Observations of auroral kilometric radio emission on the <Emphasis Type=Italic>Interball-1</Emphasis> satellite in the active Sun period 1999–2000

Results of almost two years (January 1999–October 2000) of continuous observations of auroral kilometric radio emission with the instrument AKR-X onboard the high-apogee satellite of the Earth Interball-1 are presented. The observations were conducted at the growth stage (in 1999) and in the maximum (2000) of solar activity within the 100–1500 kHz frequency band. The results of AKR detection in the vicinity of the maximum of its spectrum at a frequency of 252 kHz are presented. Both similarity (for example, the character of global directivity) and important differences from the AKR emission observed during the solar activity minimum [5] are found. Together with very high sporadicity, strong seasonal changes in the intensity are typical for the emission. It is completely absent in the spring-summer period in the Northern Hemisphere and is strongly suppressed in this period in the Southern Hemisphere. Probable nature of these features of AKR is discussed.     

Orbit determination for the GOCE satellite

Precise Orbit Determination (POD) for the Gravity field and steady-state Ocean Circulation Explorer (GOCE), the first core explorer mission by the European Space Agency (ESA), forms an integrated part of the so-called High-Level Processing Facility (HPF). Two POD chains have been set up referred to as quick-look Rapid and Precise Science Orbit determination or RSO and PSO, respectively. These chains make use of different software systems and have latencies of 1 day and 2 weeks, respectively, after tracking data availability. The RSO and PSO solutions have to meet a 3-dimensional (3D) position precision requirement of 50 cm and a few cm, respectively. The tracking data will be collected by the new Lagrange GPS receiver and the predicted characteristics of this receiver have been taken into account during the implementation phase of the two chains.     

Global comparison of the model results of GSM TIP with IRI for summer conditions

This paper presents the results of the numerical calculations thermosphere/ionosphere parameters which were executed with using of the Global Self-consistent Model of the Thermosphere, Ionosphere and Protonosphere (GSM TIP)and comparison of these results with empirically-based model IRI-2001. Model GSM TIP was developed in West Department of IZMIRAN and solves self-consistently the time-dependent, 3-D coupled equations of the momentum, energy and continuity for neutral particles (O₂, N₂, O), ions (O⁺, H⁺), molecular ions (M⁺) and electrons and largescale eletric field of the dynamo and magnetospheric origin in the range of height from 80 km to 15 Earth’s radii. The empirically derived IRI model describes the E and F regions of the ionosphere in terms of location, time, solar activity and season. Its output provides a global specification not only of N_e but also on the ion and electron temperatures and the ion composition. These two models represent a unique set of capabilities that reflect major differences in along with a substantial approaches of the first-principles model and global database model for the mapping ionosphere parameters. We focus on global distribution of the N_e, T_i, T_e and TEC for the one moment UT and fixed altitudes: 110 km, h_mF2, 300 km and 1000 km. The calculations were executed with using of GSM TIP and IRI models for August 1999, moderate solar activity and quiet geomagnetic conditions. Results present as the global differences between the IRI and GSM TIP models predictions. The discrepancies between model results are discussed.     

Laboratory calibration measurements of a piezoelectric lead zirconate titanate cosmic dust detector at low velocities

A cosmic dust monitor for use onboard a spacecraft is currently being developed using a piezoelectric lead zirconate titanate element (PZT). Its characteristics of the PZT sensor is studied by ground-based laboratory impact experiments using hypervelocity particles supplied by a Van de Graaff accelerator. The output signals obtained from the sensor just after the impact appeared to have a waveform that was explicitly related to the particle’s impact velocity. For velocities less than ∼6 km/s, the signal showed an oscillation pattern and the amplitude was proportional to the momentum of the impacting particle. For higher velocities, the signal gradually changed to a single waveform. The rise time of this single waveform was proportional to the particle’s velocity for velocities above ∼6 km/s. The present paper reports on results for the low velocity case and especially discusses the effect of an outer coating of the sensor with a paint, which is used to reduce heating by solar radiation.     

A study of the material density distribution of space debris

Material density is an important, yet often overlooked, property of orbital debris particles. Many models simply use a typical density to represent all breakup fragments. While adequate for modeling average characteristics in some applications, a single value material density may not be sufficient for reliable impact damage assessments. In an attempt to improve the next-generation NASA Orbital Debris Engineering Model, a study on the material density distribution of the breakup fragments has been conducted and summarized in this paper.     

Hybrid simulations of the O ion escape from Venus: Influence of the solar wind density and the IMF x component

As an initial effort to study the evolution of the Venus atmosphere, the influence of the solar wind density and the interplanetary magnetic field (IMF) x component (the x-axis points from Venus towards the Sun) on the O⁺ ion escape rate from Venus is investigated using a three-dimensional quasi-neutral hybrid (HYB-Venus) model. The HYB-Venus model is first applied to a case of the high-density (100 cm⁻³) solar wind interaction with Venus selected from the Pioneer Venus Orbiter observations to demonstrate its capability for the study. Two sets of simulations with a wide range of solar wind densities and different IMF x components are then performed. It is found that the O⁺ ion escape rate increases with increasing solar wind density. The O⁺ ion escape rate saturates when the solar wind density becomes high (above 100 cm⁻³). The results also suggest that the IMF x component enhances the O⁺ ion escape rate, given a fixed IMF component perpendicular to the x-axis. Finally, the results imply a higher ion loss rate for early-Venus, when solar conditions were dramatically different.     

Measurements of Energy of Cosmic-Ray Nuclei by Specific Energy Release at the Hadron Cascade Maximum

A method of measuring the particle energy in the range higher than 1 TeV based on detection of the maximum specific energy release in hadron cascades that develop in dense media is proposed and studied. This method makes it possible to improve the accuracy of energy measurements carried out with partial-absorption ionization calorimeters in the high-altitude studies of energy spectra of high-energy cosmic rays. The attainable accuracies of energy measurements are considered for light, intermediate, and heavy nuclei in iron and lead absorbers. The results of modeling are compared with the data of an experiment onboard the Kosmos-1713 satellite.     

A Method of Measuring Hydrogen Isotopes in Surface Layers of Planetary Soils by Spectroscopy of Recoil Protons in Alpha Particle Elastic Scattering

A theoretical and experimental feasibility study of possible determination of the hydrogen and deuterium concentrations in the surface layers of planetary bodies is presented. The method under study is the recoil proton and deuteron spectrometry of forward scattering in the course of elastic interaction of alpha particles with the nuclei of hydrogen isotopes. The spectra of recoil protons and deuterons were recorded using a prototype model of a hydrogen spectrometer, and these spectra were used to determine the hydrogen concentrations in the samples of different compositions.     

A Study of a Possible Method of Observing Solar Eclipses from Satellite Orbits

We study a possibility of observing the eclipses of the Sun by the Moon from satellite orbits. The scientific tasks planned to be solved onboard satellites are considered. The requirements for the observation of eclipses and for the appropriate satellite trajectories are formulated. A technique of the analysis and synthesis of such trajectories is developed, and some results of preliminary ballistic studies are presented. These results confirm the efficiency of observing the eclipses onboard satellites.     

INTERBALL-1 Observations of the Kilometric “Continuum” of the Earth's Magnetosphere

The electromagnetic radio-frequency emission of the inner region of the Earth's plasmasphere discovered recently by the GEOTAIL satellite [4] and referred to as the kilometric continuum was observed by the INTERBALL-1 satellite (1995–2000) in the 100–500 kHz band in the AKR-X experiment. During a period of low solar activity (1995–1997), this continuum was found leaving the inner plasmasphere at geocentric distances of 2–4R _E as isolated pencil-like (1°–6°) beams located in the magnetic equator plane. During a time of high solar activity (1999–2000), the occurrence of the emission was extremely rare (it was observed only at a considerable fall of this activity). If detected, at the same geocentric distances (2–4R _E) the continuum demonstrated a strongly variable and perturbed character, as well as a considerably larger extension of the beam over the geomagnetic latitude (10°–20° and more). In addition, quasi-periodic (QP) signals, similar to the observed QP emissions of Jupiter, were sometimes detected in this period. The probable nature of the observed features of the kilometric continuum is briefly discussed.