An Adaptive Multiple-Beam Transmitter for Satellite Communications

A multiple-beam satellite communications system that can adaptbeam power to varying beam traffic is proposed. A new type active-array fed, single reflector antenna design and an S band, 5-beamsystem concept including interbeam exchange are described. Basedon these concepts, a high EIRP multiple-beam system with trafficadaptability similar to a single-beam system is realized.     

Software intensive systems safety analysis

Two important elements in the avionics suite of modern aircraft are: the flight control system (FCS) and the flight management system (FMS). The FCS provides the capability to stabilize and control the aircraft, while the FMS is responsible for flight planning and navigation. A clear trend in the aerospace industry is to place greater reliance on software systems, and many FCS and FMS subsystems are implemented primarily in software. For example, within the FCS is the flight guidance system (FGS) that generates roll and pitch guidance commands. Similarly, within the FMS is the vertical navigation (VNAV) function that acts like a third crew member in the cockpit, ordering mode change requests and resetting target altitude values to enable the aircraft to track the vertical flight plan. We have developed formal, executable models of the requirements for the mode logic of a FGS and for portions of the VNAV functionality. We have also conducted a comprehensive software safety analysis on the FGS mode logic model, and are completing the analysis of the VNAV model. This analysis uses as its starting point several "traditional" safety analysis techniques such as a functional hazard assessment (FHA), a fault tree analysis (FTA), and a failure mode effects analysis (FMEA). However, we are also using formal methods techniques known as model checking and theorem proving to verify the presence of safety properties in the model. This paper summarizes the (now completed) safety analysis that was performed on the FGS model, and highlights the similarities and differences with the (still on-going) safety analysis of the FMS model. In particular, we summarize progress made to date in the use of formal methods to verify the presence of the required safety properties in the models themselves.     

Range Contamination and Its Effect on Measurements

Increased sensitivity and dynamic range of the instrumental techniques used in conjunction with experiments on ballistic ranges have brought to the fore many problems arising from contamination in the ranges themselves. This is seldom discussed when experimental results are presented but is frequently the controlling limitation on the accuracy of the measurements. The authors discuss contamination due to dirt and debris resultant from gun operation, gaseous impurities, and projectile-borne impurities as they have occurred at the Re-entry Simulating Range of Lincoln Laboratory. The effects of these contaminants on measurements are discussed and illustrated, and measures for controlling them are outlined. Finally, a particular range operation is described from the standpoint of impurity control.     

Broadband light source for fiber-optic measurement system in spaceborne applications

Measuring temperatures, mechanical loads and derived quantities precisely and reliably play an important role in spaceflight. With spacecraft becoming increasingly complex, upscaling of present telemetry techniques can become cumbersome. Additionally, there are entirely new sensory requirements, resulting from emerging technologies such as smart structures, active vibration damping and composite material health monitoring. It has been demonstrated in preceding studies that these measurements can be advantageously and efficiently carried out by means of fiber-optic systems. The most prominent fiber-optic strain and temperature sensor is the fiber Bragg grating. Typically, multiple fiber Bragg gratings are used to translate entire temperature and strain fields into an optical wavelength information. For the interrogation of these sensors, a broadband or scanning light source is required. Additional requirements with respect to the light source are high intensity and unpolarized illumination of the gratings. These constraints can be met by a light source that is based on amplified spontaneous emission in a rare-earth-doped fiber. In the presented work, a compact light source, adapted for measurement applications and targeted towards space applications, has been developed. The design of this light source is presented, as well as its implementation. The light source has been designed and tested for selected core aspects of space robustness and the results of these tests are summarized.     

Some psychophysiological and behavioral aspects of adaptation to simulated autonomous Mission to Mars

“Mars-105” experiment was executed in March–July 2009 in Moscow, at the Institute for Bio-Medical Problems (IBMP) with participation of European Space Agency (ESA) to simulate some specific conditions of future piloted Mars mission. In the last 35 days of isolation, in order to simulate autonomous flight conditions, some serious restrictions were established for the crew resupply and communication with Mission Control (MC). The objective of the study was to investigate psychophysiological and behavioral aspects (communication) of adaptation during this period of “high autonomy”. We used computerized analysis of the crew written daily reports to calculate the frequencies of utilization of certain semantic units, expressing different psychological functions. To estimate the level of psycho-physiological stress, we measured the concentration of urinal cortisol once in two weeks. To investigate psycho-emotional state, we used the questionnaire SAN, estimating Mood, Activity and Health once in two weeks.During the simulation of autonomous flight, we found out the different tendencies of communicative behavior. One group of subjects demonstrated the tendency to “activation and self-government” under “high autonomy” conditions. The other subjects continued to use communicative strategy that we called “closing the communication channel”. “Active” communication strategy was accompanied by increasing in subjective scores of mood and activity. The subjects, whose communication strategy was attributed as “closing”, demonstrated the considerably lower subjective scores of mood and activity. Period of high autonomy causes specific changes in communication strategies of the isolated crew.     

Spatial Thinking Across the College Curriculum: A Report on a Specialist Meeting

This report presents findings from a specialist meeting of spatially-minded researchers and administrators from education and industry to consider prospects for introducing courses and curricula on spatial thinking in higher education. More than 40 participants explored the rationale for expanding student exposure to concepts, tools, and applications of spatial reasoning across a range of science, engineering, and humanities disciplines. The focus was on what we know and what we need to know to make the case for space, underscoring basic research on what is meant by spatial thinking and on variations in the spatial reasoning skills required in different domains of knowledge. The need for rigorous assessments of learning outcomes associated with different approaches to teaching spatial thinking was emphasized.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

An Automatic Timing Receiver System Based on the Loran-C Navigational Network

This paper describes some new concepts in dealing with the circuitry for Loran-C automatic timing systems. The conventional analog techniques associated with phase-adjusting networks have been replaced by an incremental digital phase-shifting device. The Loran-C period generator includes facilities for delay compensation by means of an epoch monitor producing a 1-Hz output coincident with the master station TOC (time of coincidence). The required initial time information has to be accurate within ± 20 ms. The automatic format identification and decoding equipment together form a system which takes into account the information of every Loran-C pulse. Owing to the use of digital signal treatment, the synchronization accuracy is limited only by the resolution of the incremental phase shift. The automatic cycle selection device is based on sampling techniques where the derivative of the envelope is calculated. The time of coincidence has to be precalculated and fed into the thumbwheel memory of the epoch monitor, which is automatically initiated when the synchronizing operations are concluded. For VLBI purposes and transcontinental use, the accuracy of this system will be better than 1 ?s when post corrections, supplied by the U.S. Naval Observatory, are taken into account.     

On the Measurements of D/H in QSO Absorption Systems Closing in on the primordial abundance of deuterium

We present our measurements of the deuterium to hydrogen ratio (D/H) in QSO absorption systems, which give D/H = 3.40 ± 0.25 × 10-5 based on analysis of four independent systems. We discuss the properties of two systems which provide the strongest constraints on D/H. We outline the systematic effects involved in measurements of D/H and introduce a sophisticated method of analysis which properly accounts for these effects.