A solar type U burst in the decimetric range

This paper analyzes a Type U burst at 1.0 – 2.8 GHz which occurred between 12:36:26 – 12:36:32 UT on 1992 August 22, observed by Ond ejov Observatory, Czech Republic. This may be the first example of Type U bursts in the decimetric range, as far as we know. From analysis we came to the following conclusion: (1) The frequency drift rates of the ascending and descending branches are 1.25 and 0.225 GHz/s, respectively, and the velocities of the electron beam are 0.38 c and 0.26 c, respectively; (2) The burst decay of the ascending branch is larger than that of the descending branch; (3) The variations of the maximum frequencies of instantaneous spectra with time appear as from the highest (1.92 GHz) to the lowest (1.0 GHz), then toward higher frequency (1.53 GHz) (this is consistent with that predicted by plasma emission theory); (4) The bandwidths of the ascending branch are about twice that of the descending branch (this may be caused by the larger drift rates of the ascending branch); (5) The temperature of the coronal loop apex is 6.3 × 10⁶ K; (6) The magnetic field at the top of the loop is greater than 9.2 G; (7) This U burst emission is plasma radiation at the second harmonic.     

Electron flux variations at altitudes of 600–800 km in the second half of 2014. preliminary results of an experiment using RELEC equipment onboard the satellite <Emphasis Type="Italic">VERNOV</Emphasis>

The results of measurements of fluxes and spectra carried out using the RELEC (relativistic electrons) equipment onboard the VERNOV satellite in the second half of 2014 are presented. The VERNOV satellite was launched on July 8, 2014 in a sun-synchronous orbit with an altitude from 640 to 830 km and an inclination of 98.4°. Scientific information from the satellite was first received on July 20, 2014. The comparative analysis of electron fluxes using data from RELEC and using experimental data on the electron detection by satellites Elektro-L (positioned at a geostationary orbit) and Meteor-M no. 2 (positioned at a circular polar orbit at an altitude of about 800 km as the VERNOV satellite) will make it possible to study the spatial distribution pattern of energetic electrons in near-Earth space in more detail.     

Satellite dynamics under the influence of gravitational and aerodynamic torques. A study of stability of equilibrium positions

The dynamics of the rotational motion of a satellite, moving in the central Newtonian force field under the influence of gravitational and aerodynamic torques, is investigated. The paper proposes a method for determining all equilibrium positions (equilibrium orientations) of a satellite in the orbital coordinate system for specified values of aerodynamic torque and the major central moments of inertia; the sufficient conditions for their existence are obtained. For each equilibrium orientation the sufficient stability conditions are obtained using the generalized energy integral as the Lyapunov function. The detailed numerical analysis of the regions where the stability conditions of the equilibrium positions are satisfied is carried out depending on four dimensionless parameters of the problem. It is shown that, in the general case, the number of satellite’s equilibrium positions, for which the sufficient stability conditions are satisfied, varies from 4 to 2 with an increase in the value of the aerodynamic torque magnitude.     

Reducing Undesirable Effects in the Human Centrifuge

The human centrifuge is used to train pilots and astronauts for flights where they are subject to large accelerations. This paper deals with the problems of simulating such linear accelerations with a rotating device and presents suitable means of reducing undesirable simulation error. The advantages of using three gimbals rather than the usual two are considered. Numerical results illustrate the problems of simulation and the improvement achieved by the use of a third gimbal.     

Transformation of the Spectrum of a Signal in Communication between Relativistically Moving Inertial Frames

Future space exploration may involve communications between spacecraft moving at relativistic velocities. One of the significant problems associated with such communication is spectral distortion of signals which are propagated between relativistic frames. This distortion is generated by both changing propagation distances and purely relativistic electromagnetic field transformations. In this paper a linear integral transformation is formulated for relating the Fourier spectra of the source antenna excitation current and the resulting incident electric field at the receiving antenna. The kernel of the transformation is evaluated for the case of a steerable source antenna tracking on the advanced receiver position. The transformation is then applied to the case of an ideal thin-wire half-wave dipole source antenna excited by a narrowband, double-sideband modulated current. The specific distortions of spectral spreading and translation are then related to increased bandwidth and upper cutoff frequency requirements of receiving systems in relativistic applications.     

Dynamics of a Solenoidal-Torqued Gyro-Stabilized Seeker Assembly for Guidance and Tracking

Several low-cost gyro-stabilized, bang-bang seeker assemblies for missile guidance and tracking applications have used similar physical structures. A magnetic dipole is an integral part of the gyro rotor assembly. The nominal spin axis of the gyro is colinear with the axis of a cylinder about which is wound a helix of wire. By properly modulating the current that is passed through that helix, the precession torque acting upon the gyroscope is controlled. One rather generalized model of such a seeker assembly is modeled, the equations of motion are derived, and the dominant error sources are identified and parametrically evaluated. Because this is such a commonly encountered structure, yet no such analysis has been published, to the author's knowledge, it is hoped that this is a useful contribution to the literature.     

Dynamics of an Eddy-Current-Torqued Gyro-Stabilized Assembly

Prominent among the commonly encountered gyro-stabilized assemblies used in guidance and tracking are those which are eddy-current torqued. Although eddy-current-torquecd lead- computing gunsights, which use spinning mirrors, have been well known for thirty years, it has been difficult to find an analysis of the torques developed by the precession mechanism. In this paper a model configuration of the torquer is presented. The total gyro dynamics are then determined by including these torque terms in the model presented in the preceding paper.     

Identification of Aircraft Stability and Control Parameters Using Hierarchical State Estimation

Previous attempts to identify aircraft stability and control derivatives from flight test data, using three-degrees-of-freedom (3-DOF) longitudinal or lateral-directional perturbation equation-of-motion models, suffer from the disadvantage that the coupling between the longitudinal and lateral-directional dynamics has been ignored. In this paper, the identification of aircraft stability parameters is accomplished using a more accurate 6-DOF model which includes this coupling. Hierarchical system identification theory is used to reduce the computational effort involved. The 6-DOF system of equations is first decomposed into two 3-DOF subsystems, one for the longitudinal dynamics and the other for the lateral-directional dynamics. The two subsystem parameter identification processes are then coordinated in such a way that the overall system parameter identification problem is solved. Next, a six-subsystem decomposition is considered. Computational considerations and comparison with the unhierarchically structured problem are presented.