基于球空间极近距离障碍物的超声检测方法

以机器人工作空间的障碍物检测为研究对象，提出了一种不同于传统的超声测距的新的检测方法——研究球空间极近距离障碍物的超声波测距理论和利用相关算法进行信号处理实现抗多径干扰，提高了超声波测量的精度。利用特殊分布的超声传感器阵列进行超声测距和球面三点定位的原理，不仅可以检测出障碍物的空间距离，还可以检测出障碍物的空间方位。     

亚毫米波的目标散射特性研究

对亚毫米波探测的优点及其应用方向进行了介绍,通过对国内现有实验条件的分析提出了目标亚毫米波相干散射特性建模、亚毫米波散射特性模拟测量方法、建立缩比模型和目标散射特性数据库等实验室亚毫米波散射特性研究的方法。     

Gamma-ray detector on board lunar mission Chang’E-1

Gamma-ray spectrometer (GRS) is included in the payload of Chinese first lunar mission Chang’E-1 that will be launched in 2007. Specific objectives of the GRS are to map abundance of O, Si, Fe, Ti, U, Th, K, and perhaps, Mg, Al, and Ca to depths of about 20 cm. There are remarkable advantages for GRS application to remote sensing elemental materials over the entire lunar surface: large effective area and good ability for background rejection. We will describe the design of GRS and present its performance in this paper. Moreover, the GRS calibration will also be introduced.     

基于图像处理技术的铝合金腐蚀等级评定方法

以LY12CZ铝合金试件加速腐蚀试验为基础,得到不同腐蚀时间下铝合金腐蚀形貌.采用基于二值特征提取的图像处理技术,确定LY12CZ铝合金的灰度闲值为0.25～0.3.并以此确定相应的孔蚀率,最终确定相应的腐蚀等级,以腐蚀等级作为铝合金腐蚀损伤的评价指标,为铝舍金腐蚀损伤演化规律表征提出新的思路.     

K-8 机襟翼限位机构可靠性建模及求解方法

所采用的建模方法比较完满地解决了Ｋ－８机襟翼限位机构（以下简称限位机构）的建模问题,建立了数学模型,以便进行机构的可靠性计算和设计;并在此基础上通过改变模型参数,使该建模方法同样适用于解决平面多杆机构的运动可靠性问题。     

Combustion modeling in a model combustor

The flow-field of a propane-air diffusion flame combustor with interior and exterior conjugate heat transfers was numerically studied.Results obtained from four combustion models,combined with the re-normalization group(RNG) k-ε turbulence model,discrete ordinates radiation model and enhanced wall treatment are presented and discussed.The results are compared with a comprehensive database obtained from a series of experimental measurements.The flow patterns and the recirculation zone length in the combustion chamber are accurately predicted,and the mean axial velocities are in fairly good agreement with the experimental data,particularly at downstream sections for all four combustion models.The mean temperature profiles are captured fairly well by the eddy dissipation(EDS),probability density function(PDF),and laminar flamelet combustion models.However,the EDS-finite-rate combustion model fails to provide an acceptable temperature field.In general,the flamelet model illustrates little superiority over the PDF model,and to some extent the PDF model shows better performance than the EDS model.      

CFM56发动机推力增大的技术途径浅析

对CFM56发动机不同系列和同系列不同型号的性能和结构的改进改型发展进行了分析,总结了CFM56发动机推力增大的技术途径。     

对容错代码及其实现策略的认识

本文分析了容错代码被忽略的原因并提出了实现全面容错的途径.     

蓝牙信息安全与密钥管理研究

从信号安全的角度出发，研究了蓝牙信息传输中的安全模式，对蓝牙技术的密钥管理方法等进行了分析，并提出了作者的评价意见。     

Re-entry of orbital debris observed by Chung-Li VHF radar with MEDAC

MEDAC (Meteor Echo Detection and Collection) system, a product of University of Colorado, has become part of Chung-Li VHF facilities since July 12, 1989. MEDAC is installed to observe the mesospheric winds from Doppler echos returned by meteor trails in the upper atmosphere. However, the time variations in the in-phase and quadrature components of the signals can be used to derive the time history of the meteor trail formation. The meteor flight speed in the atmosphere is hence deduced. Preliminary analysis of some data taken from July 12 to July 17 of 1989 indicates that there are some “meteor” trails that could have been produced by the reentry of orbital debris into the atmosphere. The criteria of the flight speed and the ionization height are used for selecting an orbital debris trail from pools of “meteor” trails. The relative flux intensities between the reentry orbital debris flux as tentatively identified in this paper and the meteor flux is about 1 to 100.