Improvement of forebody/inlet integration for hypersonic vehicle

Results of a numerical (CFD) study of the influence of the forebody shape on local flow parameters at a bottom-mounted inlet entrance are presented. The free-stream Mach number is assumed to be 3.5–7.0. Some recommendations on forebody shape optimization are provided. Main characteristics of the air inlet are evaluated.     

Communications and radio determination system using twogeostationary satellites. I. System and experiments

We developed two types of hybrid terminals that can provide both satellite communication and position determination services in one system. One terminal uses the single channel per carrier (SCPC) technique and the other uses the spread spectrum (SS) technique. To evaluate the performance of the two systems, we carried out experiments in Japan and in the Pacific Ocean using two geostationary satellites, ETS-V (150°E) and Inmarsat (180°E). The ranging accuracy between the mobile terminals and the base station via the satellites was found to be about 200 m using the SCPC system and about 10 m using the SS system. The measured positioning accuracy was about 1 km in the SCPC system and about 600 m in the SS system when experiments were carried out near Japan. The experimental results show that the positioning errors were mainly caused by the orbital determination errors of the two satellites. Presented here are the configurations and features of the SCPC and SS terminals, the experimental system, and the experimental results     

A method of technologic audit of technical re-equipment projects in aircraft production enterprises

A method of technologic audit for technical re-equipment of enterprises is considered. The method developed is intended to verify technological solutions of projects of technical re-equipment of enterprises according to indicators of productivity.     

Definition of Wingtip Devices Shape and Dimensions for a Subsonic Airliner

The results of flow field numerical simulation on the typical wing-body prototype of the modern DLR-F4 airliner under sub- and transonic compressible air flow are presented. Using the DLR-F4 CAD model, the effect of the wingtip end plate area and of the cant angle of a typical Whitcomb winglet is studied. The dependencies of the model lift-to-drag ratio increment on the flat wingtip end plate relative area and on the cant angle of an airfoil Whitcomb winglet are obtained. The concept of an elliptic winglet with a variable cant angle that similar to the winglet used on Airbus A350 is studied. A technique is developed for solving the multi-parameter design optimization task for the Whitcomb winglet, taking the maximum lift-to-drag ratio of the wing as a criterion for optimization.     

Parametric Identification of a Return Space Vehicle during Vertical Landing

Real values of parameters for a space vehicle and its steering devices are specified by using the motion parameters measured in flight based on solving the differential equations of motion.     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

Behavior of tethered debris with flexible appendages

Active exploration of the space leads to growth of a near-Earth space pollution. The frequency of the registered collisions of space debris with functional satellites highly increased during last 10 years. As a rule a large space debris can be observed from the Earth and catalogued, then it is possible to avoid collision with the active spacecraft. However every large debris is a potential source of a numerous small debris particles. To reduce debris population in the near Earth space the large debris should be removed from working orbits. The active debris removal technique is considered that intend to use a tethered orbital transfer vehicle, or a space tug attached by a tether to the space debris. This paper focuses on the dynamics of the space debris with flexible appendages. Mathematical model of the system is derived using the Lagrange formalism. Several numerical examples are presented to illustrate the mutual influence of the oscillations of flexible appendages and the oscillations of a tether. It is shown that flexible appendages can have a significant influence on the attitude motion of the space debris and the safety of the transportation process.     

System of maintaining the thermal regime of a space radio telescope

We present the results of developing a system of thermal regime maintenance for the onboard complex of scientific instruments of the space radio telescope installed on the Spektr-R spacecraft. The structure of the system of thermal regime maintenance is presented that includes a set of autonomous systems of constructive elements of the radio telescope. Basic schemes and composition of aggregates are presented, and main principles of operation of the autonomous systems supporting the thermal regime of the radio telescope are considered.     

Three dimensional temperature field in a conducting sphere due to an arbitrarily located split ring heating source

Thermal control of spacecrafts plays an important role in space missions. In the design stage the preliminary thermal analysis of the spacecraft requires an estimate of the conductive thermal resistance between the various spacecraft components. With this in mind, the fully three dimensional problem of determining the thermal field in a conducting sphere with an asymmetric split ring current carrying heating source is resolved in an analytical or almost analytical form, implying either a closed form solution or utmost expressions involving a simple numerical integration. This has immediate application for evaluation of thermal resistance in spacecrafts. Green's function integral techniques are used. Comparisons are made with series solutions and also with purely numerical solutions to contrast the simplicity and highlight the elegance of the present method. Parametric studies reveal expected behavior.