硼酸金属化合物的制备及其电催化活性

采用电化学沉积法于室温、碱性条件下在氧化铟锡(ITO,Indium Tin Oxide)表面制备了硼酸钴(CoBi)、硼酸镍(NiBi)、硼酸锰(MnBi)、硼酸铑(RhBi)、硼酸钯(PdBi)几种无定形的硼酸金属化合物薄膜,并对其形貌和结构进行表征,结果表明几种薄膜均为无定形结构.将这几种硼酸金属化合物应用于电化学催化水氧化制氧,对比其催化活性,发现CoBi,NiBi,RhBi具有较高的催化性能,而MnBi和PdBi催化活性较低.进一步研究硼酸pH值对CoBi电催化水分解的影响.发现硼酸有利于金属化合物的制备,pH7~11范围内,HBO₃^2-作为质子受体含量逐渐增大,能接受放氧过程产生的质子,促进催化水分解过程的进行.所得催化剂可自我修复,实现循环利用.     

基于小波变换的光纤周界定位系统

为提高基于双Mach-Zehnder干涉仪结构的光纤周界定位系统的定位精度,对信号频率范围及信噪比对系统定位精度的影响进行了理论分析和仿真研究.在此基础上,提出在选用光缆时需要兼顾对外界振动的敏感性和对外场复杂环境的适应性,以确保在长期可靠运行的前提下,扩展采集信号的频率范围;使用小波阈值降噪算法,提取振动信号的有效频率成分,滤除噪声,提高信噪比.最后进行了监测距离31 km的外场实验,验证了所选用光缆的优良性能和小波降噪算法的有效性.     

任意曲面上射线的寻迹方法

为计算任意曲面上天线间的隔离度,提出一种射线寻迹的新算法——最小夹角法.首先对任意曲面表面进行三角形网格剖分,并按照文中要求的格式生成模型表面网格数据;用文中提出的"最小夹角法"对上述网格数据进行处理,从而达到快速准确地找出任意曲面上、任意两点间的短程线.求解了位于圆柱体、椭球体及任意组合体上任意两点间的短程线长度,验证了"最小夹角法"的准确性.     

螺旋桨1P载荷飞行试验桨轴测试研究

采用应变法在发动机桨轴处直接测量了螺旋桨产生的1P载荷.介绍了测试方法、试验准备、载荷标定和飞行试验,通过飞行试验获得了不同飞行状态下桨轴1P载荷的分布.试飞结果表明,在功率状态接近的情况下,1P载荷与飞行姿态的关系最为密切.     

管式间接蒸发冷却器换热管的亲水性

对管式间接蒸发冷却器在应用过程中存在的换热管表面亲水性较差的问题进行分析,介绍亲水性的表征方法,分析亲水涂膜需要具备的性能,并详细介绍了三种亲水涂膜各自的特点及亲水机理。提出采用亲水溶液对铝箔表面进行亲水整理的方法来提高其亲水性,结果显示经过亲水处理后铝箔表面亲水性和持续亲水性都大大提高。     

斜流压气机扩压器设计和流场的数值模拟研究

以匹配某高增压比斜流叶轮为目标,设计了Z15、Z16和Z17三个扩压器方案,然后以斜流级（斜流叶轮＋扩压器）为研究对象,展开了三维粘性数值模拟研究,分析了不同方案扩压器的总体性能以及内部流场结构。研究结果表明,设计方案满足匹配斜流叶轮的目标,三种方案的整级最大绝热效率均超过82％,最大总压比超过5．6,大多数工况点的静压恢复系数大于0．6,总压恢复系数大于0．92。其中．Z16方案气动性能最优。     

天问一号探测器高动态着陆惯导系统设计与试验

考虑到火星探测任务着陆过程动态变化大,稀薄大气环境下开伞会对探测器产生剧烈晃动,为此天问一号探测器研制了一套高动态着陆惯导系统,从硬件产品、使用时序到导航算法方面均进行了针对性设计,以适应着陆过程中的高动态环境.此外,为验证天问一号探测器高动态着陆惯导系统的性能,设计了模拟火星开伞工况的火箭弹高空开伞试验,结果表明该高...     

Recent Developments on Damage and Fracture of Thin-Walled Complex Components Produced by Spinning

The spinning technique has been widely used in the manufacture of aerospace thin-walled axisymmetric components because of its excellent formability. Damage and fracture, as the important defects that often occur and must be avoided in the forming and service stages of components, have attracted much attention of researchers. In this paper, the fracture behavior and laws of spinning components such as conical parts, tubular parts, and components with inner ribs are summarized, the typical coupled and uncoupled ductile fracture models are introduced, and their applications in spinning are analyzed. Meanwhile, the recent developments on the modified ductile fracture model in analyzing damage and fracture mechanisms of spinning are emphatically introduced. The results could provide guidance for the selection and establishment of appropriate ductile fracture models in the finite element simulation for the accurate prediction and analysis of fracture moment, location, form, damage mechanism, and evolution law, and help the development of precision spinning techniques for high-performance thin-walled complex components.     

基于模糊单神经元PID的车载发射装置随动控制策略研究

对于车载防空武器系统而言,往往需要随动系统快速、高精度地跟踪目标,跟踪效果的优劣直接影响到武器系统作战效能的发挥。为提高随动装置的快速性和精度,提出一种将单神经元与模糊PID控制相结合的位置随动控制策略,应用机理分析和实验结合的方法建立随动系统数学模型,并运用Matlab中的Simulink进行仿真。仿真结果表明:所提出的随动控制策略,可以显著提高发射装置的静态、动态跟踪性能,验证了该随动控制策略的可行性。     

不确定条件下采用协方差描述函数法的再入轨迹鲁棒优化

Uncertainties are taken into account in reentry trajectory optimization and a robust trajectory optimization model is constructed based on the robust optimization theory. There are computational difficulties in solving this robust trajectory optimization problem due to the random variables associated with the uncertainties. To overcome these difficulties, the covariance analysis describing function technique (CADET) is employed to convert the robust trajectory optimization model into an equivalent deterministic trajectory optimization formulation, which is then solvable by using the existing pseudo spectral method. In the case study, a robust reentry trajectory optimization problem considering the uncertainties of aerodynamic parameters is solved to obtain the robust optimal trajectories. By comparing with the traditional deterministic optimal trajectories, the robust optimal trajectories are significantly less sensitive to the uncertainties of aerodynamic parameters, showing the effectiveness of the presented method.