绿色制造中的干切削技术

冷却润滑液的存储、使用以及废弃处理需要专门的物流系统,因而费用很高;冷却润滑液处理不当会对人的健康以及环境造成危害;工件经过湿加工后必须进行清洁处理,这都费时费力,同时增加了对系统的要求.基于上述原因,近年来干切削技术受到广泛关注.     

Finite-dimensional filters with nonlinear drift. V: solution to Kolmogorov equation arising from linear filtering with non-Gaussian initial condition

Despite its usefulness, the Kalman-Bucy filter is not perfect. One of its weaknesses is that it needs a Gaussian assumption on the initial data. Recently Yau and Yau introduced a new direct method to solve the estimation problem for linear filtering with non-Gaussian initial data. They factored the problem into two parts: (1) the on-line solution of a finite system of ordinary differential equations (ODEs), and (2) the off-line calculation of the Kolmogorov equation. Here we derive an explicit closed-form solution of the Kolmogorov equation. We also give some properties and conduct a numerical study of the solution.     

Interference between FM Carriers and a Digitally Modulated SCPC Circuit

The interference from the digital single channel per carrier (SCPC) circuits into frequency-modulated carrier systems has been calculated by convolving the desired and the interfering spectra extending the previously published works. Resulting interference noise power in FDM/FM systems covering a wide range of modulation indices and basebands has been presnted. Also plots of interference noise power as a function of the number of SCPC circuits have been presented for various values of carrier power to interference power ratios.     

Satellite fault diagnosis using a bank of interacting Kalman filters

The main objective of this work is development and testing of a detection, isolation, and diagnosis algorithm based on interacting multiple model (IMM) filters for both partial (soft) and total (hard) reaction wheels faults in a spacecraft. This is shown to be accomplished under a number of different faulty mode scenarios for these actuators associated with the attitude control system (ACS) of a satellite. Various operating and faulty conditions due to changes and anomalies in the temperature, the power supply line voltage, and the loss of effectiveness of the torque and the current are considered in each reaction wheel associated with the three axes of the satellite. Once a fault mode is detected and isolated the recovery procedure can subsequently be engaged by invoking appropriate switching control strategies for the ACS. The application of a bank of interacting multiple Kalman filters for detection and diagnosis of anticipated reaction wheel failures in the ACS is described and developed. Compared with other model-based fault detection, diagnosis and isolation(FDDI) strategies developed in the control systems literature, our FDDI strategy is shown, through extensive numerical simulations, to be more accurate and robust with potential for extension to a number of other application areas.     

Matched Filter Criteria and Range Weighting for Weather Radar

The effective weighting function for weather radar is defined. This weighting function considers the effects of both the transmitted signal and the receiver filter. It is used to assign effective ranges to samples taken at prescribed times. For uniformly distributed targets it is shown that "signal"-to-noise ratio depends on the receiver filter, transmitted signal envelope, and receiver noise spectral density. Maximization of this signal-to-noise ratio when range resolution constraints are imposed is discussed, and a receiver design approach specifically adapted for Doppler weather radars is developed.     

Detection of polyphase pulse compression waveforms using the radon-ambiguity transform

The recently developed Radon-ambiguity transform (RAT) detects unknown linear frequency modulated (LFM) signals by computing line integrals through the origin of the signal's ambiguity function (AF) magnitude. It is shown that this method also detects the step LFM and frequency-derived polyphase pulse compression waveforms with varying performance degradation. Simulations are provided to estimate the detection loss relative to the LFM.     

Calibration of the MERIC full-polarimetric radar: theory and implementation

This paper describes the architecture and calibration design of the experimental ground based radar station MERIC. This full-polarimetric radar is conceived for the analysis and the recognition of non cooperative aircraft in flight.We carefully study how the full-polarimetric capability is obtained for a simultaneous transmit (simultaneous transmission of two linear FM with opposite slopes) radar system, using analogue deramping with a replica.The phase distortions of the signal propagating in the four polarimetric channels are carefully estimated. We define a phase calibrating method compatible with the outdoor measurements conditions and few constraints on reference targets.We show the phase accuracy obtained with the proposed calibration method on real measurements.     

An Optimum Phase Reference Detector for Fully Modulated Phase-Shift Keyed Signals

Many modern telemetry systems which use phase-shift keying (PSK) have receivers which derive a coherent reference from the fully modulated PSK signal itself and thus conserve the energy which otherwise would be allocated to a discrete reference signal. In this paper, an optimum receiver structure for estimating a phase reference from the PSK signal itself is derived and its realization discussed. It is shown that at low signal-to-noise ratios, the optimum detector can be realized with a Costas loop. Since a Costas loop and squaring loop exhibit identical performance, it follows that either of these simple devices gives optimum performance for low-input signal-to-noise ratios.     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.