上游转子对下游静子叶片气动力的影响

为研究轴流压气机下游静子叶片非定常气动力的大小和频率的变化规律,采用在静子叶片表面埋设微型动态压力传感器的方法,在低速单级轴流压气机实验器上进行了静子叶片表面压力的测量。测量了不同轴向间距、不同转速下从近堵塞到近失速的宽广流量范围,并对所测得的静子叶片非定常气动力进行了离散傅立叶变换,以分析其频谱特性。实验结果表明：在转子尾迹的影响下,静子叶片表面的波动频率是转子的尾迹频率及其倍频。转子尾迹频率的高频分量对静子叶片吸力面前缘的影响比对其他位置的影响大。叶片表面的非定常压力和气动力随压气机流量、转速和轴向间距的变化而变化。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

仅用作航空器追踪的北斗机载设备适航要求分析

北斗卫星导航系统（简称北斗）在民用航空器中安装应用的前提是明确和符合北斗机载设备的适航要求。但由于全球定位系统（GPS）与北斗在星座结构、信号体制及功能上的不同，导致目前国际上全球卫星导航系统（GNSS）相关适航标准不适用于北斗设备。标准的缺失严重制约北斗民航产业发展，急需进行自主研究与制定。针对北斗在民用航空器中应用第一阶段的功能及场景，即仅用作航空器追踪，分析当前可参考标准的适用性，明确适航要求的制订策略及框架，综合考虑适航安全性、民航对北斗机载设备的紧迫需求，未来机载设备的发展方向，以及当前工业水平，提出一套仅用作航空器追踪的北斗机载设备适航要求，形成审定要素及评审要求，可支持工业方对适航标准的理解。     

基于图像处理的液位测量技术研究现状与发展趋势

基于图像处理的液位测量技术具有非接触式测量、应用范围广、占用体积小等突出优势,在工业、化学以及水文监测等领域有着广阔的应用和发展前景。随着图像处理算法的改进和工业相机性能的提升,图像液位测量技术的各项性能指标也得到了显著提高。为进一步研究基于图像处理的液位测量技术,梳理其基本工作原理、分类及研究现状,并分析发展趋势和前景,为研究精度更高、应用更广的液位测量技术提供依据。     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

静态解耦控制与常规控制的兼容性

静态解耦控制和常规控制之间的兼容性，与常规控制系统的组成和功能有密切的关系。因此，以ＹＦ－１６ＣＣＶ飞机为例，对兼容性问题进行了计算、分析和讨论。计算结果表明，采用静态补偿和闭环修正方法，不但可以实现两种控制之间的兼容，而且还可以提高静态解耦控制的准确度。     

气垫支承特性分析

运用气垫支承技术进行重物运输是一种新型的物料搬运方法，它具有摩擦力小，机动灵活的优点，尤其适用于大型，精密装置的搬运，气垫支承技术的关键部件是柔性气垫单元，它在工作中的受力，变形是比较复杂的，本文采用联立求解雷诺方程和弹性元件变形方程的方法，对柔性气垫单元的受力，压力分布，变形及应力进行了计算，计算结果与实测数据基本一致，最后，讨论了结构参数对气垫性能的影响，可以作为气垫单元结构设计的参考。     

航空工业技术进步的经济效益分析

运用非中性技术进步模型对航空工业1954年～1988年的技术进步与经济增长情况进行了定量研究,所得结论是:在航空工业35年的发展过程中,劳动投入增长对产出增长的贡献是第一位的,其次是技术进步增长,最后是资本投入增长。文章最后对我国航空工业的技术进步与经济增长政策提出两点建议。