Solar Models with Non-Standard Chemical Composition

The OPAL monochromatic opacity tables are used to evaluate the impact of a non-standard chemical composition on solar models. A calibrated solar model with consistent diffusion including the effect of radiative forces and ionization on drift velocities is presented. It is shown that surface abundances are predicted to change slightly more than in traditional solar models where these refinements are not included. All elements included in the model settle at similar rates which is reflected in the relative variation in surface abundances ranging from 7.5% for calcium to 8.8% for argon. The structural difference between the consistent model and the traditional model is small, with a maximum effect of 0.3% for the isothermal sound speed at the base of the convection zone. The settling of CNO is only marginally affected. Opacity profiles have also been calculated with varying abundances for volatile elements, for which the abundances are poorly known, and other selected elements. It is shown that if one allows a 10% variation of these elements individually one can expect a peak Rosseland mean opacity variation of 3% for oxygen, a little less 2% for Si and Ne, and around 1% for Mg and S in the radiative zone. Other light metals and volatile elements have no significant impact on the opacity. This revised version was published online in June 2006 with corrections to the Cover Date.     

Galileo Probe Measurements of D/H and 3He/4He in Jupiter's Atmosphere

The Galileo Probe Mass Spectrometer measurements in the atmosphere of Jupiter give D/H = (2.6 ± 0.7) × 10-5 3He/4He = (1.66 ± 0.05) × 10-4These ratios supercede earlier results by Niemann et al. (1996) and are based on a reevaluation of the instrument response at high count rates and a more detailed study of the contributions of different species to the mass peak at 3 amu. The D/H ratio is consistent with Voyager and ground based data and recent spectroscopic and solar wind (SW) values obtained from the Infrared Spectroscopic Observatory (ISO) and Ulysses. The 3He/4He ratio is higher than that found in meteoritic gases (1.5 ± 0.3) × 10-4. The Galileo result for D/H when compared with that for hydrogen in the local interstellar medium (1.6 ± 0.12) × 10-5 implies a small decrease in D/H in this part of the universe during the past 4.55 billion years. Thus, it tends to support small values of primordial D/H - in the range of several times 10-5 rather than several times 10-4. These results are also quite consistent with no change in (D+3He)/H during the past 4.55 billion years in this part of our galaxy.     

The Solar Isotope Spectrometer for the Advanced Composition Explorer

The Solar Isotope Spectrometer (SIS), one of nine instruments on the Advanced Composition Explorer (ACE), is designed to provide high- resolution measurements of the isotopic composition of energetic nuclei from He to Zn (Z=2 to 30) over the energy range from ∼10 to ∼100 MeV nucl−1. During large solar events SIS will measure the isotopic abundances of solar energetic particles to determine directly the composition of the solar corona and to study particle acceleration processes. During solar quiet times SIS will measure the isotopes of low-energy cosmic rays from the Galaxy and isotopes of the anomalous cosmic-ray component, which originates in the nearby interstellar medium. SIS has two telescopes composed of silicon solid-state detectors that provide measurements of the nuclear charge, mass, and kinetic energy of incident nuclei. Within each telescope, particle trajectories are measured with a pair of two-dimensional silicon-strip detectors instrumented with custom, very large-scale integrated (VLSI) electronics to provide both position and energy-loss measurements. SIS was especially designed to achieve excellent mass resolution under the extreme, high flux conditions encountered in large solar particle events. It provides a geometry factor of ∼40 cm2 sr, significantly greater than earlier solar particle isotope spectrometers. A microprocessor controls the instrument operation, sorts events into prioritized buffers on the basis of their charge, range, angle of incidence, and quality of trajectory determination, and formats data for readout by the spacecraft. This paper describes the design and operation of SIS and the scientific objectives that the instrument will address. This revised version was published online in June 2006 with corrections to the Cover Date.     

What we have not learned from the troubles with the Hubble

The Hubble space-based telescope is a great tribute to our progress in space. The ability to place an optical telescope at a significant distance from the Earth's surface, away from the interference of the planet's unsteady atmosphere, have already paid off by producing magnificent records of astronomical activities in the depths of outer space. In the past the problems with the alignment of the Hubble's optics were blamed on the manufacturers of it's optical components. The hastily set investigation concluded that the problem is a spherical aberration of the primary mirror (the primary mirror is said to be 2 microns too flat at the edges). It is suggested that the real culprit is the Parker Effect. Since the time of Galileo Galilei, all telescopes were built, aligned, and used on the Earth's surface. Hubble is the first telescope to be built and aligned on Earth for use in space. Because of this we have to consider the fundamental differences between the alignment of surface-based and space-based telescopes. For those who missed our article “The Parker Effect and Navigation in Space” published in the January issue. The Parker Effect describes the result of interaction between inertial bodies (anything that has mass) and non-inertial media (light or other E/M fields)     

Energetics of reconnection: A reply

In this article we address several criticisms of Petschek-type reconnection models which have recently been raised by Heikkila. We discuss features of the time-dependent Petschek-type models in the context of the solar wind-magnetosphere interaction, and point out that such models can incorporate and reproduce observed features at the magnetopause, such as plasma jets and erosion of the current sheet. We argue that some of Heikkila's criticisms can be attributed to weaknesses in the analysis due to incomplete experimental information, rather than to flaws in the concept of reconnection per se; in this category we include the question of which instability leads to the localised breakup of the magnetopause current sheet. Other criticisms are based on an adherence to steady-state models, and cannot be sustained within the extended time-dependent theory. We discuss, for example, how the time-dependent model can provide a consistent picture of how energy from the incoming solar wind is transferred and converted as it enters the magnetosphere.     

Effects of polarization and resolution on SAR ATR

Lincoln Laboratory is investigating the detection and classification of stationary ground targets using high resolution, fully polarimetric, synthetic aperture radar (SAR) imagery. A study is summarized in which data collected by the Lincoln Laboratory 33 GHz SAR were used to perform a comprehensive comparison of automatic target recognition (ATR) performance for several polarization/resolution combinations. The Lincoln Laboratory baseline ATR algorithm suite was used, and was optimized for each polarization/resolution case. Both the HH polarization alone and the optimal combination of HH, HV, and VV were evaluated; the resolutions evaluated were 1 ft/spl times/1 ft and 1 m/spl times/1 m. The data set used for this study contained approximately 74 km/sup 2/ of clutter (56 km/sup 2/ of mixed clutter plus 18 km/sup 2/ of highly cultural clutter) and 136 tactical target images (divided equally between tanks and howitzers).     

A relative navigation system for formation flight

A relative navigation system based on both the Inertial Navigation System (INS) and the Global Positioning System (GPS) is developed to support situational awareness during formation flight. The architecture of the system requires an INS/GPS integration across two aircraft via a data link. A fault-tolerant federated filter is used to estimate the relative INS errors based on relative GPS measurements and a range measurement obtained from the data link. The filter is constructed based on a reduced-order model of the relative INS error process. A method for analyzing the filter performance is presented. A case involving two helicopters in formation flight is studied under three different night trajectories to account for the effect of vehicle motion on the INS state transition matrix. The results of the covariance analysis are compared with actual night results over an instrumented test range.     

Optimal number of phased array faces and signal processors for horizon surveillance

The problem of the optimal number of phased array faces for performing 360/spl deg/ horizon surveillance is considered. Assuming the detection performance is the same in all beam positions and the total number of T/R modules is constant, it is shown that the optimal number of array faces is three. This is true whether the arrays are operating simultaneously or sequentially. A parametric analysis is performed between the number of array faces operating simultaneously and the associated cost of simultaneous operation in terms of the size of the array.     

Distributed decision fusion using empirical estimation

The problem of optimal data fusion in multiple detection systems is studied in the case where training examples are available, but no a priori information is available about the probability distributions of errors committed by the individual detectors. Earlier solutions to this problem require some knowledge of the error distributions of the detectors, for example, either in a parametric form or in a closed analytical form. Here we show that, given a sufficiently large training sample, an optimal fusion rule can be implemented with an arbitrary level of confidence. We first consider the classical cases of Bayesian rule and Neyman-Pearson test for a system of independent detectors. Then we show a general result that any test function with a suitable Lipschitz property can be implemented with arbitrary precision, based on a training sample whose size is a function of the Lipschitz constant, number of parameters, and empirical measures. The general case subsumes the cases of nonindependent and correlated detectors.     

Finite-dimensional filters with nonlinear drift. III: Duncan-Mortensen-Zakai equation with arbitrary initial condition for the linear filtering system and the Benes filtering system

We consider the Duncan-Mortensen-Zakai (DMZ) equation for the Kalman-Bucy filtering system and Benes filtering system. We show that this equation can be solved explicitly with an arbitrary initial condition by solving a system of ordinary differential equations and a Kolmogorov-type equation, Let n be the dimension of state space. We show that we need only n sufficient statistics in order to solve the DMZ equation.