Combination probe for hi-frequency unsteady aerodynamicmeasurements

A combination probe for time-resolved measurements of unsteady compressible flows in transonic wind tunnels is described. The probe measures stagnation (total) temperature and pressure, static pressure, and flow angles in two planes. From these, the fluctuating mass flux, Mach number, and velocity, as well as their components in three directions, can be deduced. The combination probe consists of a dual hot-wire aspirating temperature and pressure probe mounted piggyback with a high-frequency angle probe. The angle probe has four surface-mounted silicon pressure sensors. A scheme for retrieving from the four pressure signals the stagnation and static pressures. Mach number, and flow angles in two planes, is described. The calibrations forming the base for this procedure, obtained from steady-state tests, are given. Typical data obtained in the Karman vortex street shed from a cylinder and at the exit of a Mach 0.4 air jet are presented     

Airborne hyperspectral sensor systems

This paper presents brief profiles of 19 airborne hyperspectral sensor systems currently or nearly available for data acquisition. These systems represent various design concepts and innovations in hyperspectral information collection technology. A number of companies now have the ability to acquire data from these systems. As the scientific and commercial communities become aware of hyperspectral imaging data acquisition opportunities, more applications for this type of data will be investigated and implemented     

Progress in the study of homologous flares on the sun — Part II

Studies of groups of homologous flares in active regions in 1980 have been made using a variety of space and ground based instruments. Detailed properties of three of these groups have been studied, and are combined to form a possible sequence of events.     

A chirp scaling approach for processing squint mode SAR data

Image formation from squint mode synthetic aperture radar (SAR) is limited by image degradations caused by neglecting the range-variant filtering required by secondary range compression (SRC). Introduced here is a nonlinear FM chirp scaling, an extension of the chirp scaling algorithm, as an efficient and accurate approach to range variant SRC. Two methods of implementing the approach are described. The nonlinear FM filtering method is more accurate but adds a filtering step to the chirp scaling algorithm, although the extra computation is less than that of a time domain residual compression filter. The nonlinear FM pulse method consists of changing the phase modulation of the transmitted pulse, thus avoiding an increase in computation. Simulations show both methods significantly improve resolution width and sidelobe level, compared with existing SAR processors for squint angles above 10 deg for L-band and 20 deg for C-band     

Bistatic RCS of Complex Objects near Forward Scatter

A technique is presented for predicting the bistatic radar cross section (RCS) of an opaque, arbitrarily shaped object at angles near forward scatter. Babinet's principle is employed to approximate the object's scattering pattern as the two-dimensional Fourier transform of its silhouette. Calculations for spheres and right-circular cylinders are shown to agree with predictions based on exact Mie theory, method of moments, and physical optics. Restrictions on the applicability of the method are presented.     

EXOSAT spectra of some bright QSO's

This paper reports on EXOSAT observations of four bright QSO's and active galaxies. The QSO PHL 1657 has a simple spectrum that can be fit with power law plus some low energy absorption. A soft excess is observed for both MR 2251 and E 1352.24+1830. Finally, PKS 2126-158 was detected and the results are consistent with a 0.7 energy index.     

Optimal Design Strategy of Switching Converters Employing Current in jected Control

This paper analyzes a buck/boost regulator employing current-injected control (CIC). It reveals the complex interactions between the dc loop and the current-injected loop and underlines the fundamental principle that governs the loop gain determination. Three commonly used compensation techniques are compared. The integral and lead/lag compensation are shown to be most desirable for performance optimization and stability.     

Comet Halley: Nucleus and jets (results of the VEGA mission)

The VEGA-1 and VEGA-2 spacecraft made their closest approach to Comet Halley on 6 and 9 March, respectively. In this paper those results of the onboard imaging experiment which were obtained around closest approach are discussed. The nucleus of the comet was clearly identifiable as an irregularly shaped object, with overall dimensions of (16±1)×(8±1)×(8±1) km. The nucleus rotates in the prograde sense about an axis nearly perpendicular to the orbital plane with a period of 53±2 hours. Its albedo is only $\text{0.04±}\text{0.02}\text{0.01}$ Many of the jet features observed during the second fly-by have been spatially reconstructed. Their sources form a quasi-linear structure on the surface. The dust above the surface is shown to be generally optically thin with the exception of certain specific dust jets. Brightness features on the surface are clearly seen. Correlating our data with other measurements, we conclude that the dirty snow-ball model will probably need to be revised.     

Low-harmonic three-phase inverters with nonpulsating terminalcurrents

A basic class of three-phase inverters with nonpulsating terminal currents, namely, the four-topology four-inductor four-capacitor class is derived and studied. The expressions of duty-ratios required for low-harmonic dc-to-three-phase-ac conversion, ranges of output voltage variation, and component stresses for given specifications of inverters are derived. The characteristics of inverters include low-harmonic power conversion, low component stresses, variable-frequency variable-amplitude output voltages of values both below and above the dc input value, and the use of minimum number of inductors to achieve nonpulsating terminal currents