The FAST Satellite Fields Instrument

We describe the electric field sensors and electric and magnetic field signal processing on the FAST (Fast Auroral SnapshoT) satellite. The FAST satellite was designed to make high time resolution observations of particles and electromagnetic fields in the auroral zone to study small-scale plasma interactions in the auroral acceleration region. The DC and AC electric fields are measured with three-axis dipole antennas with 56 m, 8 m, and 5 m baselines. A three-axis flux-gate magnetometer measures the DC magnetic field and a three-axis search coil measures the AC magnetic field. A central signal processing system receives all signals from the electric and magnetic field sensors. Spectral coverage is from DC to 4 MHz. There are several types of processed data. Survey data are continuous over the auroral zone and have full-orbit coverage for fluxgate magnetometer data. Burst data include a few minutes of a selected region of the auroral zone at the highest time resolution. A subset of the burst data, high speed burst memory data, are waveform data at 2×10⁶ sample s^–1. Electric field and magnetic field data are primarily waveforms and power spectral density as a function of frequency and time. There are also various types of focused data processing, including cross-spectral analysis, fine-frequency plasma wave tracking, high-frequency polarity measurement, and wave-particle correlations.     

The 3-D Heliosphere from the Ulysses and ACE Solar Wind Ion Composition Experiments

The source region of solar wind plasma is observed to be directly reflected in the compositional pattern of both elemental and charge state compositions. Slow solar wind associated with streamers shows higher freeze-in temperatures and larger FIP enhancements than coronal hole associated wind. Also, the variability of virtually all compositional parameters is much higher for slow solar wind compared to coronal hole associated wind. We show that these compositional patterns persist even though stream-stream interactions complicate the identification based on in situ plasma parameters. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rigidity Dependence and Time Response of Cosmic Rays to the Modulation Steps in the Rising Part of Solar Cycle 23. Cospin/ket Results

Previous work on the latitudinal gradient and on the amplitude of the recurrent cosmic ray decreases, has shown that their magnitude does not decrease monotonically with the particle rigidity, but it presents a broad maximun around 1–2 GV. We have extended this analysis to study the behaviour of cosmic-ray particles during the modulation steps in the rising part of the solar activity of the present Solar cycle. We found that the ‘depth’ of the modulation step decreases monotonically with increasing rigidity and that the least energetic particles are the last to reach their minimum intensity value. We also considered in this analysis electrons of equal rigidity to study the influence of the charge sign on the particle behaviour during the modulation steps. This revised version was published online in August 2006 with corrections to the Cover Date.     

SAR ATR performance using a conditionally Gaussian model

A family of conditionally Gaussian signal models for synthetic aperture radar (SAR) imagery is presented, extending a related class of models developed for high resolution radar range profiles. This signal model is robust with respect to the variations of the complex-valued radar signals due to the coherent combination of returns from scatterers as those scatterers move through relative distances on the order of a wavelength of the transmitted signal (target speckle). The target type and the relative orientations of the sensor, target, and ground plane parameterize the conditionally Gaussian model. Based upon this model, algorithms to jointly estimate both the target type and pose are developed. Performance results for both target pose estimation and target recognition are presented for publicly released data from the MSTAR program     

气固紊流剪切流中颗粒弥散的拉格朗日模拟

本文提出了一种对于气固两相紊流剪切流中圆形固体颗粒弥散的拉格朗日拟计算方法，其中考虑了颗粒间的磁撞对流体相和颗料相的影响，应用该方法对一气固紊流剪切流场进行了模拟计算，并对有、无颗粒间磁撞情况下的模拟计算结果与Lavieville用大涡模拟方法的研究结果进行了比较，并进行了讨论。     

航空发动机用金属橡胶隔振器动静态性能的研究

以某型号航空发动机阻尼减振需求为背景,对开发研制的金属橡胶隔振器与现用的橡胶隔振器进行了动、静态实验研究。研究结果表明:金属橡胶隔振器的能量耗散性能、静态承载能力、过临界的能力及提供振动防护的区域都远远大于橡胶隔振器,而且通过改变金属橡胶隔振器的结构参数和预压缩量可以优化其隔振效果。研究结果为利用金属橡胶隔振器来改善航空发动机的振动状况提供了依据。     

Streamer Evaporation

Streamer evaporation is the consequence of heating in ideal MHD models because plasma is weakly contained by the magnetic field. Heating causes inflation, opening of field lines, and release of solar wind. It was discovered in simulations and, due to the absence of loss mechanisms, the ultimate end point is the complete evaporation of the streamer. Of course streamers do not behave in this way because of losses by thermal conduction and radiation. Heating is also expected to depend on ambient conditions. We use a global MHD model with thermal conduction to examine the effect of changing the heating scale height. We also extend an analytic model of streamers developed by Pneuman (1968) to show that steady streamers are unable to contain plasma for temperatures near the cusp greater than ∼ 2 × 10⁶ K. This revised version was published online in June 2006 with corrections to the Cover Date.     

UVCS Observations and Modeling of Streamers

We present results derived from the analysis of an equatorial streamer structure as observed by the UVCS instrument aboard SOHO. From observations of the H I Lyα and Lyβ lines we infer the density and temperature of the plasma. We develop a preliminary axisymmetric, magnetostatic model of the corona which includes the effects of gas pressure gradients on the magnetic structure. We infer a coronal plasma β > 1 in the closed field regions and near the cusp of the streamer. We add to the model a parallel velocity field assuming mass flux conservation along magnetic flux tubes. We then compute the Lyα emissivity and the line-of-sight integrals to obtain images of Lyα intensity, taking into account projection effects and Doppler dimming. The images we obtain from this preliminary model are in good general agreement with the UVCS observations, both qualitatively and quantitatively. This revised version was published online in June 2006 with corrections to the Cover Date.     

Investigation of the role of aziridine bonding agents on the aging of the composite solid rocket propellant(CSRP)

The role of bonding agents on the aging characteristics is one of the important research topics.Aging program of the prepared propellant samples was conducting as follows:Five samples,two free of bonding agents,and three containing an aziridine based bonding agents(MAPO,HX-752,MAT4),four samples based on different bonding and curing agents all were aged at 70 ℃.The prepared bonding agent "MAT4" gave remarkable improvements and resulted in highly stable mechanical properties comparing with HX-752 or MAPO.The selected bonding agents family inhibited the rate of decomposition of the propellants during the aging periods and supported the propellant matrix against decomposition at the elevated temperatures.      

The Electric Antennas for the STEREO/WAVES Experiment

The STEREO/WAVES experiment is designed to measure the electric component of radio emission from interplanetary radio bursts and in situ plasma waves and fluctuations in the solar wind. Interplanetary radio bursts are generated from electron beams at interplanetary shocks and solar flares and are observed from near the Sun to 1 AU, corresponding to frequencies of approximately 16 MHz to 10 kHz. In situ plasma waves occur in a range of wavelengths larger than the Debye length in the solar wind plasma λ _D ≈10 m and appear Doppler-shifted into the frequency regime down to a fraction of a Hertz. These phenomena are measured by STEREO/WAVES with a set of three orthogonal electric monopole antennas. This paper describes the electrical and mechanical design of the antenna system and discusses efforts to model the antenna pattern and response and methods for in-flight calibration.