直升机桨叶耐颗粒物/砂磨蚀标准分析

在分析研究直升机桨叶耐颗粒物/砂磨蚀标准主要技术要素的基础上,全面对比分析了MIL-STD-3033、ГОСТР52560-2006、GJB 1171-1991等国内外标准的基本内容,提出了装备研制及标准化工作相关建议。     

机电液压设备控制软件系统构架探讨

分析了机电一体化设备软件系统的需求特点.探讨了实用的控制软件系统构架和设计方法.提出了实时控制系统软件的开发工作流程和测试过程.     

偏转弹头导弹控制系统设计与仿真

根据弹头的可偏转特性,利用无根多刚体系统动力学方法建立了偏转弹头导弹的动力学模型,并对通道间的耦合特性及弹头偏转对弹体运动的影响进行了分析。在此基础上,将通道间的耦合及弹头偏转对弹体运动的影响作为干扰项处理,将气动参数的非线性变化等效为标称参数的摄动,利用变结构控制理论设计了偏转弹头导弹的控制器。仿真结果表明,所设计的变结构控制器能够有效地减小和消除俯仰、偏航通道对滚转通道的耦合作用以及弹头偏转对弹体运动的影响,较好地抑制了导弹气动参数的摄动,具有较高的稳态精度和良好的动态性能。     

基于容栅技术数显力矩扳手无线通信系统的设计

随着无线通信技术的飞速发展，许多电气电子系统中的数据传输方式逐步使用无线通信方式替代原来的有线数据通信方式。目前我公司使用的基于容栅技术的数显力矩扳手广泛应用于航空航天、兵器、船舶、铁路等领域，对数据测量、数据存储都有严格的要求，而传统的有线数据传输方式，将对测量环境带来了极大的限制，而且传输距离短、接线方式复杂，由于计算机传输接口有限，将给大量的数据传输带来不便。本文则使用一种低功耗芯片设计了一款无线通信模块，将目前数显力矩扳手的通信方式通过有线数据传输改为无线通信技术传输。这将给客户应用带来了极大的便利，适应了不同的环境，挺高了产品的性能和市场竞争力，可以达到多组设备数据同时显示到计算机上，该产品已经过测试验证可以达到预期的效果。     

航天器电线电缆寿命预测模型研究

随着航天器复杂大系统的高速发展，以及器上电子产品的广泛应用，使得电线电缆大量应用于复杂系统之间的功率输送和信号控制。在航天器运行过程中，电线电缆由于受到空间布局限制，交叉重叠；同时受振动、温度、空间辐射等外部环境影响，致使电缆老化进而引发其他电气故障。介绍了基于可测特征参数的寿命模型建立方法，得出电缆剩余寿命的预计模型，开展航天器电线电缆老化机制以及寿命预测模型研究，最终实现航天装备电缆寿命预测的能力。     

适应拓扑变化的拥塞最小化网络更新策略

软件定义网络的出现推动了航空集群机载网络的发展，同时也为机载网络的一致性更新带来了挑战。针对拓扑变化导致的网络更新期间可用路径失效问题，提出适应拓扑变化的拥塞最小化网络更新策略。首先，为减少可用路径失效带来的数据包丢失，在更新之前采用重路由机制进行处理；然后，针对重路由机制可能引起的网络拥塞，设计了贪婪流迁移算法缓解拥塞；最后，通过瞬时拥塞最小化更新算法完成整个网络更新。仿真结果表明：与传统的拥塞一致性更新算法相比，所提更新策略用规则开销、瞬时网络拥塞方面的少量提高换取了网络更新期间数据包丢失的显著降低。     

含天然与人工内部缺陷轮盘裂纹扩展特性对比分析

为达到应用人工内部缺陷获得轮盘裂纹扩展特性，开展了含天然与人工内部缺陷轮盘高速旋转低周疲劳裂纹扩展对比试验，并通过无损检测分析、断口分析研究了裂纹扩展特性的差异，提出了含人工缺陷轮盘损伤容限分析思路。无损检测更易识别人工内部缺陷的特征及其变化；人工缺陷区呈碎裂状，有大量的晶间断裂，与天然缺陷区有明显差异；非缺陷区两者无明显差异。天然与人工缺陷区的裂纹扩展速率分别为0.2-0.4μm/次、0.6-1.2μm/次，均远大于基体材料理论值；1#盘加载突变区外断口反推寿命与第二加载阶段循环数的最大误差是12%；2#盘缺陷区外断口反推寿命占总循环数的44.9%-51.9%。基于人工缺陷区定义初始裂纹，排除人工与天然缺陷差异的影响，可获得轮盘裂纹扩展特性。     

Adaptive optimization methodology based on Kriging modeling and a trust region method

Surrogate-Based Optimization (SBO) is becoming increasingly popular since it can remarkably reduce the computational cost for design optimizations based on high-fidelity and expensive numerical analyses. However, for complicated optimization problems with a large design space, many design variables, and strong nonlinearity, SBO converges slowly and shows imperfection in local exploitation. This paper proposes a trust region method within the framework of an SBO process based on the Kriging model. In each refinement cycle, new samples are selected by a certain design of experiment method within a variable design space, which is sequentially updated by the trust region method. A multi-dimensional trust-region radius is proposed to improve the adaptability of the developed methodology. Further, the scale factor and the limit factor of the trust region are studied to evaluate their effects on the optimization process. Thereafter, different SBO methods using error-based exploration, prediction-based exploitation, refinement based on the expected improvement function, a hybrid refinement strategy, and the developed trust-region-based refinement are utilized in four analytical tests. Further, the developed optimization methodology is employed in the drag minimization of an RAE2822 airfoil. Results indicate that it has better robustness and local exploitation capability in comparison with those of other SBO methods.     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.