The prospects for enhanced international polar-orbiting satellite cooperation

With robust polar satellite missions demonstrated and/or operational in the USA, Europe, Japan, China, Russia, India, and Brazil, and with other nations also likely to develop such capability, this paper examines the prospects for as well as the potential challenges to closer and perhaps more formal international polar satellite cooperation. In suggesting that now is the time to explore the development of a coordinated polar observing system, the present paper identifies potential contributors, assesses the relevance of existing space-based Earth observation international coordination mechanisms, and considers three potential models for a future system.     

Direct measurement of the composition and spectra of cosmic rays above 1 TeV/amu from Jacee

Direct measurements on cosmic ray protons through iron above about 1 TeV/amu have been performed in a series of balloon-borne experiments with emulsion chambers. The measured energy spectra of protons and helium are power laws with exponents of 2.77 ± 0.09 and 2.72 ± 0.11 in the energy range 5 to 500 TeV and 2 to 50 TeV/amu, respectively. The proton spectrum shows no evidence of the steepening near 2 TeV which was reported by other experiments. Helium has a slightly higher intensity compared to extrapolations from lower energy measurements. The heavier elements, carbon to sulfur, show a small tendency for intensity enhancement in the relative abundance above 10 TeV/amu.     

V: SEA LEVEL: Benefits of GRACE and GOCE to sea level studies

The recently published Third Assessment Reports of the Intergovernmental Panel on Climate Change have underlined the scientific interest in, and practical importance of past and potential future sea level changes. Space gravity missions will provide major benefits to the understanding of the past, and, thereby, in the prediction of future, sea level changes in many ways. The proposal for the GOCE mission described well the improvements to be expected from improved gravity field and geoid models in oceanography (for example, in the measurement of the time-averaged, or ‘steady state’, ocean surface circulation and better estimation of ocean transports), in geophysics (in the improvement of geodynamic models for vertical land movements), in geodesy (in positioning of tide gauge data into the same reference frame as altimeter data, and in improvement of altimeter satellite orbits), and possibly in glaciology (in improved knowledge of bedrock topography and ice sheet mass fluxes). GRACE will make many important steps towards these ‘steady state’ aims. However, its main purpose is the provision of oceanographic (and hydrological and meteorological) temporally-varying gravity information, and should in effect function as a global ‘bottom pressure recorder’, providing further insight into the 3-D temporal variation of the ocean circulation, and of the global water budget in general. This paper summaries several of these issues, pointing the way towards improved accuracy of prediction of future sea level change. This revised version was published online in August 2006 with corrections to the Cover Date.     

The measured radiation environment within Spacelabs 1 and 2 and comparison with predictions

To measure the radiation environment in the Spacelab (SL) module and on the pallet, a set of passive and active radiation detectors was flown as part of the Verification Flight Instrumentation (VFI). SL 1 carried 4 passive and 2 active detector packages which, with the data from the 26 passive detectors of Experiment INS006, provided a comprehensive survey of the radiation environment within the spacecraft. SL 2 carried 2 passive VFI units on the pallet. Thermoluminescent dosimeters (TLDs) measured the low linear energy transfer (LET) dose component; the HZE fluence and LET spectra were mapped with CR-39 track detectors; thermal and epithermal neutrons were measured with the use of fission foils; metal samples analyzed by gamma ray spectroscopy measured low levels of several activation lines. The TLDs registered from 97 to 143 mrad in the SL 1 module. Dose equivalents of 330±70 mrem in the SL 1 module and 537±37 mrem on the SL 2 pallet were measured. The active units in the SL 1 module each contained an integrating tissue-equivalent ion chamber and two differently-shielded xenon-filled proportional counters. The ion chambers accumulated 125 and 128 mrads for the mission with 17 and 12 mrads accumulated during passages through the South Atlantic Anomaly (SAA). The proportional counter rates (1 cps at sea level) were 100 cps in the middle of the SAA (mostly protons), 35 cps at large geomagnetic latitudes (cosmic rays) and 100 cps in the South Horn of the electron belts (mostly bremsstrahlung). Detailed results of the measurements and comparison with calculated values are described.     

The Mercury Laser Altimeter Instrument for the MESSENGER Mission

The Mercury Laser Altimeter (MLA) is one of the payload science instruments on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission, which launched on August 3, 2004. The altimeter will measure the round-trip time of flight of transmitted laser pulses reflected from the surface of the planet that, in combination with the spacecraft orbit position and pointing data, gives a high-precision measurement of surface topography referenced to Mercury’s center of mass. MLA will sample the planet’s surface to within a 1-m range error when the line-of-sight range to Mercury is less than 1,200 km under spacecraft nadir pointing or the slant range is less than 800 km. The altimeter measurements will be used to determine the planet’s forced physical librations by tracking the motion of large-scale topographic features as a function of time. MLA’s laser pulse energy monitor and the echo pulse energy estimate will provide an active measurement of the surface reflectivity at 1,064 nm. This paper describes the instrument design, prelaunch testing, calibration, and results of postlaunch testing.     

Revising the Local Bubble Model due to Solar Wind Charge Exchange X-ray Emission

The hot Local Bubble surrounding the solar neighborhood has been primarily studied through observations of its soft X-ray emission. The measurements were obtained by attributing all of the observed local soft X-rays to the bubble. However, mounting evidence shows that the heliosphere also produces diffuse X-rays. The source is solar wind ions that have received an electron from another atom. The presence of this alternate explanation for locally produced diffuse X-rays calls into question the existence and character of the Local Bubble. This article addresses these questions. It reviews the literature on solar wind charge exchange (SWCX) X-ray production, finding that SWCX accounts for roughly half of the observed local 1/4 keV X-rays found at low latitudes. This article also makes predictions for the heliospheric O VI column density and intensity, finding them to be smaller than the observational error bars. Evidence for the continued belief that the Local Bubble contains hot gas includes the remaining local 1/4 keV intensity, the observed local O VI column density, and the need to fill the local region with some sort of plasma. If the true Local Bubble is half as bright as previously thought, then its electron density and thermal pressure are $1/\sqrt{2}$ as great as previously thought, and its energy requirements and emission measure are 1/2 as great as previously thought. These adjustments can be accommodated easily, and, in fact, bring the Local Bubble’s pressure more in line with that of the adjacent material. Suggestions for future work are made.     

Oxidant enhancement in martian dust devils and storms: implications for life and habitability

We investigate a new mechanism for producing oxidants, especially hydrogen peroxide (H2O2), on Mars. Large-scale electrostatic fields generated by charged sand and dust in the martian dust devils and storms, as well as during normal saltation, can induce chemical changes near and above the surface of Mars. The most dramatic effect is found in the production of H2O2 whose atmospheric abundance in the "vapor" phase can exceed 200 times that produced by photochemistry alone. With large electric fields, H2O2 abundance gets large enough for condensation to occur, followed by precipitation out of the atmosphere. Large quantities of H2O2 would then be adsorbed into the regolith, either as solid H2O2 "dust" or as re-evaporated vapor if the solid does not survive as it diffuses from its production region close to the surface. We suggest that this H2O2, or another superoxide processed from it in the surface, may be responsible for scavenging organic material from Mars. The presence of H2O2 in the surface could also accelerate the loss of methane from the atmosphere, thus requiring a larger source for maintaining a steady-state abundance of methane on Mars. The surface oxidants, together with storm electric fields and the harmful ultraviolet radiation that readily passes through the thin martian atmosphere, are likely to render the surface of Mars inhospitable to life as we know it.     

Numerical orbit integration based on Lie series with use of parallel computing techniques

This article outlines necessary steps to perform numerical orbit integrations based on a Lie series approach. Its implementation requires an efficient evaluation of resulting series coefficients. As an example we treat the classical main problem in satellite orbit calculation (_J2$J_2$ only) and the case of a 4×4$4\times 4$-gravity field. All calculations were performed in very high precision with up to 100 significant digits. In comparison to independent third party computations this approach led to superior results referring to the verifiable constancy of various integrals of motion. To achieve a performance similar to classical numerical integrations in terms of acceptable computing time, at least for non-Keplerian motion problems, we exploited parallel computing capabilities. For our examples, run times were improved by several orders of magnitude, depending on the actual chosen precision level (up to a factor of 50,000 in case of double precision). Here we present the mathematical framework of the proposed orbital integration scheme as well as the work flow for its application in a multi-core, parallel computing environment.     

NanoSail-D: A solar sail demonstration mission

In the early to mid-2000s, NASA made substantial progress in the development of solar sail propulsion systems. Solar sail propulsion uses the solar radiation pressure exerted by the momentum transfer of reflected photons to generate a net force on a spacecraft. To date, solar sail propulsion systems were designed for large robotic spacecraft. Recently, however, NASA has been investigating the application of solar sails for small satellite propulsion. The NanoSail-D is a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare is ready for flight and a suitable launch arrangement is being actively pursued. This paper will present an introduction solar sail propulsion systems and an overview of the NanoSail-D spacecraft.