A three-dimensional plasma and energetic particle investigation for the wind spacecraft

This instrument is designed to make measurements of the full three-dimensional distribution of suprathermal electrons and ions from solar wind plasma to low energy cosmic rays, with high sensitivity, wide dynamic range, good energy and angular resolution, and high time resolution. The primary scientific goals are to explore the suprathermal particle population between the solar wind and low energy cosmic rays, to study particle accleration and transport and wave-particle interactions, and to monitor particle input to and output from the Earth's magnetosphere.Three arrays, each consisting of a pair of double-ended semi-conductor telescopes each with two or three closely sandwiched passivated ion implanted silicon detectors, measure electrons and ions above 20 keV. One side of each telescope is covered with a thin foil which absorbs ions below 400 keV, while on the other side the incoming <400 keV electrons are swept away by a magnet so electrons and ions are cleanly separated. Higher energy electrons (up to 1 MeV) and ions (up to 11 MeV) are identified by the two double-ended telescopes which have a third detector. The telescopes provide energy resolution of E/E0.3 and angular resolution of 22.5°×36°, and full 4 steradian coverage in one spin (3 s).Top-hat symmetrical spherical section electrostatic analyzers with microchannel plate detectors are used to measure ions and electrons from 3 eV to 30 keV. All these analyzers have either 180° or 360° fields of view in a plane, E/E0.2, and angular resolution varying from 5.6° (near the ecliptic) to 22.5°. Full 4 steradian coverage can be obtained in one-half or one spin. A large and a small geometric factor analyzer measure ions over the wide flux range from quiet-time suprathermal levels to intense solar wind fluxes. Similarly two analyzers are used to cover the wide range of electron fluxes. Moments of the electron and ion distributions are computed on board.In addition, a Fast Particle Correlator combines electron data from the high sensitivity electron analyzer with plasma wave data from the WAVE experiment (Bougeretet al., in this volume) to study wave-particle interactions on fast time scales. The large geometric factor electron analyzer has electrostatic deflectors to steer the field of view and follow the magnetic field to enhance the correlation measurements.     

Response of the electron energy distribution to an artificially emitted electron beam: Apex experiment

The paper is based on the electron and ion energy spectra measurement on board the main spacecraft of the APEX mission. During the active phase of the experiment an intense electron beam was emitted from the main satellite. The basic cycle of the electron injection is formed by current pulses of different frequencies, duration and intensity. The spacecraft potential changes due to the gun operation were compensated by a low energy Xe plasma generator. The data show that the response of the environment to the beam emission depends not only on injection parameters but on the spacecraft position and orientation with respect to the magnetic field as well. The typical response is an increase of the intensity of the low energy (less than 1 keV) electrons in all directions. In addition, strong field aligned fluxes of electrons and/or ions are observed with energies below the gun energy. An attempt to classify different types of response and to find possible mechanisms which can explain the observed phenomena is made in the present paper.     

Generation of artificial ionospheric plasma density irregularities with prescribed spectra

The creation of artificial plasma density irregularities (AI) with prescribed spectra in the ionospheric heating experiments is discussed. We show that periodic successions of powerful pulses, pumped into the F-region of the ionosphere lead to obtaining AI with the controlled stationary spatial spectrum and allow us to change power low spectral index 2β at least from 2β = 2.2 to 2β = 3.4 by changing of the powerful pulse time schedule.     

Gravity effects on connective tissue biosynthesis by cultured mesenchymal cells.

Quantitative and qualitative aspects of collagen synthesis under microgravity, normal gravity and hypergravity conditions were investigated during the spacelab D-2 mission by incubating human fibroblast cultures with [3H]-proline for 0, 4, 7, 10 and 20 hours. Quantitative analysis revealed an increase of collagen synthesis under microgravity conditions, being 40% higher than 1g controls. Hypergravity samples at 1.44g, 6.6g and 10g showed a decrease in collagen synthesis with increasing g, being down to about 15% at 10g. The relative proportion of collagen from total protein synthesized, the secretion of collagen by the cells, proline hydroxylation of individual collagen alpha-chains and the relative proportions of collagens I, III and V synthesized were not affected at any of the applied conditions.     

International cooperation in assuring continuity of environmental satellite data

In the 25 years since the launch of the first weather satellite, meteorological observations from space have become an essential part of weather forecasting and global environmental monitoring. Beginning in the 1970s, constrained national budgets and the need for a coordinated approach to global satellite observing have caused satellite operators to pursue international cooperation to assure the continuity and compatibility of these systems. This article reviews current bilateral and multilateral cooperation and technical coordination in environmental satellite activities. It also explores the potential for alternative institutional arrangements for maintaining the continuity of environmental satellite data in the decades to come.     

Preliminary results of Cytos 2 experiment.

Cytos 2 experiment, carried out during the French-Soviet manned flight (July 1982), has studied the antibiotics sensitivity of bacteria cultivated in vitro during the orbital flight. The results show an increase of the antibiotics resistance and a larger thickness of the cellular envelope for the inflight cells. The increase of antibiotics resistance can be related to a stimulating effect of space on the cell growth rate or to changes of the cellular envelope structure.     

Order of magnitude analysis of convective effects in dendritic solidification

The different types of convective phenomena which may occur during the dendritic solidification of metallic alloys are discussed from an order of magnitude analysis. Bulk thermal convection and/or interdendritic solutal convection have to be considered according to the values of the experimental data. Scaling laws for the solute boundary layer resulting from bulk thermal convection have already been derived. It is shown here that the interdendritic flow depends on a solutal Grashof number Gr based on the horizontal density gradient and a characteristic length L_s which is of the order of the liquid channels width. For Gr < 1, which is generally verified in practical cases, the interdendritic flow velocity U_r is proportional to the Grashof number. This a priori law compares favorably with the results of horizontal solidification experiments where the mean interdendritic flow velocity has been estimated from the resulting measured macrosegregation. In these experiments, as well as for most horizontal dendritic solidifications of metallic alloys at 1 g, the ratio $\text{U}{}_{\mathrm{r}}\text{R}$ (R is the growth rate) is of order one. In order to cancel the interdendritic flow effects, this ratio has to be lowered by one order of magnitude. According to our analysis, this can be obtained by performing the experiments either at a slightly reduced g level (～10^?1 g), or at 1 g in a vertical stable configuration with a sufficiently low residual horizontal thermal gradient.     

Deceleration and heating constrained footprint of shuttle vehicles

With increasing frequency in shuttle operation, it is of interest to have more than one or two landing fields within the boundary of the reachable area of the reentry vehicle. This boundary, called the footprint, depends on the aerodynamic characteristics of the vehicle and is severely restricted by the deceleration and heating constraints imposed upon the atmospheric reentry trajectory. This paper gives a general assessment of the footprint as a function of various deceleration and heating constraints. The difficulties in the computation of the three-dimensional reentry trajectories with optimal modulation in both the angle-of-attack and the bank angle are alleviated by the following devices: (a) nondimensionalizing of the equations of motion and use of the density as the altitude variable; (b) use of the classical integrals of the motion; (c) transformation of the adjoint variables into physical variables; and (d) spherical rotation of the coordinates.     

Control of an orbiting flexible square platform in the presence of solar radiation

A mathematical model for the solar radiation forces and moments acting on a square plate (platform) in orbit is obtained by considering the plate mode shapes as combinations of free-free beam shape functions. The moment expressions for a plate of arbitrary reflectivity coefficient are obtained as a function of the solar incidence angle. It is seen that only the first three flexible modes of the plate generate a first order net moment about the center of mass, and that the solar radiation pressure does not influence the flexible modes of the plate for small amplitude vibrations. The solar radiation disturbance model is then included in the dynamic model of a square plate nominally oriented along the local vertical and having the major surface of the plate normal to the orbital plane. The roll angle of the plate is seen to increase steadily due to the solar radiation pressure whereas the pitch and yaw motions oscillate with an amplitude of approximately 0.2° for a 100 m square thin aluminum plate in synchronous orbit. To control the shape and orientation of the plate two point actuators are assumed—one whose force axis is normal to the plane of the plate, the second with a force axis in the plane of the plate. The control law and the feedback gain values are obtained based on linear quadratic Gaussian methods. Transient responses and control requirements are simulated for local vertical and horizontal orientations.