稀土金属配合物的发光性能研究进展

稀土元素由于含有f电子而使得稀土金属配合物具有许多独特的物理和化学性质，尤其是优良的发光性能。本文介绍了稀土金属配合物的光致发光和电致发光以及近年来国内外在该方面的最新研究进展。     

航天用35Ah氢镍电池组性能

简要介绍了电池组的构成以及电池组空间力学环境测试条件和模拟GEO试验制度。在电池组性能方面 ,比较了第 1阴影期中间和第 36阴影期中间 79%DOD的放电特点 ,概要介绍了充放电温度特性 ,容量与氢压的变化关系 ;特别在寿命特性方面 ,着重阐述了电池组在模拟GEO ,79%DOD下 40个阴影期间最大放电深度时终止电压变化特性 ,电池组容量变化以及第 3阴影期和第 36阴影期放电终止电压变化情况。还列出了电池组的主要技术性能指标。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

基于MEMS的微槽冷却系统在微纳卫星热控中的应用

介绍了基于微机电一体化系统(MEMS)的微槽冷却系统的研究成果。分析了将微槽冷却系统用于微纳卫星热控设计时的特殊要求。讨论了表征微槽冷却系统性能的水力学系统和传热性能。理论分析和数值模拟结果表明,微槽冷却系统可使大热流密度的热源芯片温度维持在较低的范围内,能满足微纳卫星热控的要求。研究认为,压降和热阻均较小的深槽可在小泵功率时提供较优的传热性能。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

锥体目标空间进动特性分析及其参数提取

空间进动是弹道导弹中段飞行过程中锥体目标特有的运动特性，本文首先建立了锥体目标空间进动数学模型，给出了姿态角与空间进动参数的关系式，并利用进动参数获取了反映目标质量分布特性的惯量比。然后通过对目标RCS回波数据进行多项式拟合，估计进动参数，以此为雷达目标识别提供新的技术思路。仿真实验结果表明本文提出的算法能够有效估计出目标的进动角。     

肼类燃料蒸汽污染控制技术

针对肼类燃料在使用中产生的蒸汽会对大气造成污染这一问题 ,介绍了肼类推进剂气体污染控制方法。这些方法主要有洗涤吸收法、气体扩散法、焚烧法、活性炭吸附法、催化法、喷雾法、冷却法、泡沫覆盖法、固体粉末消污法等。论述了国内外肼类气体污染控制的各种技术 ,并对各种技术特点进行了对比与分析