Forming and keeping fast fly-around under constant thrust

A new switching control algorithm under constant thrust is designed for the chaser fast flying around the target spacecraft along a specified fly-around trajectory. The switching control laws are obtained based on the acceleration sequences and the on time of thrusters which can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters. Furthermore, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target fly-around positions are calculated through the isochronous interpolation method. The change of the relative position and the relative velocity of the chaser during the constant thrust fast fly-around are presented through simulation example. It is proved that, with the switching control laws, the chaser will fast fly around the target spacecraft along the specified fly-around trajectory.     

风险价值法VaR在产品质量风险管理中的应用

随着经济体制改革的深化，为新兴企业带来新的发展机遇，同时也给企业发展带来新的风险，对风险进行有效的管理，是企业生存发展之本。本文对风险衡量方法中的风险价值VaR法进行了简单阐述，以某机械加工厂的曲轴和连杆质量风险管理为例，根据其质量问题引发的赔偿数据建立风险量化模型，推导出企业在一段时间内的预期损失，据此可以调整风险管理的措施，做到利润最大化。     

基于循环平稳性的噪声调频干扰高分辨测向方法

根据噪声调频信号循环平稳特性分析,提出了基于阵列接收信号循环均值-空域处理的波达方向(DOA)估计算法。仿真结果表明:该算法的角度估计性能明显高于比幅比相单脉冲测角法,且在高信噪比环境中,该法的估计性能更好、运算量较小。     

基于实用参数控制的翼型参数化方法

在翼型的优化设计中,通常要对二元翼型进行参数化方法表示,其目标是利用较少的参数得到足够大的设计空间。分析了Hicks-Henne型函数叠加法和PARSEC几何参数法的特点和不足,提出了利用厚度、弯度等实用参数进行翼型定义的方法,该方法可以通过厚度和弯度参数更加直观地理解翼型轮廓和翼型基本气动性能。通过分析3种方法对5种翼型的最小二乘拟合结果得出结论:实用参数法的误差分布比较平均,且能够比另外两种方法更精确地表示翼型。     

大跨斜拉桥主梁断面气动导纳的实测研究

以苏通大桥为研究背景,通过专门研制的一套测压装置,利用测压法对苏通大桥主梁断面气动导纳进行了现场实测研究,并将现场实测结果与风洞实验结果及Sears函数进行了对比研究。结果表明:现场实测结果与风洞实验结果接近,与Sears函数有交叉,在低频范围内远小于Sears函数,在高频范围内逐渐与Sears函数靠拢,表明对于气动导纳来说,风洞实验结果是可靠的,且传统上利用Sears函数代替气动导纳函数进行桥梁结构抖振响应分析时得出的结果将过于保守,因此,对大跨桥梁进行抖振响应分析时,应针对气动导纳函数进行专门的实验研究。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

铝合金含硅量的测定方法

Ｎ２Ｏ－Ｃ２Ｈ２原子吸收光谱法测定卫星系统电池外壳铝合金中的硅含量。讨论了燃烧器高度、燃助比、共振线等测定条件的选择方法，以及酸度、温度和Ｎ２Ｏ－Ｃ２Ｈ２火焰区对测定精度的影响。实际应用证明，该方法灵敏度高，干扰小，选择性和重复性好，并具有操作简便，易掌握，分析周期短等特点；精密度和准确度均能满足卫星系统电池外壳体研制的要求。     

空间运输飞行器材料与制造技术需求分析

空间运输飞行器已经成为国际航天技术新的发展趋势,对材料和制造技术从两方面提出了新的需求:异形贮箱制造技术和热控材料与制造技术。本文对这两个问题进行了分析,结果表明:异形贮箱和热控硬件的材料与制造是制约空间运输飞行器发展的基础技术,必须在空间运输飞行器研制热潮之前先期突破。     

计算机在光栅和线纹检测中的应用

介绍了一个将PC机和8031单片机组成的计算机系统应用于光栅尺、线纹尺检测的实例。