An alternate algorithm for discrete-time filtering

The discrete-time Kalman filter is an optimal estimator for the states of a linear, stochastic system. It assumes that measurements are linear combinations of the states, and all disturbances are Gaussian. The influence diagram, a decision analysis tool that provides an algorithm for discrete-time filtering equivalent to the Kalman filter when the influence diagram represents Gaussian random variables, is discussed. The influence diagram algorithm is a factored form of the Kalman filter, similar to other factored forms such as the U-D filter. Compared with the Kalman filter, it offers improved numerical properties. Compared with other factored forms, it offers a reduced computational load     

Residual stresses and endurance strength under tension-compression in the conditions of stress concentration

Residual stresses and endurance strength of specimens with stress concentrators are considered. The results obtained make it possible to predict the fatigue limit of strengthened parts with concentrators in the case of tension-compression.     

Statistical analysis of experimental study results on low-cycle fatigue resistance for the EI698-VD high-temperature alloy

The results of low-cycle fatigue tests of smooth cylindrical specimens made of the EI698-VD nickel-base high-temperature alloy widely used in aircraft engine industry are considered statistically. The influence of such factors as an initial level of mechanical properties, operating time and temperature of tests is evaluated. The experimental data on low-cycle fatigue (LCF) are used when determining the cyclic life for disks.     

On-board statistical detection and compensation of anomalous pilot-aircraft interactions

A statistical method for the on-board detection and compensation of adverse oscillations in pilot-aircraft systems is presented. A recursively updated linear model representing the pilot-aircraft system is used to continuously check for stability loss. The instability-related oscillations are detected early, using a statistical hypothesis test. Furthermore, a specially designed stability augmentation system assists the pilot during the instability periods. The method's effectiveness is demonstrated via data obtained from a flight simulator and a detailed simulation model.     

Robust wavelet neuro control for linear brushless motors

Design, simulation and experimental implementation of a wavelet basis function network learning controller for linear brushless dc motors (LBDCM) are considered. Stability robustness with position tracking is the primary concern. The proposed controller deals mainly with external disturbances, e.g. nonlinear friction force and payload variation in motion control of linear motors. It consists of two parts, one is a state feedback component, and the other one is a learning feedback component. The state feedback controller is designed on the basis of a simple linear model, and the learning feedback component is a wavelet neural controller. The attenuation effect of wavelet neural networks on friction force is first verified by the numerical method. The learning effect of wavelet neural networks on friction force is also shown in the numerical results. Then, a wavelet neural network is applied on a real LBDCM to on-line suppress the friction force, which may be variable due to the different lubrication. The effectiveness of the proposed control schemes is demonstrated by simulated and experimental results.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

The Impact of Variable Accelerations on Crystal Growth onboard Spacecraft by the Floating Zone Method

The numerical investigation of the impact of time-dependent accelerations (vibrations) on the flow and heat and mass transfer in the melt is carried out for the case of modeling the crystal growth by the floating zone method under conditions of microgravity that exist onboard spacecraft. The effects of the Archimedean buoyancy force and of vibrations of the free surface of fluid are considered separately. When solving the problem of the effect of the vibrations of the free surface of fluid, the previously obtained data were used. It is shown that vibrations of the free surface have a much stronger effect on the processes under consideration than the buoyancy. Some problems that are related to the newly discovered effects are discussed. The use of vibroprotected systems and a rotating magnetic field can help solve these problems. We plan to continue our investigations in future spacecraft experiments, in particular, at the International Space Station, which is under construction at the moment.     

Data Quantization for Narrowband Signal Detection

In automatic radar detection, digital integration of the envelope detector outputs is often used as a good approximation to the optimum. This requires quantizing the envelope detector outputs. In this paper, quantizer structures for narrowband signal detection are considered. Quantizer characteristics are derived to optimize performance as measured by the detector efficacy?an asymptotic performance measure. Asymptotic and finite sample performance results are presented. The results obtained are not limited in their application to Gaussian noise only, although this important case is given specific consideration.     

Interaction of artificially injected plasma flows with ionospheric plasma

Results of rocket experiments on study of plasma flows (PF) artificially injected by sources separated from vehicles and their effect on medium parameters in ionosphere at altitudes 160:230 km are presented.PF were injected comprising lithium ions with velocities 1,2 x 10⁴ m/sec. and cesium-potassium ions with velocities (1,4–1,5)x10³ m/sec. Mass flow rate in case of lithium PS is 2 mg/sec, and in case of cesium-potassium PS is 0,2 g/sec. During experiments mass-spectrometer measurements of ion medium content in ranges of different ion masses were held, disturbancies of electric fields with frequencies up to 20 kHz and electron flows with energies 0,7keV, 4,6keV and over 40 keV were controlled at distancies from 150m to (500–600)m between plasma source and scientific equipment.     

A global HF telecommand system for long duration balloon flights

An HF telecommand system for the control of long duration balloon flights at any point on the globe is described. The system proposed consists of a network of low-power transmitters operating at the same carrier frequency. The choice of transmitter frequency, power and location are presented. Control of the transmitters may be performed remotely by means of the public switched telephone network; an assessment of the error-rate in the system as a whole is given.