Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

ESA's Biopan 1--"Vitamin" experiment preliminary results

The purpose of “Vitamin” experiment is to study the efficiency of protective substances on three biological acellular systems aqueous solutions exposed to cosmic radiation in space. The first system “LDL”is a low density lipoprotein. The second is “E2-TeBG complexe” in which estradiol (E2) is bound to its plasmatic carrier protein, testosterone-estradiol binding globulin (TeBG). The third is “pBR 322”, a plasmid. “Vitamin” experiment was accomodated in the Biopan which had been mounted on the outer surface of a Foton retrievable satellite. The experiment was exposed to space environment during 15 days. A stable temperature of about 20 °C was maintained throughout the flight. “Vitamin” experiment preliminary results are presented and discussed.     

费用-效果分析在空间运输决策支持系统中的应用

低成本空间运输对保证正常扩大利用空间以及维持所需的地面/空间基地后勤支援是非常重要的.介绍了如何建立空间运输决策支持系统.重点介绍如何在该系统中采用费用-效果分析技术和分析程序.其目的是要提供一种计算机化的决策支持系统,使用户能按费用、进度和技术参数等来组成和评审空间运输系统结构.这种系统和用户有很强的交互作用性,能允许用户针对相同的和在变化中的判据来评审/比较多种空间运输系统方案.     

MX第一级

1980年在 Montery 召开的 JANNAF 会议上,介绍了 MX 第一级原始方案论证及制订的研制方案。这篇新资料评论了最初的两次静态试验所取得的结果。     

Loading effects on rat craniomandibular morphology: a system for gravity studies

Gravity effects on muscle and bone are a major impediment to long-term space travel. We introduce a model for studying these effects, the craniomandibular system. Some advantages of this system include: (1) craniomandibular morphology is determined by epigenetic factors including gravity, (2) relatively light forces can significantly alter its morphology, and (3) soft diet and tooth loss produce effects that are similar to those produced in lower limbs by weightlessness. In the study, implants made either of gold (experimental group) or lightweight acrylic (controls) were attached to adult rats' mandibles. After 13 weeks, the animals' skulls and mandibles were dissected. Pair-wise comparisons indicated that the experimental animals showed significantly shortened and narrowed cranial bases, and significant changes in the posterior zygomatic arch region. These results indicate that simulated macrogravity influences bone remodeling in the adult craniomandibular system.     

一种卫星上的容错数字控制计算机

卫星控制系统用的数字计算机是实时性能很强的控制机,又是信息量较大的数据处理机,同时要求可靠性极高。一般,星载计算机设计成一台双机热备份的容错计算机系统。文章介绍了星载计算机的元器件选择,主机构成及其性能,各种系统软件和应用软件的设计准则,以及整机测试方法等。着重介绍了星载计算机硬件和软件的容错设计。文章最后介绍了星载计算机的使用情况,星载计算机成功地完成了二次飞行试验任务,表明设计思想正确,满足总体技术要求,控制精度高。采用双机热备份系统确实保证了计算机的高可靠性要求。     

螺栓挤压推力终止系统验证试验

本文总结了螺栓挤压推力终止系统(BETTS)的设计、研制和验证试验。该系统在阿诺德工程研制中心(AEDC)进行了多次冷试,一次海平面热试和两次高空点火推力终止试验,试验所用的发动机是政府向化学系统分公司提供的“民兵”发动机空壳体装药后制成的。通过大发动机热试,证明本计划所验证的这种BETTS可以消除前部碎片,大大地简化药柱和发动机壳体的设计,提高末级性能。另外,这种方法设计简单,从而可以降低推进系统的成本。BETTS用爆炸螺栓和挤压螺栓的组合代替连接喷管法兰和发动机壳体法兰的普通螺栓。接到指令后,爆炸螺栓立即打开,喷管循着挤压螺栓向后平移,发动机气体迅速排出,从而使推进剂熄火。挤压螺栓控制着喷管的移动速度和最大运动行程。以前根据NO.F04611—75—C—0044合同(CSD计划2549)曾成功地在缩比发动机上进行了BETTS热试和在飞行重量的“民兵”Ⅲ第三级发动机上进行了冷试。     

HTPB推进剂的老化及使用寿命

为了进行老化评价研究,选择和研制了三种不同固体含量的(88～91%)端羟基聚丁二烯(HTPB)推进剂。已经证实,88%固体含量的HTPB推进剂符合以前提出的老化模型。这种老化模型已成功地进一步用于较高固体含量的推进剂以及其它计划用的HTPB推进剂的实测力学性能老化数据。采用这种老化模型,根据加速热老化试验数据予测了长期力学性能,予测数据与六年实测老化数据相当一致。利用予测的推进剂破坏性能,结合火箭发动机的要求,来确定予先选定安全裕度的发动机药柱的使用寿命。本文列出了各种复合推进剂老化速率的比较数据。根据老化结果的分析,提出了一个宽范围老化行为的数学表达式。     

大气湍流光学长曝光像的数值计算

在介绍大气湍流光学长曝光像的两个模型——高斯模型(空间域模型)和统计平均光学传递函数模型(空间频率域模型)的基础上，推导两模型之间的关系与差别，并应用两模型数值计算了扩展目标通过大气的长曝光成像结果。此外，还应用高斯模型给出了自适应光学系统校正后的远场光斑。     

The Suess-Urey mission (return of solar matter to Earth)

The Suess-Urey (S-U) mission has been proposed as a NASA Discovery mission to return samples of matter from the Sun to the Earth for isotopic and chemical analyses in terrestrial laboratories to provide a major improvement in our knowledge of the average chemical and isotopic composition of the solar system. The S-U spacecraft and sample return capsule will be placed in a halo orbit around the L1 Sun-Earth libration point for two years to collect solar wind ions which implant into large passive collectors made of ultra-pure materials. Constant Spacecraft-Sun-Earth geometries enable simple spin stabilized attitude control, simple passive thermal control, and a fixed medium gain antenna. Low data requirements and the safety of a Sun-pointed spinner, result in extremely low mission operations costs.