Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Everyman's Doppler Satellite Navigation System

This paper describes a system of navigation by measurement of the Doppler shift in the radio transmissions from a near-Earth satellite, and simple equipment for making the measurements. It also shows that the current information which is needed by the navigator can be reduced to a number containing six decimal digits. Finally, it shows that the computations needed for the navigator to obtain a fix can be performed witlh the aid of tables that can be prepared at least 18 months in advance. Using these tables and a simple slide rule, but no other computational aids, a fix accurate to about 500 meters can be obtained in about 10 minutes. More accuracy can be obtained at the expense of time, or time can be saved at the expense of accuracy.     

Spectra and time variability of GX 5-1

From a short observation of GX 5-1 with EXOSAT we have derived information on spectral and temporal behaviour in the energy range 1–20 keV. The source was found to be variable on time scales from 10 s to 1 h. Describing the spectrum one is forced to assume at least two spectral components. The best fit is reached using a spectrum composed of two blackbody functions with typical temperatures 1 keV and 2 keV, corresponding to apparent blackbody radii of 43 km and 11 km, respectively (for a distance of 10 kpc). With respect to the hot component there is evidence for variability in temperature as well as in apparent blackbody radius. No periodic variability has been found over the period range 0.25 s to 2000 s. There is no evidence for an iron emission line.     

Susceptibility of DS/FH,M, Binary DPSK to Partial and Full Band Barrage Jamming

Spread spectrum signaling schemes have been proposed to counter unfriendly, electrical jamming threats. In order to establish their effectiveness, such schemes must be analyzed. This work takes a step in this direction by developing the susceptibility equation, or equivalently, the probability of error, of a direct sequence/frequency hopped (DS/FH), binary differential phase-shift keying (DPSK) system when subjected to a barrage jamming signal. Specific system models are established for the receiving system as well as for the jamming signal and the spread spectrum techniques. Both partial and full band jamming strategies are considered. Graphical results are presented with the conclusions summarizing the spread spectrum effectiveness and the deficiencies of the FH processing gain definition.     

Design of the HEAO Main Bus Shunt Regulator

The High Energy Astronomy Observatory (HEAO) main bus regulator contains a redundant error amplifier (REA) and a 12-section sequenced shunt transconductance amplifier (STA) in which not more than three and not less than one shunt section are in an active control mode regardless of a failure in any one of the twelve sections. The part of the work concerned with the shaping of the frequency response of the REA and STA minor feedback loops and of the teolator major feedback loop is described. Emphasis is on the application of a general design technique embodying a "design-analyze-measure iteration loop," in which a first-cut design and analysis is corrected ard improved after experimental observation of discrepancies and deficiencies. In particular, an incipient high-frequency oscillation was thereby reliably eliminated. It is demonstrated that analysis techniques involving a minimum of algebra can provide full quantitative information on an efficient and reliable system design.     

Random Characteristics of the Type II Phase-Locked Loop

The results of a study of the characteristics of the second-order Type II phase-locked loop with a Gaussian noise input, and obtained by digital computer simulation, are presented. The digital simulation is described and the random state variables are defined such that their characteristics can be interpreted in terms of existing phase portraits of autonomous phase-locked loops. The statistics associated with the state variables, which are phase error and a measure of frequency error, and those associated with the number of cycles skipped and the mean time to unlock, are given.     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

Gravity Sensors and the Principle of Equivalence

The tensor characteristics of the inertial fields created by acceleration and rotation, and the gravitational fields created by masses are discussed. Although it is sometimes thought that it is impossible to distinguish between gravitational and inertial effects because of Einstein's principle of equivalence, these effects do have different, detectable tensor characteristics. The principle of equivalence is only strictly applicable at a point, while the instruments to measure these tensor fields exist over a finite region. The inertial field created by acceleration is a uniform vector field and has no gradients, while the inertial field created by rotation has a uniform cylindrically symmetric tensor gradient but none of higher order. The gravitational field created by a mass is highly nonuniform with essentially no limit to the number of higher order gradients. These differences make it theoretically possible to independently measure gravitation, rotation, and acceleration effects; to do so, some form of differential force sensor with tensor response characteristics must be used. The standard technique is static, using differential accelerometers to sense the spatial gradient characteristics of the fields. A more promising technique is dynamic; by rotation of the differential sensor, the static spatial variations are transformed into temporal variations with various frequency components. It is then possible to distinguish between the various fields by frequency filtering.     

Role of BIT in support system maintenance and availability

The role of built in test (BIT) in electronic systems has grown in prominence with the advances in system complexity and concern over maintenance lifecycle costs of large systems. In an environment where standards drive system designs (and provide an avenue for focused advancement in technology), standards for BIT are very much in an evolutionary state. The reasons for advancing the effectiveness of BIT include reduced support overhead, greater, confidence in operation, and increased system availability. The cost of supporting military electronic systems (avionics, communications, and weapons systems) has driven much of the development in BIT technology. But what about the systems that support these end items that contain test and measurement instrumentation - such as automatic test equipment (ATE), simulators and avionics development suites? There has also been a beneficial effect on the maintenance and availability of these systems due to the infusion of BIT into their component assemblies. But the effect has been much more sporadic and fragmented. This paper looks at the state of BIT in test and measurement instruments, explain its affect on system readiness, and present ideas on how to improve BIT technologies and standards. This will not provide definitive answers to BIT development questions, since the factors that affect it are specific to the instrument itself. The topics covered in this paper are: definitions of built-in test, instrument BIT history, importance of BIT fault coverage and isolation in support systems, overview of BIT development process issues that limit the effectiveness of BIT Standards related to instrument BIT, making BIT more effective in support system maintenance and availability and conclusions.