GTD Terrain Reflection Model Applied to ILS Glide Scope

The capability of calculating the reflection of electromagnetic signals from uneven terrain has many applications. One of these is the determination of instrument landing system (ILS) glide slope performance. For this application the wavelength is approximately 1 m, incidence angles are usually near grazing, and the fields are horizontally polarized, so that gross irregularities such as dropoffs and hills are more important than surface roughness. Past approaches used to calculate the ground reflections for this application have been three-dimensional physical optics models which were very cumbersome and time consuming and which neglected important diffraction and shadowing phenomenon; a two-dimensional physical optics model which was faster than the three-dimensional models but ignored many shadowing and transverse terrain variation effects; and a half-plane diffraction model which is applicable only to a specified type of terrain geometry. In this paper a terrain reflection model based on the geometrical theory of diffraction (GTD) is described which can accommodate any piecewise linear terrain profile, requires less computer time than the physical optics models, is capable of including transverse terrain effects, and determines the reflected fields with all important diffraction and blockage effects included.     

The Effect of a Pulsed Interference Signal on an Adaptive Array

The performance of a least mean square (LMS) adaptive array in the presence of a pulsed interference signal is examined. It is shown that a pulsed interference signal has two effects. First, it causes the array to modulate the desired signal envelope (but not its phase). Second, it causes the array output signal-to-interferenceplus-noise ratio (SINR) to vary with time. The desired signal modulation is evaluated as a function of signal arrival angles, powers and interference pulse-repetition frequency (PRF) and pulsewidth. It is shown that the signal modulation is small except when the interference arrives close to the desired signal. To evaluate the effect of the time-varying SINR, it is assumed that the array is used in a differential phase-shift keyed (DPSK) communication system. It is shown that the SINR variation causes a noticeable but not disastrous increase in the bit error probability.     

Instrument Failure Detection in Partially Observable Systems

Instrument failure detection using the dedicated observer scheme (DOS) depends on partial state observability through each instrument which is monitored. For instrument fault detection by the DOS technique, a quantitative measure of partial state observability is established for each instrument and used to determine a necessary condition on the output structure of the system. This measure, called the internal redundancy of the instrument, indicates the complexity of the logic required for failure detection, and it also indicates where some hardware redundancy can be introduced into the system to improve the fault detection capability of the DOS. The principles developed are applied to a simulation of the pitch axis autopilot of the A7 jet aircraft.     

Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Design Rules for Adaptive Arrays

The concepts of "equivalent linear arrays" and "minimum effective spacing" can be used to simplify the analysis of planar adaptive arrays. The resulting design rules permit the rapid determination of array configurations without the need for computer modeling.     

State Estimation and Divergence Analysis

A growing memory discrete dynamic model for performing temporal extrapolations along a predetermined path in a random field is presented. This dynamic model is used to drive a linear system that is itself driven by discrete white noise. The coupled system is used to derive a state estimation scheme that recursively processes noisy measurements of the system. In addition, using the aforementioned dynamic model as a reference (truth) model, the authors develop a covariance analysis to measure the estimation errors that occur when the dynamics along the path through the field are modeled as a Markov linear model and state estimation is performed using discrete Kalman filtering. The performance evaluation of an inertial navigation system influenced by the Earth's gravity field aboard a maneuvering ship is provided as a specific illustrative example.     

Detection Loss of the Sample Matrix Inversion Technique

The sample matrix inversion (SMI) technique is used for Doppler and/or array processing. Previous analysis of the technique has been in terms of signal-to-interference plus noise ratio (SINR). For Gaussian statistics, this performance measure gives the same loss values as does a probability of detection analysis for linear-time invariant systems. It is often somewhat less valid for nonlinear or time variant systems. As SMI is a nonlinear technique, a probability of detection analysis has been performed. It is shown that the detection loss is larger than that computed by the SINR measure. It is also shown that though the loss predicted by the SINR measure only depends upon the number of measurements used to estimate the covariance matrix, the detection loss depends upon the false alarm probability and the number of adaptable elements in addition to the number of measurements.     

Exploration of the solar corona by high resolution solar decametric observations

In this review, current state of knowledge of high resolution observations at decameter wavelengths of the quiet Sun, the slowly varying component (SVC), type I to V bursts and noise storms is summarized. These observations have been interpreted to yield important physical parameters of the solar corona and the dynamical processes around 2R from the photosphere where transition from closed to open field lines takes places and the solar wind builds up. The decametric noise bursts have been classified into (i) BF type bursts which show variation of intensity with frequency and time and (ii) decametric type III bursts. The angular sizes of noise storm sources taking into account refraction and scattering effects are discussed. An attempt has been made to give phenomenology of all the known varieties of decametric bursts in this review. Available polarization information of decametric continuum and bursts has been summarized. Recent simultaneous satellite and ground-based observations of decametric solar bursts show that their intensities are deeply modulated by scintillations in the Earth's ionosphere. Salient features of various models and theories of the metric and decametric noise storms proposed so far are examined and a more satisfactory model is suggested which explains the BF type bursts as well as conventional noise storm bursts at decametric wavelengths invoking induced scattering process for 1 t conversion. Some suggestions for further solar decametric studies from the ground-based and satellite-borne experiments have been made.     

Initial results from the ISEE-1 and -2 plasma wave investigation

In this paper we present an initial survey of results from the plasma wave experiments on the ISEE-1 and -2 spacecraft which are in nearly identical orbits passing through the Earth's magnetosphere at radial distances out to about 22.5R_e. Essentially every crossing of the Earth's bow shock can be associated with an intense burst of electrostatic and whistler-mode turbulence at the shock, with substantial wave intensities in both the upstream and downstream regions. Usually the electric and magnetic field spectrum at the shock are quite similar for both spacecraft, although small differences in the detailed structure are sometimes apparent upstream and downstream of the shock, probably due to changes in the motion of the shock or propagation effects. Upstream of the shock emissions are often observed at both the fundamental, f_-^p, and second harmonic, 2f_p^-, of the electron plasma frequency. In the magnetosphere high resolution spectrograms of the electric field show an extremely complex distribution of plasma and radio emissions, with numerous resonance and cutoff effects. Electron density profiles can be obtained from emissions near the local electron plasma frequency. Comparisons of high resolution spectrograms of whistler-mode emissions such as chorus detected by the two spacecraft usually show a good overall similarity but marked differences in detailed structure on time scales less than one minute. Other types of locally generated waves, such as the (n+1/2)f_-^gelectron cyclotron waves, show a better correspondence between the two spacecraft. High resolution spectrograms of kilometric radio emissions are also presented which show an extremely complex frequency-time structure with many closely spaced narrow-band emissions.     

Design of a Correlator for Real-Time Video Comparisons

The problem of locating a reference image within a larger image using a correlation technique is discussed. Although the particular application discussed is that of locating a reference image obtained from one video sensor or a photograph, within the larger field of view obtained from a second video sensor in real time (i.e., at the TV field rate), the results are general and useful for a number of applications. The tradeoffs necessary to obtain real time correlat are discussed and their effect on correlation accuracy is given.