Megahertz power converters for specific power systems

Some of the problems in the development of pulsewidth power converters when the switching frequency is increased from hundreds of kilohertz to tens of megahertz are highlighted. The major goal is the establishment of a ten megahertz power chain designed to operate in a distributed system from a DC power bus of 24 to 48 V. Available components and materials are discussed, and possible topologies-flyback, forward, push-pull forward, and buck converters-are examined. The performance criteria chosen for this analysis are, in the order of preference, output requirements, size and weight, efficiency, and cost     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

An advanced flight control and navigation system implementation fortactical helicopters

US Army helicopters that will allow single-crewmember operability in tactical environments require a high degree of automation. A tightly integrated flight control and navigation system has been studied. An architecture is discussed which meets anticipated flight control and navigation requirements, at an acceptable weight, using techniques of functional and physical integration. The architecture maximizes the sharing of sensor and computational resources in a flight critical environment and uses modular equipment packaging, dual fault-tolerant tetrad ring-laser-gyro inertial measurement units, and triplex self-checking processor pair-based flight critical processing channels     

Thermoluminescent dose measurements on-board Salyut type orbital stations.

A small, vibration- and shock-resistant thermoluminescent dosemeter /TLD/ system--named PILLE--was developed at the Health Physics Department of the Central Research Institute for Physics, Budapest, to measure the cosmic radiation dose on board orbital stations. The first on-board measurements with this system were performed /by B. Farkas, the Hungarian astronaut/, on the Salyut-6 space station in 1980. The same instrument was used by other crews in the following years. Doses measured at different sites in Salyut-6 are presented. The dose rates varied from 0.07 to 0.11 mGy.day-1. After the first cosmic measurements, the system was further developed. The minimum detectable dose of the new TLD system is 1 microGy, i.e. less by on order of magnitude than that of the former system. The self-irradiation dose rate of the TLD bulbs is also reduced--by more than one order of magnitude--to 10 nGy.h-1, by the use of potassium-free glass for the bulb envelope. This new type of PILLE TLD system is currently on-board Salyut-7. The dose rates /0.12-0.23 mGy.day-1/ measured in 1983 are presented in detail.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

International trends in Stirling engine technology development:ISEC 1982-8

A brief survey is presented of trends in work reported at four International Stirling Engine Conferences held during the 1980s. The discussion covers international participation, publication sources and types, engine types, specialized engines, sponsoring institutions and observed trends     

Cockpits for 2010 and Beyond

Truly optimal weapon system performance is highly dependent on the level of man-machine cockpit integration resulting from the intelligent application of crew station technologies. Future cockpits will incorporate a wide range of enhancements. Heavy application of artificial intelligence techniques can be expected to encompass the entire spectrum of crew station technologies; from data fusion, to optimized display resource management, to real-time onboard maintenance and fault reporting, and even to the optimization of pilot physiological needs. Emphasis on exploiting applications of the ultimate human resource, the mind, can be expected through the use of biocybernetics; initially to control previously manual and/or automated cockpit functions, and eventually to allow bidirectional communications. Future enhancements can also be expected to improve aircrew performance by allowing the pilot to take full advantage of aircraft maneuvering capability, and to operate effectively in hostile chemical, biological and radiological environments. New high resolution, full color, three dimensional crew station display devices will complement enlarged sensor suites and enhance aircrew situational awareness. Does the pilot really need to see the outside world to fly and fight effectively? Or, can panoramic display techniques, in an encapsulated environment, coupled with 4? steradian sensor coverage, increase performance? This paper strives to illustrate some ``no holds barred' approaches to making future fighter cockpits an ``in-tune' extension of the operator, based on current and projected tactical needs.     

Strapdown inertial measurement units for motion compensation forsynthetic aperture radars

It is shown that synthetic-aperture radar (SAR) motion can be compensated by using an antenna-mounted strapdown inertial measurement unit (IMU) as the motion sensing system, but sensor and system errors affect SAR image quality. A strapdown IMU consists of three accelerator channels and three gyro channels. Strapdown IMU errors include gyro-scale and accelerometer-scale factor and bias errors, velocity error, platform tilt, and errors induced by limited inertial sensor bandwidth. The effects of these errors on the SAR image quality are presented in terms of the SAR impulse response. IMU errors that cause low-frequency phase errors (less than one cycle per array time) are categorized in terms of quadratic and cubic phase errors. IMU errors that cause high-frequency phase errors (greater than one cycle per array time) are categorized in terms of the integrated sidelobe ratio and peak sidelobe ratio. A motion compensation system conceptualization is described wherein a strapdown IMU is attached to an antenna and transfer-aligns to the aircraft's master navigator     

Confirmation of gravisensitivity in the slime mold physarum polycephalum under near weightlessness

We have investigated Physarum polycephalum, a unicellular organism with no special gravity receptors, on its ability to react to gravity. The first experiments were 0 g-simulation experiments on the fast-rotating clinostat conducted with plasmodial strands of this acellular slime mold. In these earth-bound experiments the observed parameters were periodicity of the contractions and dilatations of the strand's ectoplasm as well as the periodicity and velocity of the striking cytoplasmic (endoplasmic) shuttle streaming. During 0 g-simulation these parameters showed significant changes indicating the existence of a gravisensitivity of the slime mold.

The Space-Shuttle experiment (ESA-Biorack in D 1-Mission) should demonstrate the validity of the 0 g-simulation on the fast-rotating clinostat. The experiment was designed in a way enabling the registration of the same parameters as on the clinostat (using the light microscope in combination with a photo diode and a cinecamera). Only one of the two planned measurement sessions was fully successful and provided us with data confirming the results gained on the fast-rotating clinostat: The slime mold showed under real near weightlessness in the D 1-Space Shuttle Mission a transient frequency increase in its contraction rhythmicity and a (steady) increase in the streaming velocity of its endoplasm.