The WIND magnetic field investigation

The magnetic field experiment on WIND will provide data for studies of a broad range of scales of structures and fluctuation characteristics of the interplanetary magnetic field throughout the mission, and, where appropriate, relate them to the statics and dynamics of the magnetosphere. The basic instrument of the Magnetic Field Investigation (MFI) is a boom-mounted dual triaxial fluxgate magnetometer and associated electronics. The dual configuration provides redundancy and also permits accurate removal of the dipolar portion of the spacecraft magnetic field. The instrument provides (1) near real-time data at nominally one vector per 92 s as key parameter data for broad dissemination, (2) rapid data at 10.9 vectors s^–1 for standard analysis, and (3) occasionally, snapshot (SS) memory data and Fast Fourier Transform data (FFT), both based on 44 vectors s^–1. These measurements will be precise (0.025%), accurate, ultra-sensitive (0.008 nT/step quantization), and where the sensor noise level is <0.006 nT r.m.s. for 0–10 Hz. The digital processing unit utilizes a 12-bit microprocessor controlled analogue-to-digital converter. The instrument features a very wide dynamic range of measurement capability, from ±4 nT up to ±65 536 nT per axis in eight discrete ranges. (The upper range permits complete testing in the Earth's field.) In the FTT mode power spectral density elements are transmitted to the ground as fast as once every 23 s (high rate), and 2.7 min of SS memory time series data, triggered automatically by pre-set command, requires typically about 5.1 hours for transmission. Standard data products are expected to be the following vector field averages: 0.0227-s (detail data from SS), 0.092 s (detail in standard mode), 3 s, 1 min, and 1 hour, in both GSE and GSM coordinates, as well as the FFT spectral elements. As has been our team's tradition, high instrument reliability is obtained by the use of fully redundant systems and extremely conservative designs. We plan studies of the solar wind: (1) as a collisionless plasma laboratory, at all time scales, macro, meso and micro, but concentrating on the kinetic scale, the highest time resolution of the instrument (=0.022 s), (2) as a consequence of solar energy and mass output, (3) as an external source of plasma that can couple mass, momentum, and energy to the Earth's magnetosphere, and (4) as it is modified as a consequence of its imbedded field interacting with the moon. Since the GEOTAIL Inboard Magnetometer (GIM), which is similar to the MFI instrument, was developed by members of our team, we provide a brief discussion of GIM related science objectives, along with MFI related science goals.     

The elemental composition in energetic particle events at high heliospheric latitudes

The relative abundances of low energy ions (0.6–2.0 MeV/n) in solar energetic particle (SEP) and corotating interaction region (CIR) events have been measured by the EPAC experiment aboard Ulysses since launch in October 1990 until the present time. We give an overview of the abundances of heavy ions (He, C, Ne, Fe) relative to oxygen during energetic particle events lasting longer than 5 days during the in- and out-of-ecliptic phase of the mission. While the period Oct. 1990 to Aug. 1992 was dominated by high solar activity the Ulysses out of ecliptic passage at solar latitudes up to 45° went parallel to the declining phase of solar activity. Thus a very clear structure of corotating interaction regions was observed. While the in-ecliptic composition is in general agreement with measurements made near the Earth, the development of the CIR-composition shows two phases: From Aug. 1992 to May 1993 the C/O-ratio is 0.55–0.70, afterwards it increases to 0.8–0.9. This increase is correlated to the disappearance of the current sheet at 30° solar latitude reported by Smithet al. (1993).     

Pickup protons in the heliosphere

We calculate the conditions of pickup protons inside the termination shock. Outside 50 AU the partial pressure of pickup protons is greater than the magnetic pressure by a factor of > 10, and greater than the partial pressure of solar wind protons by a factor of > 100. Thus, pickup protons have a significant dynamical influence on the structures of the solar wind in the outer heliosphere.     

弯掠动叶叶尖径向间隙对气动──声学性能的影响

采用了两种修正叶尖径向间隙的方法:一种是利用实验结果减小径向动叶叶尖径向间隙,使之与弯掠动叶相同,弯掠动叶气动效率提高3%-4%,气动噪声降低2-3dB（A）,稳定工作范围扩大20%以上;另一种是利用修正公式（增大弯掠动叶径向间隙）计算弯掠动叶气动-声学性能。      

The atmospheric composition,extinction and luminosity of the LBV R71

ESO 3.6m Caspec spectra of the LMC luminous blue variable (LBV) taken at minimum have been analysed using NLTE model atmospheres and line formation calculations to derive atmospheric parameters and chemical composition. Using the silicon ionization balance and the hydrogen Balmer lines we deriveT _eff =17250, log g=1.80 and a microturbulent velocity of 15–20 km/s. The analysis yields abundance ratios by number of approximately 0.43 for He/H, 0.03 for C/N and 0.14 for O/N, implying that enrichment of the atmosphere by processed material has taken place. We have re-evaluated the reddening of R71 using IUE low resolution data and published UBVRIJHKL photometry and derive a value for A _V of 0.63. We also construct an extinction curve using archive IUE data for mid-B LMC supergiants and show that the extinction is anomalous; the 2175A bump being almost absent and the far UV rise very pronounced. A comparison of our model flux in theV-band with the observed (dereddened)V magnitude and the D.M. of the LMC (18.45), implies that the bolometric magnitude or R71 is –9.9. This is significantly higher than the value of –9.0 usually adopted for R71 and suggests that this object may not in fact be a subluminous LBV.     

铝锂合金的铸锭冶金（Ⅰ）

介绍了俄罗斯铝锂合金铸锭熔炼和铸造方法的发展和改进，评述了铝锂合金熔铸特点，熔体氧化，防护添加剂，熔剂和氩气防护，氧、碳、氮和氢等非金属夹杂，铸造裂纹敏感性，结晶状态，不均匀组织等方面的研究结果。     

The Freja Hot Plasma Experiment—Instrument and first results

The Hot Plasma Experiment, F3H, on boardFreja is designed to measure auroral particle distribution functions with very high temporal and spatial resolution. The experiment consists of three different units; an electron spectrometer that measures angular and energy distributions simultaneously, a positive ion spectrometer that is using the spacecraft spin for three-dimensional measurements, and a data processing unit. The main scientific objective is to study positive ion heating perpendicular to the magnetic field lines in the auroral region. The high resolution measurements of different positive ion species and electrons have already provided important information on this process as well as on other processes at high latitudes. This includes for example high resolution observations of auroral particle precipitation features and source regions of positive ions during magnetic disturbances. TheFreja orbit with an inclination of 63° allows us to make detailed measurements in the nightside auroral oval during all disturbance levels. In the dayside, the cusp region is covered during magnetic disturbances. We will here present the instrument in some detail and some outstanding features in the particle data obtained during the first months of operation at altitudes around 1700 km in the northern hemisphere auroral region.     

The Galileo Heavy element monitor

The Heavy Ion Counter on the Galileo spacecraft will monitor energetic heavy nuclei of the elements from C to Ni, with energies from 6 to 200 MeV nucl^-1. The instrument will provide measurements of trapped heavy ions in the Jovian magnetosphere, including those high-energy heavy ions with the potential for affecting the operation of the spacecraft electronic circuitry. We describe the instrument, which is a modified version of the Voyager CRS instrument.