized NIR-Blue Difference Index) were calculated from the four multi-spectral reflectance values. Poaceae Abundance Index (PAI) was derived by combining these four normalized difference indices. PAI was found out to be a good indicator to discriminate Poaceae grass from the other plant spectral data.