The 2.5 to 5 microns spectrum of comet Halley from the IKS instrument of Vega

Results of the 2.5–5 micron spectroscopic channel of the IKS instrument on Vega are reported and the data reduction process is described. H₂O and CO₂ molecules have been detected with production rates of 10³⁰ s⁻¹ and 1.5 10²⁸ s⁻¹ respectively. Emission features between 3.3 and 3.7 microns are tentatively attributed to CH - bearing compounds - CO is marginally detected with a mixing ratio CO/H₂O 0.2. OH emission and H₂O - ice absorption might also be present in the spectra.     

Exobiology and future Mars missions: The search for Mars'' earliest biosphere

The primordial Mars may have possessed a thick carbon dioxide atmosphere, with liquid water common on the surface, similar in many ways to the primordial Earth. During this epoch, billions of years ago, the surface of Mars could have been conducive to the origin of life. It is possible that life evolved on Mars to be later eliminated as the atmospheric pressure dropped. Analysis of the surface of Mars for the traces of this early martian biota could provide many insights into the phenomenon of life and its coupling to planetary evolution.     

SIGMA observations of hard X-ray and soft gamma-ray emission from X-ray binaries

After more than two years of operation, the imaging γ-ray SIGMA telescope has accumulated several days of observation toward well known X-ray binaries. Four bright sources falling in this category have been detected so far: The pulsar GX 1+4 near the center of our galaxy, the stellar wind accreting system 4U 1700-377, and the black hole candidates Cygnus X-1 and GX 339-4. Moreover, SIGMA have observed three transients sources, which turned out to be also hard X-ray sources : The burster KS 1731-260, Tra X-1, and the Musca Nova. The properties of these systems in the SIGMA domain will be reviewed and a spectral distinction between black holes and neutron stars will be sketched.     

Observations of diffuse galactic positron annihilation radiation

The Galactic plane was scanned nearly three times by the UCSD/MIT Hard X-Ray and Low Energy Gamma-Ray Experiment on HEAO-1 from August 1977 through September 1978. Its Medium Energy Detectors were of the NaI/CsI phoswich type and operated over the 100 keV to 2 MeV range, with a 17° FWHM field of view and a 9% energy resolution at 511 keV. Sky maps for each epoch of observation were constructed in several energy bands. After subtraction of known point sources, a component associated with the galactic plane remains, whose spectrum is consistent with a power law and a positron annihilation spectrum. In the 333 to 583 keV energy band the flux is concentrated within ±35° of the galactic center, and the ratio of flux/radian (anticenter) is high, with a 2σ lower limit of 13. The parameters of the galactic center region's annihilation spectrum are positronium fraction of 0.9±0.1 and 511 keV flux of (2.0±0.7)×10⁻³ photons/cm²-sec-rad.     

基于磨粒分析方法的发动机磨损故障智能诊断技术

磨粒是研究磨损状态时最直接、最重要的信息元，通过对滑油中的磨粒进行监测与分析来判断机械设备的磨损情况，可以预防并监测机械设备的磨损故障。本文运用显微形态学方法建立了一套磨粒显微特征描述体系，以提取磨粒信息并进行磨损故障的模式识别；并结合摩擦学理论和人工智能方法，实现对发动机磨损故障的智能诊断和预测。     

含连续／离散变量结构优化中的神经网络与变尺度模拟退火方法

传统的优化方法难于有效地处理含有连续／离散混合变量优化问题，本文介绍了一种改进的变尺度模拟退火方法并与人工神经网络能量函数模型相结合，用于求解含连续／离散设计变量的工程结构优化问题，较好地解决了模拟退火技术用于工程结构优化时选取具有全局性的初始点困难及迭代次数较多的弱点。算例表明，该方法可以使模拟退火算法从局部最优的陷阱中跳出，最后求出整体最优解。     

一种新的射频仿真目标位置控制方法与软件研究

针对射频目标仿真系统中目标位置的控制，本文通过对国内外目标位置控制的常用方法进行研究，提出一种新的通用目标位置控制方法，该方法适用于任何天线分布的面阵。利用这种新的方法编写了基于三元阵天线阵面的射频仿真目标位置控制软件，实现对多目标在天线阵面上多种轨迹运动下的高速准确的定位，并能实时监视目标的运动状态和运动轨迹。     

惩罚函数法在发动机性能计算中的应用

按照涡喷发动机工作时遵守的气动热力学定律，建立了发动机的稳定数学模型，并针对双轴涡轮发动机性能计算的非线性数学模型，利用优化和最优控制理论中的惩罚函数法，对发动机性能进行了基于约束的最优求解程序设计，利用程序对某型发动机的稳定飞行特性进行了计算，计算结果表明，使用惩罚函数法求出的特性曲线变化规律正确，发动机平衡方程的解的精度更高，在此基础上得出的发动机飞行特性也更准确。另外惩罚函数法对初值的要求很低，迭代运算不易发散。     

SoftBase查询优化器的设计与实现

查询优化是数据库系统中一个必不可少的模块，本文在当前查询优化技术发展的基础上讨论了SoftBase数据库的查询优化器的设计和实现，给出了SAoftBase数据库查询优化处理的一般过程，并着重探讨了查询优化的两个主要模块，查询重写和基于代价评估的计划优化。在计划优化模块中，详细讨论了存取路径的选择和代价评估的计算方法，最后对测试结果进行了分析，结果表明优化后的SoftBase查询效率比原系统有了明显的提高。     

提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。