3D Imaging of the OH mesospheric emissive layer

A new and original stereo imaging method is introduced to measure the altitude of the OH nightglow layer and provide a 3D perspective map of the altitude of the layer centroid. Near-IR photographs of the OH layer are taken at two sites separated by a 645 km distance. Each photograph is processed in order to provide a satellite view of the layer. When superposed, the two views present a common diamond-shaped area. Pairs of matched points that correspond to a physical emissive point in the common area are identified in calculating a normalized cross-correlation coefficient (NCC). This method is suitable for obtaining 3D representations in the case of low-contrast objects. An observational campaign was conducted in July 2006 in Peru. The images were taken simultaneously at Cerro Cosmos (12°09′08.2″ S, 75°33′49.3″ W, altitude 4630 m) close to Huancayo and Cerro Verde Tellolo (16°33′17.6″ S, 71°39′59.4″ W, altitude 2272 m) close to Arequipa. 3D maps of the layer surface were retrieved and compared with pseudo-relief intensity maps of the same region. The mean altitude of the emission barycenter is located at 86.3 km on July 26. Comparable relief wavy features appear in the 3D and intensity maps. It is shown that the vertical amplitude of the wave system varies as exp (Δz/2H) within the altitude range Δz = 83.5–88.0 km, H being the scale height. The oscillatory kinetic energy at the altitude of the OH layer is comprised between 3 × 10⁻⁴ and 5.4 × 10⁻⁴ J/m³, which is 2–3 times smaller than the values derived from partial radio wave at 52°N latitude.     

Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates

The main purpose of the present work is to experimentally and numerically study why and how the magnitude of the bolt clamping force reduces in the aerospace structural bolted plates when they are subjected to a longitudinal tensile load. In the experimental method, a holed plate of aluminium alloy 7075-T6 was clamped using a single bolt fastener, and then tested under an increasing static longitudinal tensile load. The bolt clamping magnitude was determined by using the measured axial compressive strains of a steel bush placed between the nut and plate. Two clamped specimens with different initial clamping forces were studied. In each specimen the actual clamping forces were determined during the longitudinal loading on the plate. In the numerical method, a three-dimensional (3D) finite element model was generated in order to simulate and quantify the bolt clamping force in the plate model loaded in tension. Both experimental and numerical results showed that the clamping force reduces considerably in the aluminium bolted plates under the longitudinal tensile loading. This is because of the transverse contraction of the plate material that causes the clamped material to release from the initial compression, and as a result, the clamping force to relax.     

Cell-to-cell interactions in changed gravity: ground-based and flight experiments

Cell-to-cell interactions play an important role in all physiological processes and are mediated by humoral and mechanical factors. Mechanosensitive cells (e.g., osteocytes, chondrocytes, and fibroblasts) can be studied ex vivo to understand the effects of an altered gravity environment. In particular, cultured endothelial cells (EC) are very sensitive to a broad spectrum of mechanical and biochemical stimuli. Earlier, we demonstrated that clinorotation leads to cytoskeletal remodeling in cultured ECs. Long-term gravity vector changes also modulate the expression of surface adhesion molecules (ICAM-1, E-selectin, VCAM-1) on cultured ECs. To study the interactions of geterological cells, we cocultured endothelial monolayers and human lymphocytes, immune cells and myeloleucemic (K-560) cells. It was found that, although clinorotation did not alter the basal adhesion level of non-activated immune cells on endothelial monolayers, the adhesion of PMA-activated lymphocytes was increased. During flight experiments onboard the Russian segment of the International Space Station, we measured the cytotoxic activity of natural killer (NK) cells incubated with labeled target cells. It was found that immune cells in microgravity retained their ability to contact, recognize, and destroy oncogenic cells in vitro. Together, our data concerning the effects of simulated and real microgravity suggest that, despite changes in the cytoskeleton, cell motility, and expression of adhesion molecules, cell-cell interactions are not compromised, thus preserving the critical physiological functions of immune and endothelial cells.     

HORACE: A compact cold atom clock for Galileo

HORACE (HOrloge à Refroidissement d’Atomes en Cellule = clock based on atoms cooled from vapour cell) is a compact cold caesium atom clock developed in SYRTE at Paris Observatory. This clock can operate both on ground and in microgravity environment. Design of HORACE is based on isotropic light cooling, allowing performing the whole clock sequence (cooling, atomic preparation, Ramsey interrogation and detection) at the same place. Compared to more conventional cold atom clocks such as atomic fountains, the use of isotropic light cooling simplifies both the optical part of the setup and the detection sequence, and leads to a drastic size reduction of the physics package. Very good short-term performances have been demonstrated at SYRTE since relative frequency instability of 2.2 × 10⁻¹³ τ^−1/2 has been obtained. Optimization of the long term stability is still under progress and current results show relative frequency instability around 3 × 10⁻¹⁵ in 10⁴ s of integration. With these performances, HORACE appears as a good candidate both for Galileo’s ground segment clock and for onboard Galileo clock.     

ALTEA: anomalous long term effects in astronauts. A probe on the influence of cosmic radiation and microgravity on the central nervous system during long flights.

The ALTEA project participates to the quest for increasing the safety of manned space flights. It addresses the problems related to possible functional damage to neural cells and circuits due to particle radiation in space environment. Specifically it aims at studying the functionality of the astronauts' Central Nervous Systems (CNS) during long space flights and relating it to the peculiar environments in space, with a particular focus on the particle flux impinging in the head. The project is a large international and multidisciplinary collaboration. Competences in particle physics, neurophysiology, psychophysiology, electronics, space environment, data analyses will work together to construct the fully integrated vision electrophysiology and particle analyser system which is the core device of the project: an helmet-shaped multi-sensor device that will measure concurrently the dynamics of the functional status of the visual system and passage of each particle through the brain within a pre-determined energy window. ALTEA is scheduled to fly in the International Space Station in late 2002. One part of the multi-sensor device, one of the advanced silicon telescopes, will be launched in the ISS in early 2002 and serve as test for the final device and as discriminating dosimeter for the particle fluences within the ISS.     

A Study of Vibrations of Space Station Structure Elements on the Basis of Video Information

Cosmic Research - The results of the Sreda–MKS space experiment showed that visual data on the vibrations of the ISS structural elements allow one to acquire quantitative characteristics of...     

The brief history of experimental research of cosmic ray variations in Yakutia

Some unknown historical facts of cosmic ray studies in the north-east of the former Soviet Union related to the Yakutsk scientific group are reported for the benefit of the international scientific community. It focuses on the founders of Yu.G. Shafer Institute of Cosmophysical Research and Aeronomy of Siberian Branch of Russian Academy of Sciences. A chronology of measurements of cosmic ray intensity variations since 1949 in Yakutia (Sakha Republic; NE Siberia) is given. In particular, for the first time the data of the first solar cosmic ray event registered at Yakutsk (GLE04), with a small ionization chamber S-2 (volume: 20 L) are presented. Moreover, the data of the large ionization chamber ASK-1 (volume: 950 L) for the 1953–2003 period useful for specialists in the field of cosmic ray variations are also shown.     

Pickup protons in the heliosphere

We calculate the conditions of pickup protons inside the termination shock. Outside 50 AU the partial pressure of pickup protons is greater than the magnetic pressure by a factor of > 10, and greater than the partial pressure of solar wind protons by a factor of > 100. Thus, pickup protons have a significant dynamical influence on the structures of the solar wind in the outer heliosphere.