Carbon dioxide and oxygen budgets of a plant cultural system in a CELSS--a case of cultivation of lettuce and turnips.

In order to collect basic data about CO2 and O2 budgets of a plant cultural system in a CELSS, the variation of the CO2 absorption rates of lettuce and turnips were observed during the growing period, under different conditions. The O2 release rates were deduced from the CO2 absorption rates multiplied by 32/44. As a result, when the light intensity, the photoperiod and the atmospheric CO2 concentration increased, the rates also increased. The effects on the turnips were more significant than those on the lettuce. Turnips at 310 micromoles/m2/s of PPFD, 24 hours of photoperiod and 1100 ppm of CO2 concentration grew most actively in the present experimental conditions. One turnip absorbed 32.3 g CO2 and released 23.5 g O2 for 6 days between 24 days and 30 days after sowing.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

Microbial processes in frozen food

Deep freezing of food and storage at −19°C is a standard conservation procedure in food technology. The lower limit of growth of bacteria in food is from about −5°C to about −8°C, whereas the reproduction limit of yeasts is 2 to 3°C lower. Storage temperatures above −10°C should therefore not be used. At −18°C, a commonly used storage temperature, no growth of microorganisms will occur. The microorganisms mainly found at the lower growth limit are Pseudomonas sp. and basidiomycete yeasts. The reduction in the number of microorganisms due to freezing, storage, and thawing is not of practical importance. Microbial enzymes, in particular lipases and proteases, are still active at −18°C. Therefore, the quality of raw products and good hygiene at the production site are most important.     

Numerical modelling of radiance of the presumed dust torus around Mars in the 0.350-1 μm spectral range

Currently conducted studies on modelling of scattered solar radiation in the 0.350-1.00 μm range along the Phobos orbit around Mars are presented. Our calculations include various types of grains, various densities and scattering angles. The calculations are performed with the aid of LOWTRAN7 program. These studies are directly related to the photometer coupled to PFS (Planetary Fourier Spectrometer) planned for the Mars-96 mission.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

Shuttle performance improvements through multiple database integration

The ability to model and analyze system performance is a key enabler when you are extending the operational life of complex systems. This is especially true when the system is operating in a hostile environment, such as space. This paper discusses a change made to the Space Shuttle main engines (SSMES) that affected the solid rocket booster (SRB) performance, and illustrates how databases maintained by the different subsystem contractors can be integrated, correlated, and evaluated to improve a subsystem component performance model. The enhanced model can be used not only for better prediction of component performance on the existing system, but can be used on upgrades to the system, or the next generation space shuttle solid rocket. motor.     

Paramecium--a model system for studying cellular graviperception.

Experiments under varied gravitational accelerations as well as in density-adjusted media showed that sensation of gravity in protists may be linked to the known principles of mechanosensation. Paramecium, a ciliate with clear graviresponses (gravitaxis and gravikinesis) is an ideal model system to prove this hypothesis since the ciliary activity and thus the swimming behaviour is controlled by the membrane potential. It has also been assumed that the cytoplasmic mass causes a distinct stimulation of the bipolarly distributed mechano-sensitive K+ and Ca2+ ion channels in the plasma membrane in dependence of the spatial orientation of the cell. In order to prove this hypothesis, different channel blockers are currently under investigation. Gadolinium did not inhibit gravitaxis in Paramecium, showing that it does not specifically block gravireceptors. Further studies concentrated on the question of whether second messengers are involved in the gravity signal transduction chain. Exposure to 5 g for up to 10 min led to a significant increase in cAMP.     

High Dynamic GPS Receiver Using Maximum Likelihood Estimationand Frequency Tracking

A new high dynamic global positioning system (GPS) receiver ispresented and its performance characterized by analysis,simulation, and demonstration. The demonstration receiver is abreadboard model capable of tracking a single simulated satellitesignal in pseudorange and range rate. Pseudorange and range rateestimates are made once every 20 ms, using a maximum likelihoodestimator, and are tracked by means of a third-order fadingmemory filter in a feedback configuration. The receiver trackspseudorange with rms errors of under 1 m when subjected tosimulated 50 g, 40 g/s circular trajectories. The tracking thresholdis approximately 28 dB·Hz, which provides 12 dB margin relativethe the minimum specified signal strength, assuming 3.5 dB systemnoise figure and 0 dB antenna gain.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

New instrumentation for optical measuring of oxygen in gas or dissolved in liquids.

The optical oxygen sensor is a novel device for the determination of oxygen in gases or dissolved in liquids. It is based on the measurement principle of fluorescence quenching, which is completely different from that of polarographic oxygen sensors (today the most widespread devices of oxygen detection). The new instrument offers features and advantages, which render it not only a realistic alternative, but, for specific applications, make it superior to existing electrochemical methods. The system is based on low-cost semiconductor devices (light-emitting diodes, photodiodes, low-cost analogue and digital components) and new LED-compatible oxygen-sensitive membranes. The flow cell of the instrument may be thermostatted and the sensor can be calibrated by a simple two-point calibration procedure. The optical oxygen sensor is particularly suitable for measuring dissolved oxygen in respirometry, since no oxygen is consumed by the device and the signal is independent of sample flowrate or stirring speed. Typical fields of application are monitoring of oxygen in ground and drinking water, in process control in bioreactors and in breath gas and blood gas analysis.