The X-ray background 2–50 kev: A superposition of known sources,or evidence of a new component?

The contribution of the canonical Quasars to the XRB 2–50 keV is not likely to exceed 50%. Nay, consideration of X-ray selection effects results in a further reduction of the value of sensible estimators for the intensity ratio L_X/L_O; in addition, recent counts of radioloud and radio-quiet Quasars definitely limit the number of faint sources. A missing component with definite spectral properties should comprise a sizeable fraction of the XRB.     

The waves observed in the ARAKS-East experiment

Experimental results of the Wave measurements over frequency range 0.1–5.0 MHz during the second launch of the ARAKS Experiment (15.02.75) are reported. The differences between the results of the first and the second launches are discussed.     

Research on Biolab, a multi-user facility for APM

A study carried out by a team of seven scientists appointed by ESA resulted in the design of a biological laboratory "Biolab" for Columbus APM. The basis for the study were four pre-Phase A studies performed by industry on the assumption that 15 racks would be available to biology and biotechnology in the APM. Due to the constraints newly imposed by the Columbus project, only five racks are now allocated. The tasks of the Biolab scientific team were: (i) to define the scientific objectives of biological research in Columbus; (ii) to review the requirements of the industrial studies; and (iii) to design a multi-purpose facility compatible with the present constraints and satisfying the requirements of the biological investigations considered in the four studies. The Biolab team was able to define a facility capable of accommodating in five racks the following biological objects: small plants (up to 40 cm), insects like drosophila, frog eggs, single cells from animals, bacteria, slime molds and protozoa, as well as human physiology, but restricted to general diagnostic needs. The Biolab facility includes instruments and devices providing the capacity of holding and/or growing the organisms as well as to perform basic experimentation and a minimum essential diagnostic inflight. Within the growth unit the growth chambers/incubators are exchangeable, permitting the use of growth chambers of different sizes. The temperature will be adjustable to the requirements of the objects under investigation, i.e. either 20 or 37 degrees C. Thus a considerable level of flexibility will permit to investigate a broad spectrum of living systems.     

High-Speed Homopolar Inductor Alternators of Minimum Leakage Reactance

The leakage reactance of the machine is expressed as an equation involving slot leakage, end-connection leakage, differential leakage, stator-halves leakage, and tooth-top leakage reactance. This leakage reactance equation, or objective function, is then minimized under suitable constraints. Geometric programming is used to carry through the optimization procedure. A computer program is developed and applied to find the optimum leakage reactance for a 95 kVA, 208 V, wye-connected, 40 800 r/min aerospace alternator, using 8-, 10-, and 12-pole machines.     

Space radiation dosimetry with active detections for the scientific program of the second Bulgarian cosmonaut on board the Mir space station.

A dosimetry-radiometry system has been developed at the Space Research Institute of the Bulgarian Academy of Science to measure the fluxes and dose rates on the flight of the second Bulgarian cosmonaut. The dosimetry system is designed for monitoring the different space radiations, such as solar cosmic rays, galactic cosmic rays and trapped particles in the earth radiation belts. The system consists of a battery operated small size detector unit and a "read-write" and telemetry microcomputer unit. The sensitivity of the instrument (3.67 x 10(-8) rad/pulse) permits high resolution measurements of the flux and dose rate along the track of the Mir space station. We report our initial results for the period of the flight between the 7th and 17th June 1988.     

Cylindrical heterogeneous detonation waves

Further experimental studies of blast wave initiated cylindrical heterogeneous (liquid fuel drops, gas oxidizer) detonation waves are described. A pie-shaped shock tube, used for these studies, was altered in certain ways so as to improve the modeling of cylindrical waves. These modifications, along with some operational aspects, are briefly discussed. The breech of the facility, where the blast wave is generated by an explosive, became distorted with usage. Results are presented which show that lower detonation velocities are realized with the damaged breech (other conditions being the same). A photographic and pressure switch wave time of arrival study was made to ascertain the wave shape. Photographs are shown which show that the waves, blast as well as detonation, are close to cylindrical. However, in some cases there is appreciable distortion of the wave front by debris ahead of the wave. Presumably this debris comes from the blasting cap used to ignite the condensed explosive. A series of experiments was conducted using kerosene drops of 388 μm diameter dispersed in air through use of a large number of hypodermic needles. Radial fuel void regions were established by cutting off the fuel flow to a number of needles. Preliminary results relating to the effect of the size of the cloud gap on detonation velocity, quenching, and the initiator energy levels required for detonation are discussed.     

A Unique Digital Doppler Ambiguity Resolution Technique

This correspondence describes a unique digital Doppler ambiguity resolution technique for a pulsed S-band radar. Whereas conventional methods of resolving ambiguities employ various curve fitting schemes in which the best differentiated range curve fit is compared with the Doppler derived velocity, the method described here uses the opposite approach, i.e., the Doppler derived velocity is integrated and compared with the range change over the integrating interval. The integrating approach offers the following advantages over conventional curve fitting. 1) There are no lag errors due to velocity changes, other than tracker lag induced by jerk. 2) No large storage of past data points and their weighting Constants must be implemented.